Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, abrasion-resistant suction hose designed specifically for the transfer of fuels, other liquid hydrocarbons, or for use as a general-purpose antistatic hose. Lighter and more flexible than standard rubber hoses, it has buoyancy (remains on the surface) in fresh and saltwater. Flat when at rest, which facilitates handling and storage. Intended for the transfer and transshipment of petrochemical products, oils, and fuels in refineries, industry, and transportation. Used for fueling ships, cleaning tanks, firefighting, and military applications. Meets the requirements of MIL-PRF-370J for liquid fuel hoses. Antistatic - features two externally longitudinally arranged copper wires ensuring electrical continuity between the hose ends easily accessible for proper connection to fittings (R < 0.02 Ω/m, exceeds the requirements of MIL-PRF-370J). The inner surface of the hose is smooth, causing no flow loss. Resistant to abrasion, weather conditions, hydrolysis, ozone, fuels, and commonly used chemicals (recommended pH range: 5 to 9). Resistant to longitudinal loads during unwinding and dragging. Hose material: polyurethane (PUR) embedded in the braid during the hose extrusion process. Working pressure: from 7 bar to 11 bar - depending on the hose diameter (the specified working pressure for fuel). Operating temperature: from -50°C to +50°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight smooth-walled PTFE hose with antistatic properties and excellent chemical resistance. The conductivity and dissipation of electric charges are achieved by the addition of up to 2.5% carbon black - PTFE AS. This allows for a reduction in the resistance of the hose material and meets the requirements of the EN12115 standard, which requires resistance between the ends of the hose to be less than 106 Ω/m. The hose is particularly intended for aggressive chemically non-conductive substances, such as organic solvents, whose flow in a standard Teflon hose can cause the accumulation of electric charges and associated hazards. High purity and distribution of the carbon additive in PTFE ensure compliance with FDA 21 CFR 178.3297 regarding materials approved for temporary contact with food. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). The use of high-quality plug couplings is possible. Safety factor n=4:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Material: antistatic PTFE (Teflon), black. Shore hardness (D): 60. Working pressure: from 5.5 to 12 bar. Operating temperature: from -200°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° ELBOW RADIATOR intended for engine cooling systems in vehicles and automotive-type engines (for water, ethylene glycol-based coolants). Meets the requirements of standard SAE J20 R4 Class D-1. Available with arm lengths of 200, 250, and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the elbow diameter. Operating temperature: from -40°C to +125°C. Safety factor (burst pressure / maximum working pressure) 3:1. coupling material: black EPDM rubber. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 135° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 2 bar to 8.12 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for unleaded gasoline, diesel oil, and liquid fuels containing up to 50% aromatic compounds. Used in industry and transportation for the transfer and handling of petrochemical products, in tank trucks, at road and rail loading and unloading terminals for fuels. Inner layer made of black, smooth, antistatic (R ≤ 10^6 Ω) NBR rubber (NBR1). Reinforced with layers of high-strength cord. Equipped with two copper wires ensuring electrical continuity between the hose ends, provided that they are properly connected. Outer layer made of black, antistatic (R ≤ 10^6 Ω) synthetic rubber, self-extinguishing, resistant to abrasion, oil, ozone, and weather conditions. Wall resistance across the hose R ≤ 10^9 Ω (type M/T). Compliant with standards EN12115:11 (16 bar), EN 1761 (10 bar), ISO 2929 (10 bar), TRbF. Excellent resistance to petrochemical products, strong construction, and antistatic properties of both inner and outer layers, built-in antistatic wires, recommend this hose for demanding applications, including in explosion hazard zones. In any case, however, use in explosion hazard zones (ATEX) should be preceded by a risk analysis conducted by a specialist. A version without wire (type Ω/T) is available on special order. Inner layer: black, smooth NBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +90°C (temporarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong general-purpose PVC hose with specially reinforced wall and braid construction. Good resistance to kinking. Designed for water, air, and light chemicals in agriculture, horticulture, and industry. Inner layer: black PVC. Reinforcement: polyester braid. Outer layer: yellow PVC. Working pressure at 20°C: 10 bar. Operating temperature: from -5°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose for oils and fuels. Lighter and more flexible than standard rubber hoses. Flat at rest, facilitating handling and storage. Designed for the transfer and loading of petrochemical products, oils, and fuels in refineries, industry, and transportation. Used for fueling ships, cleaning tanks, firefighting, and military applications. The hose is constructed with a high-strength polyester-polyamide braid, fully embedded in an NBR/PVC compound. It features copper wires ensuring electrical continuity between the hose ends—provided proper connection to the fittings. The inner surface of the hose made of NBR/PVC is smooth, causing no flow loss, while the outer surface made of NBR/PVC is slightly longitudinally ribbed, enhancing abrasion resistance and protection against contact with hot elements. Externally resistant to abrasion, ozone, weather conditions, oil, fuels, and a wide range of chemicals. Does not require cleaning and drying. Resistant to longitudinal loads—during unwinding and pulling (the longitudinal force should never exceed 1/3 of the specified breaking strength; the installation of fittings should consider the longitudinal force). Standard color is greenish-gray (army green). Hose material: greenish-gray NBR/PVC compound embedded in a polyester-polyamide braid during the hose extrusion process. Working pressure: from 16 to 20 bar, depending on the hose diameter. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber molded hose without reinforcement, flexible and stretchable (in diameter) with a special corrugated shape, ensuring resistance to kinking when bending and the ability to cut into sections of required length. Produced in lengths of 1 m, which can be cut and easily shaped in installation. Available in a basic version made of EPDM rubber, for water, cooling fluids, resistant to diluted acids and bases, at elevated temperature and ozone. Operating temperature range from -40°C to +135°C (TUBANO) and in a version with increased external oil resistance, made of a different synthetic rubber. Operating temperature range from -30°C to +120°C (TUBANO OIL). Hose material: molded EPDM rubber. Working pressure: 1.5 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal flexible rubber pressure hose, intended for air, cold and hot water, and light chemicals (except acids). Resistant to acetates and ketones. Can be used for dispersive water-based epoxy and polyurethane paints. Not suitable for oils, fuels, aromatic hydrocarbons, cellulose paints, chlorinated rubber, and others containing aromatic solvents (e.g., toluene, xylene) or gasoline. For chemical applications, we recommend contacting Tubes International. The hose has a strong construction and low elongation under pressure. Suitable for use on reels. Inner layer electrically conductive (R<106 Ω, EN ISO 8031), outer layer resistant to ozone and weather conditions. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA - polyvinyl alcohol). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry ice blasting hose – granulated solid carbon dioxide. Dry ice cleaning is used for removing coatings, adhesives, residues, etc., in various industrial sectors. The advantages of the process include no damage to the cleaned surface, no aggressive chemicals, no water in the process (compared to high-pressure water cleaning), and no abrasive residue (compared to sandblasting). Dry ice (solid carbon dioxide) has a temperature of up to -78.5°C (melting point), in granulated form, and sublimates to gas during the process. The DRY ICE hose is specifically designed for the transport of dry ice. The inner layer is smooth, made of anti-static synthetic rubber resistant to abrasion and low temperatures. The outer layer is anti-static, abrasion-resistant, weather-resistant, and ozone-resistant. It is fitted with quick couplings and specialized dry ice cleaning guns. Inner layer: black synthetic rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -55°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for conveying wine, fruit juices, beer, and water, with smaller diameters. Can be used with drum reels. Completely free of animal-derived ingredients, phthalates, plasticizers, and nitrosamines. Highly resistant to cleaning and disinfection processes used in the food industry. Inner layer is tasteless and odorless. Outer layer is abrasion and aging resistant. Standards and requirements: Food industry, food contact 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA, D.M. 21/03/73, BfR II. Inner layer: white smooth technopolymer. Reinforcement: synthetic braid. Outer layer: blue smooth technopolymer. Working pressure: 10 bar. Operating temperature: -20°C to +80°C (temporarily up to +90°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft fuel hose made of special NBR rubber resistant to methyl ester of fatty acid rapeseed oil (RME). Reinforcement with synthetic textile braid. Outer layer made of chloroprene rubber (CR), antistatic, self-extinguishing, resistant to abrasion, temperature, and aging. Particularly recommended for biofuels based on methyl esters of fatty acids (FAME) such as biodiesel B10, B20, B100. Resistant to methyl ester of fatty acid rapeseed oil (RME). Can also be used for regular diesel fuel. Inner layer: special NBR rubber. Reinforcement: synthetic textile braid. Outer layer: CR rubber. Working pressure: 15 bar. Operating temperature: from -30°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight transparent smooth-walled hose made of natural (non-regenerated) fluoropolymer PFA (perfluoroalkoxy), a material with properties similar to PTFE. The hose features excellent chemical resistance, dimensional and shape thermal stability, a very smooth, micropore-free internal and external surface, high pressure resistance, and crack resistance due to excessive stress. Good transparency of the hose allows for easy observation of level or flow. UV resistant. Designed for low-pressure installations of aggressive chemicals or when high purity and chemical inertness of the hose material are required. Commonly used in laboratories, chemical and pharmaceutical industries. Due to its excellent insulating properties (dielectric strength 3 to 4 times greater than PTFE), it is used in the electronics and semiconductor industries. The hose is not antistatic (does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic plug connections. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Safety factor n = 4:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Hose material: PFA. Shore hardness (D) 60. Operating temperature: from -200°C to +260°C. Working pressure: from 7 bar to 19.5 bar - depending on the diameter and wall thickness of the hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSmoothbore Teflon hose version with reinforced wall made of specially processed Teflon (reduced microporosity) for use with high-pressure gases and other penetrating substances, in double steel braid. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C increase in temperature. Installation: use AF-TL series fittings and sleeves... Hose material: smooth PTFE. Reinforcement: double braid of 304 steel. Working pressure: from 180 bar to 225 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCHEMFLUOR TH hose is a flexible Teflon hose designed for high-pressure hydraulic, pneumatic, and gas installations. The inner layer made of conductive Teflon prevents the accumulation of electrostatic charges. Hose material: black, conductive PTFE. Reinforcement: AISI 304 steel braid. Operating temperature: from -50°C to +200°C. Working pressure: 345 bar. Burst pressure at 20°C: 1100 bar. Burst pressure at 200°C: 820 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The heavy-duty HW version is recommended for harsher working conditions, gases (up to 100 bar), and applications where there are cyclic temperature changes. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a 4:1 factor is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for the hose AF-HWDB-10 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: double braid of AISI 304 steel. Working pressure: from 40 bar to 350 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. A double braid should be used for higher pressures and where there is (within permissible limits) greater bending or kinking of the hose. Due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance of R<10^8 Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a factor of 4:1 is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for hose AF-SWDB-08 is: 250 bar – (170°C-130°C) x 0.75 = 250 bar – 30% = 175 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: double braid of AISI 304 steel. Working pressure: from 70 bar to 360 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon hose tube is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The braid is made of annealed AISI 316 steel wire, with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. Safety factor 3:1; if a 4:1 factor is required (e.g., according to EN 16643), values should be multiplied by 0.75. At operating temperatures above +130ºC, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1ºC above this temperature. For example, at a temperature of 170ºC, the maximum working pressure for the hose AF-SWSB-316-06 is: 240 bar – (170ºC-130ºC) x 0.75 = 240 bar – 30% = 168 bar. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 316 steel. Working pressure: from 80 bar to 240 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for the transport and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). The inner layer is made of black, smooth NBR/PVC rubber blend. Reinforcement with layers of durable synthetic cord. It features copper wires ensuring electrical continuity between the hose ends – provided there is proper connection to the fittings. The outer layer is made of chloroprene rubber (CR), flame-retardant, resistant to oil, seawater, abrasion, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms, successfully utilized in land applications. Higher working pressure versions (20 bar, 27 bar) are also available upon special order, with specified breaking strength under tension (2T for 2”, 4T for 3”, and 7T for 4”, 5”, and 6”) and ABS type approval for the complete hose. Inner layer: black NBR/PVC rubber. Reinforcement: synthetic cord. Outer layer: black CR rubber. Working pressure: 17 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible suction hose designed for the transfer and distribution of liquid products in the petrochemical industry, containing up to 50% aromatic hydrocarbons (e.g., diesel, heating oil, gasoline with up to 50% aromatics). Suitable for fueling pumps. Inner layer made of black, smooth synthetic rubber. Reinforcement with synthetic cord. Features two copper wires ensuring electrical continuity between the hose ends (resistance R < 100 Ω between ends) – provided that the wires are correctly connected to the ends. Outer layer made of high-quality synthetic rubber resistant to oil and weather conditions. Hose compliant with the requirements of standard EN 1360:2013 type 1 class M for fuel distribution systems. Available in lengths up to 120 meters. Inner layer: black synthetic rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong fuel transfer hose for aviation fuel, designed for direct pressure refueling of aircraft. It can also be used in fuel transfer operations in airport tankers – dispensers, in cases not requiring high vacuum. It can be wound on reels. Suitable for aviation fuel for turbine engines (aviation kerosene, e.g., Jet A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Inner layer made of black, smooth NBR rubber. Reinforcement with layers of high-strength synthetic cord. Outer layer made of black, antistatic synthetic rubber, resistant to abrasion, weather conditions, and contact with oil. Antistatic outer layer, in accordance with EN ISO 1825 requirements, ensures the required low resistance of the hose between the ends (103 Ω < R < 106 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type C/Ω) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Hoses with fluorescent marking visible at night and a transfer hose with an antistatic cord (type B/M) are available upon special request. Inner layer: black NBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTraditional, well-known, and proven over the years, hose made of natural red rubber. Easy to install due to its softness (hardness 45° Shore – A), flexibility, and elasticity. Resistant to abrasion, with low permeability for gases and good resistance to acids and bases. Used for liquids and gases for various industrial applications and in laboratories. Meets FDA requirements for food contact. Sterilization by steam for 30 minutes (1 bar, 141°C) or ethylene oxide. Full hose roll length is 25 m. The specified working pressure is determined relative to the burst pressure with a safety factor of 1:5. Material: natural rubber (NR). Operating temperature: from -30°C to +70°C (125°C for moist heat). Brittleness temperature: -40°C. Hardness: 45° Shore (A). Density: 1.13 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality PVC hose intended for water. Can be used for the transmission of drinking water (short-term contact with drinking water) – has been issued a compliance certificate in the Czech Republic according to the requirements of 409/2005 Sb for this application (contact Tubes International). For use in industry, agriculture, horticulture, and domestic applications. Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure at 20°C: from 10 bar to 17 bar - depending on the diameter of the hose. Operating temperature: from -5°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the 1/4" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 900 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in a 1/2" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the pipes. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x13.5 cm or 100 cm. Material: acetal. Working pressure: up to 2 bar. Maximum flow: 1700 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the 3/8" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1500 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the 1/4" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1136 l/hour. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsOil, grease, and hot chip resistant hose designed for low-pressure delivery of liquid or gaseous coolant during metal processing. It features a so-called shape memory, allowing for precise direction of the coolant flow. Supplied as ready-made hoses with an external BSP threaded connection ending with a metric external thread. Material: black PVC. Reinforcement: steel guiding cover, diameter DN 10 has an additional spiral cover made of nickel-plated steel sheet. Working pressure: 4 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong, and flexible pressure hose with steel reinforcement and an outer layer resistant to oil, for conveying saturated and superheated steam. The inner layer has good resistance to high temperature and saturated steam. It can be temporarily used for superheated steam at a temperature of 232°C and pressure of 18 bar; prolonged use with superheated steam reduces the hose's lifespan. The outer layer is resistant to oil, temperature, weather conditions, abrasion, and aging. The hose is used in the chemical, petrochemical, and energy industries, and in other industrial applications, particularly where resistance of the outer layer to oils, greases, and other petrochemical products is required. It is not intended for steam cleaners ("dry steam cleaners"). For steam, use special screw-on fittings designed for steam. To extend lifespan, the hose should be emptied of steam after use to avoid condensate accumulation. The VAPOFER EN ISO 6134 hose is antistatic (R ≤106Ω), compliant with standard EN ISO 6134/05 type 2 class B (Ω). Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double steel wire braid. Outer layer: black synthetic rubber, microperforated. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in a 3/4" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x15 cm or 100 cm. Material: acetal. Working pressure: up to 1.4 bar. Maximum flow: 1900 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial high-pressure water hose for snow guns, resistant to abrasion, aging, rot, UV radiation, weather conditions, and ozone. Designed for continuous operation at high pressure. Flexible at low temperatures. With an outer yellow coating, it is highly visible on snow, even in twilight. Supplied with CAMLOCK type fittings (socket C and plug E) in a high-pressure version of 60 bar made of AISI 316 stainless steel. Other lengths of DN52 hoses are also available (e.g., 25, 30, and 40 m). Maximum hose length is 60 m. Inner layer: EPDM rubber. Reinforcement: double polyester braid. Outer layer: yellow, special abrasion-resistant coating. Working pressure: 60 bar. Operating temperature: from -40°C to +80°C (water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with internal NPT thread in 1/2" system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% position stability and does not cause damage to cutting tools. Standard length: 350 mm. Number of segments: 14 pcs. Material: acetal. Working pressure: up to 2 bar. Maximum flow: 1700 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with internal NPT thread in 1/4" system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensures 100% position stability and does not cause damage to cutting tools. Standard length: 360 mm. Number of segments: 20 pcs. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 900 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with internal NPT thread in 3/8" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and not causing damage to cutting tools. Standard length: 360 mm. Number of segments: 16 pcs. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1500 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with external NPT thread in 1/2" system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensures 100% position stability and does not cause damage to cutting tools. Standard length: 350 mm. Number of segments: 14 pcs. Material: acetal. Working pressure: up to 2 bar. Maximum flow: 1700 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with external NPT thread in 1/2" LOC-LINE® system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% position stability and does not cause damage to cutting tools. Available lengths: 400 mm, 500 mm, and 600 mm. Material: acetal. Working pressure: up to 2 bar. Maximum flow: 2173 l/hour. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with external NPT thread in 1/4" system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and not causing damage to cutting tools. Standard length: 360 mm. Number of segments: 20 pcs. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 900 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with external NPT thread in 1/4" LOC-LINE® system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Available lengths: 400 mm, 500 mm, and 600 mm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1136 l/hour. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with external NPT thread in 3/8" system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, ensuring rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, providing 100% position stability and not causing damage to cutting tools. Standard length: 360 mm. Number of segments: 16 pcs. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1500 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReel of coolant hose made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available in four sizes (diameter 1/4", 3/8", 1/2", and 3/4"). Available length: 15 m. Material: acetal. Working pressure: up to 3 bar, depending on diameter. Maximum flow: 1700 l/hour, depending on diameter. Operating temperature: up to +65°C.
