Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric plug 30 mm standard for PIV valve, for panel mounting. Cable diameter: PG11. Color: black or transparent.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1/2" with external thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEO plug with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. Plug with O-ring for use with CJ-H-14860 rotary socket... Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLOCTITE 243 is a medium-strength removable anaerobic adhesive suitable for all metal threaded connections. It prevents loosening of parts subjected to vibrations, such as bolts, nuts, or pins. It works on all metals, including passive substrates (e.g., stainless steel, aluminum, and plated surfaces). It features tolerance to light contamination from industrial oils, such as engine oils, corrosion inhibitors, and coolants. Color: blue. Maximum thread diameter: up to M36. Operating temperature range: from -55°C to +180°C. Breakaway torque for bolts: 26 Nm. Time to achieve initial strength: 15-30 min (depending on the material). Time to achieve full strength: 3-24 h (depending on the material). Certifications: P1 NSF Certificate No: 123000. Packaging - container of 10 ml or 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for CEJN series 232 quick coupling socket with a chain to protect against contamination and damage. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd cap with internal trapezoidal thread compliant with DIN EN 12713 standard, fully compatible with threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotating sling intended for wall mounting ECODORA series E-304, E-354, and E-434. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable throttle valve type FPB used in hydraulic systems as a flow control element. Flow regulation is achieved via a knob. Permissible flow direction: A → A1, A1 → A. Material: carbon steel, galvanized (body), plastic (knob). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality high-pressure two-way shut-off ball valve designed for precision instrumentation for the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipe or panel mounting. The valve features high sealing integrity (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Pneumatic actuated valves available. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar respectively. Body material: AISI 316 steel (ASTM A351 CF8M, casting) - for the 206 bar version; AISI 316 steel (ASTM A-276, forging) - for the 413 bar version. For the low-pressure version (206 bar), a brass version is available. Ball material: AISI 316 steel. Lever material: nylon, brass insert; standard lever color is black (other colors available, metal lever, lever with padlock ISLT). Ball and stem sealing: modified PTFE (PCTFE, PEEK option). Working pressure (dependent on temperature/seal material - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent on seal material - see chart): from -34°C to +210°C (modified PTFE). Connection: BSP thread. NOTES! Ball valves are designed to operate in either fully open or fully closed positions. Valves have factory-adjusted packing seal for 70 bar pressure. Due to varying operating conditions, periodic adjustment of the seal may be required using the stem sealing screw (after removing the lever). Preliminary adjustment is recommended before starting the installation by tightening the sealing screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal one-piece ball valve type 2017K with reduced flow and lever lock, intended for industrial installations. It can be used for air, gases, water, steam, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. The working pressure depends on the operating temperature. Body material: stainless steel CF8M. Ball material: stainless steel CF8M. Lever material: stainless steel AISI 304. Ball sealing: PTFE / RTFE. Stem sealing: PTFE. Connection: BSP thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard jaw set for FINN-POWER type P16 crimping press. Material: surface-hardened steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGUILLEMIN connector with internal BSP thread intended for industrial and handling installations of bulk substances and granulates. Not suitable for the transmission of steam and gases. The connector has a symmetrical design of the connection part. Manufactured according to standard EN 14420-8/NF-E-29572. Material: AISI 316 steel. Working pressure: 16 bar. Sealing: black FKM-VITON rubber. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal drum for water and air, complete with a PVC hose, designed for wall mounting. The guiding arm has five mounting positions, allowing the drum to be installed in any convenient position. A robust swivel connection, serving as the flow path for the medium, and the fittings and sleeves are made of brass. The retractable spring is specially matched to the hose length, with rounded edges, which increases the lifespan of the mechanism. Used in automotive workshops, repair shops, gas stations, gardens, paint shops, etc. Material: powder-coated carbon steel. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDST type adapter with external metric thread, 60° cone sealing. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect socket with external NPT thread, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional heavy-duty couplings with balls and protective sleeves, it has a very low weight. Ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. Highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose with a thick wall, designed for the discharge of chips, bulk materials, granules, etc. Suitable for all types of industry, particularly commonly used for discharging chips and other solid particles in the wood, furniture, ceramics, and plastics industries. The thick wall and dense reinforcing spiral ensure high pressure parameters. Very smooth on the inside, low compressibility, and flexible - even at low temperatures. Excellent abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: ECO – standard version, ECO SE – version made of flame-retardant material (UL94 V-2), ECO AS – permanently antistatic version (ISO 8031: R <109 Ω, TRGS 727 (6.4.2.4): R <2.5 x 108 Ωm, directive 2014/34/EU (ATEX): can be used in specific explosion hazard zones after risk analysis), ECO SE AS – antistatic and flame-retardant version (available on special request). The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials from recycled clean production waste, renewable energy, closed water circulation, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 1.4 mm. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSPT type A15 elbow with external thread intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling, type R21, designed for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for water installations, seawater, cooling water including treatment agents, drinking water, acids and bases in low concentrations, salt solutions, esters, and ketones. Not suitable for mineral oils, cooling water with anti-corrosive agents containing oil, or oil-laden air. Marked on the single sleeve with a red stripe. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +100°C (temporarily +120°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of mineral oils, vegetable and animal fats, aerosol oils, water with added anti-corrosive substances. Inner layer: NBR rubber. Reinforcement: nylon cord. Outer layer: CR rubber. Flanges: galvanized carbon steel. Operating temperature: from -30°C to +90°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of hot and cold water, water with the addition of treatment agents, industrial water, seawater, glycol, weak acids, bases, esters, and ketones. Not intended for conveying media containing oil. BV (Bureau Veritas) certification. Inner layer: EPDM rubber. Reinforcement: nylon cord. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: from -30°C to +90°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with external metric thread, 24° cone, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand protection cream - is a traditional skin protection agent during work with oily and greasy contaminants, as well as with strongly adhering dirt. It protects the skin while working with oils, fats, paints, graphite, soot, tar, polyester resin, silicone mass, and mineral fiber. Packaging - bucket 1000 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing coupling with internal BSP thread intended for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUNI-FLEX S type pipe clamp designed for connecting and repairing metal and plastic pipes (non-fixed axial connection, flexible - only with rubber gasket). Application: water, water-based fluids, sewage, light chemicals, air. Material version: AISI 316Ti steel (housing, screws - class A4-80, solid pins). Sealing: EPDM rubber. Operating temperature: from -30°C to +125°C. Nominal pressure: PN 16 (pressure class for shipbuilding and marine applications; safety factor 4:1, assuming a positive result from a one-time pressure test at four times the maximum pressure, after which the clamp cannot be reused). Maximum operating pressure: 25 bar (for other industrial applications and static conditions; safety factor 1.5:1, assuming a positive result from a pressure test at 150% of the maximum operating pressure, after which the clamp can be reused multiple times). The working pressure values apply to the installation of clamps on round steel pipes with a minimum wall thickness, installation according to the instructions, and tightening with a torque wrench specified on the clamp. Available version with incomplete pins, version "L" (example index: UN-FLEX-L-...).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick rubber cover limiting the possibility of hose kinking at the end and restricting the minimum bending radius. For use with standard high-pressure cleaning hoses DN8, DN10, or DN12. Cover color: blue, black, red, gray, yellow.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGLOW is a photoluminescent version of the PROTECTOR cover designed to protect hoses (hoses) or hose bundles from abrasion, impacts, and crushing. It ensures visibility of hoses even in low light conditions. It glows for over 12 hours and can be charged by any light source. It contains no harmful materials or halogens. UV resistant. Color: yellow with photoluminescent edges. Material: polyethylene (HDPE) + photoluminescent compound. Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMKH closing ring for TW transfer connections. To be used with MKV sealing ring. Together they form the MK connection. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Intended for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: brass. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure water gun SG31 with extension lance for industrial applications. Suitable for hot and cold water. The lever mechanism does not require the operator to exert significant force, resulting in comfortable and pleasant operation. The outlet part is finished with an internal thread M22x1.5. The gun is available in versions with a fixed or rotating connection to the installation. Housing material: high-strength plastic. Working pressure: up to 280 bar. Maximum pressure: 310 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun with a rubber nozzle (attachment) designed for removing all contaminants from delicate surfaces: liquids, fine shavings, chips, etc. Lightweight construction and ergonomic shape ensure easy and comfortable use. The gun is equipped with a rubber nozzle (attachment) that protects sensitive surfaces from scratches and damage during operation. The lever mechanism allows for precise dosing of the flowing medium. Compliant with OSHA standard 1910.95 (b) and directive 2003/10/EC. Body material: acetal. Nozzle / attachment material: galvanized steel / NBR. Sealing: NBR. Working pressure: 16 bar. Operating temperature: from -10°C to +80°C. Flow rate: 380 l/min (at 8 bar pressure). Sound intensity: 85 dB (at 8 bar pressure). Blowing force: 3.92 N.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShort bottom plate for welding for the installation of a complete double DIN 3015 clamp type 301. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWall mounting bracket for the SPEEDFIT system used in compressed air installations. 90° angled coupling mounted to the wall. One side finished with a fitting for a tube (SPEDDFIT system), the other side has an internal BSP thread. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: right. The specified maximum working pressure applies to continuous operation. Material: housing – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial water nozzle with adjustable outlet. EPDM rubber ring protects against mechanical damage. Available in a long version. Material: brass. Housing: high-strength plastic (acetal). Nozzle: 7 mm or 10 mm. Connection: BSP thread. Working pressure: 16 bar. Flow rate: 75 l/min (6 bar) or 150 l/min (6 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement connection M16x2 with metal cap. The coupling has a standard according to ISO 15171-2, M16x2 thread on the measurement tip side, and an appropriate connection for hydraulic installation with external JIC thread (7/16"-20 UNF, 37° cone) or metric (M16x2). Material: steel with zinc-nickel coating. Working pressure: from 450 bar to 630 bar - depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with plastic cap).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPipes with a seam for pressure applications made of stainless steel in accordance with standard EN 10217-7 (DIN 17457). Annealed pipes, longitudinally welded by TIG, HF, or laser with a smooth, matte, pickled surface. Weld coefficient v = 1.0. Tolerances D3 / T3. Testing category TC1 or TC2 – depending on the batch. With material certificate EN 10204 3.1. These pipes are characterized by good pressure resistance and can be used for pressure equipment subject to the Pressure Directive (2014/68/EU, PED). Commonly used in the industry for the construction of installations and pipelines. Material: AISI 304/304L (1.4301/1.4307), AISI 316L (1.4404). Standard pipe length (one section): 6 m. Shipping in sections: 1 m or 2 m, longer sections upon agreement of transport costs.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape intended for the production of hose clamps for hoses of any diameter. Standard length: 25 m. Tape width: 8 mm or 14 mm. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSCQ silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 35 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: up to 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC tee with external BSP thread, equipped with a gasket and 2x internal BSP threads. Material: polypropylene. Gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
