Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing tee with internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality multifunctional flexible hose produced in the United Kingdom. Designed for water, air, and light chemicals. The hose material is free from phthalates, silicone, and cadmium, compliant with RoHS and WEEE regulations. According to EU requirements, use for food products is possible after conducting the required migration tests using appropriate model fluids simulating the specific type of food (the material used for hose production complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing according to UL94-V2 and UL94-HB (at a thickness of 3 mm). Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: red (R) or blue (BL) PVC. Working pressure: from 10 bar to 18.3 bar - depending on the hose diameter. Operating temperature: from -20°C to +55°C (temporarily +65°C, cold bending temperature down to -45°C). As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPTFE flat gasket UBW140 for use in the most demanding conditions. Due to its many unique properties, it is applihose in all areas of industry. Operating temperature: from -200°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKMU gasket intended for the socket of the KLAUDIA lever coupling. Material: EPDM. Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transfer of liquid chemicals, including aggressive acids, bases, alcohols, and other detergents used for cleaning installations in food processing plants (selection according to the principles in the "Chemical Hoses" section of this catalog). The inner layer made of UPE complies with FDA requirements for food contact. Widely used in the food, cosmetic, chemical, and petrochemical industries. It features a copper wire ensuring electrical continuity between the hose ends. The outer layer is resistant to abrasion, ozone, and weather conditions. Compliant with EN 12115:11 requirements (type M, resistance between hose ends R ≤ 100 Ω, guaranteed for hoses up to 40 m in length). Standards and requirements: 1) Chemical hoses EN 12115:2011. Food industry, food contact (inner layer) 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Installation: use smooth fittings with a spigot ("tail" to the hose) without sharp or high ribs that could cut or damage the inner UPE layer when tightened. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Installation with clamp sleeves or shell clamps. Inner layer: white polyethylene UPE. Reinforcement: synthetic cord, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 16 bar. Vacuum: 0.8 ÷ 0.9 bar - depending on the hose diameter. Operating temperature: -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed specifically for transporting cooling water, used in metallurgical furnaces, transformer cooling systems, and electrical converters. Used in steel metallurgy. The outer layer is coated with fiberglass resistant to heat radiation up to +550°C (temporarily) and splashes of hot materials. The inner layer is insulating (dielectric), R>10^11Ω, resistant to electrical breakdown E≥6000 V/mm, with increased resistance to water and steam penetration under extreme operating conditions. The minimum bending radius in the technical specifications is given for pressures above 3 bar. Inner layer: light blue, insulating EPDM rubber. Reinforcement: synthetic cord. Outer layer: EPDM rubber coated with fiberglass. Working pressure: 20 bar. Operating temperature: from -35°C to +120°C, external up to +550°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose with an extended temperature operating range compared to standard hydraulic hoses. Confirmed hose lifespan of 400,000 impulse cycles. Standards: exceeds EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 80 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +135°C (temporarily +150°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made according to platinum-enhancing technology of exceptional purity, intended for biotechnological applications. Resistant to high temperatures, ozone, radiation, moisture, and atmospheric conditions. Does not adsorb or absorb odor or taste. Can be repeatedly sterilized in an autoclave as well as with ethylene oxide or radiation. Meets FDA, USP Class VI, ISO 10993, European Pharmacopoeia 3.1.9, and Japanese Pharmacopoeia - Chapter 51 requirements. Safety factor 5:1. Material: transparent silicone. Hardness: 50° Shore (A). Density: 1.17 g/cm³. Operating temperature: from -65°C to +260°C. Hose length: 7.62 m, 15.24 m, or 30.48 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSUPER FLEX hose reinforced with polyester and steel spiral is designed for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with fluorocarbon rubber is recommended. Standard length: 1000 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers + steel spiral (wire thickness 1.2 mm). Working pressure: from 2 bar to 8.12 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, glassy transparent, flexible hose free of odor and taste, non-toxic, phthalate-free and BPA (Bisphenol A) free. Designed for the transfer and dispensing of food products, particularly dairy products, spices, vitamin concentrates, flavors, etc. The smooth, non-porous inner surface of the hose eliminates the problem of product particle settling and bacterial growth. Resistant to alkaline cleaning agents. Can be used with peristaltic pumps (moderate lifespan). Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). Sterilization by steam or ethylene oxide is possible. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full roll length of the hose is 15 m (from an inner diameter of 50.8 mm - 6 m). Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong pressure hose with an inner layer made of chemically resistant ultra-high molecular weight polyethylene (UPE, UHMWPE). The inner layer is resistant to most acids and bases as well as many other aggressive chemicals (at elevated but not very high temperatures), making the hose widely used in the chemical and petrochemical industries. The UPE inner layer also complies with food hose requirements, free from phthalates and polycyclic aromatic hydrocarbons (PAH), features a low friction coefficient during flow, and prevents medium deposition on the walls. This significantly facilitates cleaning and allows for use in the cosmetic, pharmaceutical, and food industries as well. Reinforced with synthetic cord, built-in copper wires for electrostatic discharge. The outer layer is made of chemically resistant EPDM rubber, resistant to abrasion, ozone, and weather conditions. Compliant with EN 12115:2011 requirements (type M, resistance between hose ends R ≤ 100 Ω, guaranteed for hoses up to 40 m in length). Standards and requirements: Chemical hoses: EN 12115:2011. Food industry, contact with food (inner layer): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50°C. Inner layer: white creamy UPE polyethylene. Reinforcement: synthetic cord. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 116 quick coupling plug with internal thread and valve designed for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1500 bar (connected coupling). Burst pressure: 3000 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 3/4" with external thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug NiTO made of AISI 316L stainless steel with a double hose end. Used in conditions with increased hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., a 1/2″ socket with a 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK ERS connector plug with a smooth end for hoses made according to the American military standard MIL-C-27487 (A-A-59326). Commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug for grease fittings type DIN 71412 A, DIN 71412 B, and DIN 71412 C. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotating sling intended for wall mounting of ECODORA drums series E-544. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-check valve type FPSU used in hydraulic systems as a component to allow free flow in one direction. The flow throttled in the opposite direction is regulated using a knob. Standard opening pressure 0.5 bar. Permissible flow direction: A → A1 (free), A1 → A (throttled). Material: carbon steel, galvanized (body), steel (spring, ball, knob). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe electric valve SOV L belongs to the LINE ON LINE® family, finished with Fox series couplings (hose-to-hose) and can be connected with other products in series or parallel. Despite its small size, SOV L valves are electrically controlled indirectly, which gives them very high operating parameters. Special polyurethane seals embedded on the shaft ensure a long lifespan of the valve. The exhaust air can be silenced by a built-in silencer. Each valve has monostable manual control and an activation indicator – an LED. Operating pressure: 2.5 ÷ 7 bar. DC voltage: 24V. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled. Nominal flow: 380 l/min - Ø6, 700 l/min - Ø8 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4330 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP thread/GZ BSP. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFoam and washing set: NITO I COMBI gun (NT-53105A1), cleaning agent tank with foam injector, suction hose, and dosing nozzle set, 17 cm lance with washing nozzle. Maximum working pressure: 6 bar. Maximum operating temperature: +40°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard jaw set for FINN-POWER type P20 crimping press. Material: surface-hardened steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGUILLEMIN coupling with hose end, with lock (mounting with a shell clamp, compression sleeve, or straps) intended for industrial and bulk material handling installations, granules. Not suitable for steam and gas transmission. The coupling has a symmetrical design of the connection part. Manufactured according to standard EN 14420-8/NF-E-29572. Material: aluminum. Working pressure: 16 bar. Sealing: white NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external thread connector, type VSL, with a smooth tail for hose, for EN 14420-3 / DIN 2817 clamp (only clamps RS 636... and RS-637...), for installation on industrial hoses - e.g., in handling applications. Also available in AISI 316 stainless steel coated with E-CTFE fluoropolymer lining and conductive CF-E-CTFE lining (R <106 Ω), suitable for very aggressive chemical substances. Working pressure: 25 bar (for AL version - 16 bar, PP - 6 bar). Connector material: brass (MS), AISI 316 stainless steel (SS), galvanized steel (ST), aluminum (AL), polypropylene (PP). Sealing: flat (face). Operating temperature: from -20°C to +65°C according to EN-14420.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-shaped tee fitting with internal thread (sealing on the front surface) and external UNF thread (o-ring in the groove of the flat front surface), type EVL. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete reel designed for the transmission of air, cold and hot water, and detergents. For installation indoors and outdoors. The retractable spring tested for 30,000 winding and unwinding cycles. Compliant with ATEX directive II 3 GD c IIB TX. Standard equipment includes a high-quality polyurethane hose with a bend protection spring and a swivel coupling allowing free operation with connected tools, e.g., pneumatic tools. Length of the supply hose: 1.5 m. Material: AISI 304 steel. Sealing: viton. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal DM adaptor with internal BSP thread is designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all types of media: water, air, chemical substances, petrochemical products. Depending on the size, material of construction, and manufacturer, the fittings have various shapes of flange for a wrench. Material: AISI 316 steel. Sealing: flat gasket (PTFE).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor made of high-quality polypropylene reinforced with fiberglass, food-safe, intended for use with the most popular and commonly used plastic barrels for storing raw materials (200 liters). The tight connection on the external thread DIN EN 12713 is guaranteed by an O-ring seal. Material: fiberglass-reinforced polypropylene. Seal: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic drum reel made of stainless steel designed for cold and hot water, oil, lubricants, and other media. The retractable spring tested for 25,000 winding and unwinding cycles. Compliant with ATEX directive 94/9 IIB 2GD c T4 T135C X. Includes hose bumper. The drum is not equipped with a hose, which must be ordered separately. Rotating suspension or additional fixed suspension for quick disassembly (e.g., in winter) ordered separately. Advantages: rotating connection made of AISI 304 steel, viton sealing. Material: AISI 304 steel. Sealing: viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and very flexible suction and discharge hose, designed for general industrial applications (in industry, construction, agriculture). It can be used for water, light chemicals, sludges and wastewater, plant protection products, other liquids (without fats, oils, and hydrocarbons) as well as for air, vacuum transport of dust, powders, granules, and other lightly abrasive bulk materials (non-greasy). Abrasiveness and potential static electricity issues should be considered. Reinforced with a hard PVC spiral, impact-resistant, providing good vacuum resistance and preventing hose collapse. The smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is slightly corrugated, with smooth surfaces for small diameters. As a hose reinforced only with a hard PVC spiral, lacking a braid, it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. Hose material: green transparent PVC. Reinforcement: hard PVC spiral. Working pressure at 20°C: from 2 bar to 6.5 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -25°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick, flexible hose designed for suction and transport of abrasive bulk materials, granulates, roofing gravel, industrial cleaning, abrasive for sandblasting, silos, bulk material tankers, etc. Compliant with DIN 26057 Type 4 (SMARTFLEX® 2.0). Antistatic and flame-retardant, ensuring high workplace safety. Thick wall and dense, robust reinforcing spiral provide high resistance to vacuum. Smooth inside, non-compressible, not very flexible but elastic, even at low temperatures. Very good abrasion resistance, also resistant to microbes and hydrolysis. Free from halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal flow direction of the medium is marked with an arrow. The wall thickness of the hose is measured between the spiral. Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ωm, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective grounding of the spiral on both sides, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – according to DIN 4102 class B1. Wall thickness measured between the spiral: 2.0 mm (SMARTFLEX® 2.0), 2.5 mm (SMARTFLEX® 2.5). Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil 30 mm O8 for solenoid valves CNOMO 060580. Insulation class: F155. Voltage tolerance: -10% to +10%. Protection degree: IP65 EN60529 with connector. Connector shape: DIN 43650 shape A. Continuous duty cycle: 100% ED.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, ergonomic blue shower nozzle for spraying vegetables, fruits, fish, work surfaces in the food industry, large kitchens, and catering establishments. Made of FDA-compliant polyamide (PA66), with an internal valve made of stainless steel. Seals made of EPDM. Connection: 1/2" BSP male thread. Working pressure: up to 8 bar. Operating temperature: up to +80°C. Weight: 0.26 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 3/4" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° elbow with internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 180° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 2 bar to 8.12 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBearing plug end with O-ring for high-pressure gun. Prevents hose breakage. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance without a nozzle with MT2 thermal insulation intended for a high-pressure washer. Connections: (inlet) GZ 1/4" BSP / (outlet) GZ 1/4" BSP. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTeflon-impregnated thread sealant tape for securing and sealing threaded connections in metal and plastic piping systems. Applied directly from the container with a built-in cutting blade ensures speed and cleanliness of installation. It does not harden; immediate sealing occurs under full pressure. The product has DVGW/KTW approval for use in gas and drinking water installations, as well as NSF/ANSI certification, Standard 61. Color: white. Maximum thread diameter: R4". Operating temperature range: from -55°C to +130°C.
