Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull-flow quick coupling socket Nitto Kohki series TSP CUPLA with internal BSPT thread, featuring excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Particularly recommended for high-viscosity fluids such as lubricants. Material: carbon steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull-flow quick coupling socket Nitto Kohki series TSP CUPLA with external BSPT thread, featuring excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Particularly recommended for high-viscosity fluids such as lubricants. Material: carbon steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull-flow quick coupling socket Nitto Kohki series TSP CUPLA with hose end of excellent durability, intended for water, hydraulic oils, steam, chemicals, air, and gases. Particularly recommended for high-viscosity fluids such as lubricants. Material: carbon steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN series 320 quick coupling socket (DN 7.6) in VS version (disconnection without pressure to avoid the risk of recoil, compliant with ISO 4414 and EN 983 standards) with a hose fitting for versatile use in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Manufactured according to Eurostandard 7.6. Working pressure: 12 bar (safety factor 4:1). Flow rate: 1900 l/min (Pe = 6 bar, Δp = 0.5 bar). Material: galvanized steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN10.4 quick coupling socket in ESAFE version (disconnection without pressure to avoid the risk of recoil, compliant with ISO 4414 and EN 983 standards) with external BSPT thread or internal BSP thread. Versatile use in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Manufactured according to Eurostandard DN10. Working pressure: 16 bar. Flow rate: 4000 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/galvanized steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN10.4 quick coupling socket in ESAFE version (disconnection without pressure to avoid the risk of recoil, compliant with ISO 4414 and EN 983 standards) with hose fitting. Versatile use in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Manufactured according to Eurostandard DN10. Working pressure: 16 bar. Flow rate: 4000 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/zinc-coated steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN series 310 quick coupling socket (DN 5.3) in STANDARD version with external BSPT or NPT thread for versatile use in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Manufactured according to ISO 6150B and A-A59439 standards (former U.S. MIL C4109 1/4″ standard). External threads are coated with a sealing compound. Working pressure: 16 bar. Burst pressure: 140 bar. Operating temperature: from -20°C to +100°C. Flow rate: 925 l/min (Pe = 6 bar, Δp = 0.5 bar). Material: galvanized steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN5.3 quick coupling socket in ESAFE version (disconnection without pressure to avoid the risk of recoil, compliant with ISO 4414 and EN 983 standards) with external BSPT or internal BSP thread. Versatile use in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Working pressure: 16 bar. Flow rate: 950 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/zinc-coated steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket CEJN DN5.3 in ESAFE version (disconnection without pressure to avoid the risk of recoil, compliant with ISO 4414 and EN 983 standards) with a hose fitting. Versatile use in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Working pressure: 16 bar. Flow rate: 950 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/zinc-coated steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN7.6 quick coupling socket in ESAFE version (disconnectable without pressure to avoid the risk of recoil, compliant with ISO 4414 and EN 983 standards) with external BSPT or internal BSP thread. Versatile use in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Manufactured according to Eurostandard DN7.2. Working pressure: 16 bar. Flow rate: 2250 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/zinc-coated steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN7.6 quick coupling socket in ESAFE version (disconnection without pressure to avoid the risk of recoil, compliant with ISO 4414 and EN 983 standards) with hose fitting. Versatile use in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Manufactured according to Eurostandard 7.2. Working pressure: 16 bar. Flow rate: 2250 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/galvanized steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN series 320 quick coupling socket (DN 7.6) in VS version (disconnection without pressure to avoid the risk of recoil, compliant with ISO 4414 and EN 983 standards) with BSPT external thread for versatile applications in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Manufactured according to Eurostandard 7.6. Working pressure: 12 bar (safety factor 4:1). Flow rate: 1900 l/min (Pe = 6 bar, Δp = 0.5 bar). Material: galvanized steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN series 410 quick coupling socket (DN 10.4) in STANDARD version with hose end for versatile applications in the industry, mainly in pneumatic installations. Operated with one hand with minimal force required for connection. Working pressure: 16 bar (safety factor 8.75:1). Flow rate: 3900 l/min (Pe = 6 bar, Δp = 0.5 bar). Material: galvanized steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble quick-connect socket with free flow designed for cold and hot water. Material: brass (balls, spring - stainless steel). Working pressure: 16 bar. Sealing: EPDM (approved for KTW, DVGW W270 for drinking water). Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement quick-connect socket SNAP-CHECK manufactured in Sweden, designed for pressure measurement in hydraulic systems. Quick-connect plugs made of hardened steel are permanently installed in the hydraulic system, while the quick-connect sockets are connected by a hose to the pressure gauge. Connection of the socket to the plug is possible under pressure up to 300 bar. The working pressure for the plug not connected to the socket is 600 bar, and the minimum burst pressure is 2400 bar. The working pressure for the connected socket and plug is also 600 bar, while the minimum burst pressure is 1300 bar. The precise manufacturing of the quick-connects ensures the tightness and reliability of the measurement points in the hydraulic system. The connection range for measurement plugs allows for easy configuration of the connection. Quick-connect sockets are supplied as standard with red plastic caps. Working pressure: 600 bar. Switching pressure: up to 300 bar. Body material: galvanized steel. Sealing: NBR. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket QC6 compliant with Standard Instrumentation, with valve, with external thread NPT, BSPT, or BSP. QC4 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested for leak tightness. Interchangeable with quick couplings of Instrumentation standard from other manufacturers. Material: AISI 316 steel. Working pressure: 103 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket QC6 compliant with Instrumentation Standard with valve, featuring LET-LOK® connection. QC6 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for leakage. Interchangeable with Instrumentation standard quick couplings from other manufacturers. Material: AISI 316 steel. Working pressure: 103 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSNAP-TITE quick coupling socket with internal BSP and NPSF thread, American-made, without valve. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Working pressure: up to 690 bar (depending on the size of the quick coupling), safety factor 2:1. Material: AISI 316 steel. Sealing: NBR (operating temperature: from -35°C to +120°C), viton (operating temperature: from -26°C to +204°C). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SNAP-TITE quick coupling socket with internal BSP thread, manufactured in the USA, features a unique valve design that allows for laminar flows. Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 345 bar (depending on the size of the quick coupling), safety factor 2:1. Material: AISI 316 steel. Sealing: NBR (operating temperature: from -35°C to +120°C), EPR (operating temperature: from -56°C to +120°C), viton (operating temperature: from -26°C to +204°C). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SNAP-TITE quick coupling socket with internal BSP thread, manufactured in the USA, features a unique valve design that allows for laminar flows. Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 448 bar (depending on the size of the quick coupling), safety factor 2:1. Material: carbon steel, galvanized. Sealing: NBR (from -35°C to +120°C). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMH-24 quick coupling socket with internal BSP thread for lances, guns, and high-pressure hoses. Material: stainless steel. Working pressure: 400 bar. Operating temperature: +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with internal BSP thread and valve designed for cold and hot water. The double-sided seal of the socket seals both the plug and the threaded connection to the installation, ensuring high durability. Material: brass (balls, spring - stainless steel). Working pressure: 16 bar. Sealing: EPDM (approved for KTW, DVGW W270 for drinking water). Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect socket with internal BSP thread, with and without shut-off valve, resistant to ultraviolet radiation, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. Ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. Very efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: UV polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with internal BSP thread, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. The ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki HI CUPLA series socket with internal BSPT thread, featuring excellent durability and vibration resistance. Designed for water installations. Material: brass. Working pressure: 10 bar. Operating temperature: from -20°C to +80°C (NBR). Flow rate: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki HI CUPLA series socket with external BSPT thread, featuring excellent durability and vibration resistance. Designed for connecting pneumatic tools to air installations. Material: AISI 304 steel. Working pressure: 15 bar. Operating temperature: from -20°C to +80°C (NBR). Flow rate: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with external NPT thread, without valve, intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting two parts of the coupling relative to each other. Their design allows for easy one-handed operation, and the characteristic click ensures a secure connection. Versions with a valve and in black color are also available. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] - total length. Material: acetal. Working pressure: up to 6.9 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with external NPT thread, without valve, intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting two parts of the coupling relative to each other. Their design allows for easy one-handed operation, and the characteristic click ensures a secure connection. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] - total length. Material: polypropylene. Working pressure: up to 6.9 bar. Operating temperature: from 0°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling socket with external NPT thread designed for washing installations, deionized water filtration, industrial automation, leak detection, etc. The characteristic design (does not include balls and a protective sleeve) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling socket with external NPT thread intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. The characteristic design (does not include balls and a protective sleeve) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket without valve with external thread UNF 11/16″-18. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket with external thread UNF 7/16″-20 with a 90° cone. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket with external thread valve UNF 11/16″-18. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEO socket with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with shut-off valve for diagnostic quick coupling, with external NPT thread, used for pressure measurement in hydraulic systems. Manufactured according to ISO 15171-1 and SAE J1502 standards, interchangeable with connectors from other manufacturers. Quick coupling plugs made of hardened steel are permanently installed in the hydraulic system, and the quick coupling sockets are connected by a hose to a pressure gauge. The connection of the socket to the plug should only occur when the system is not operating, with no pressure or very low pressure of a few bars. The socket and plug are equipped with valves that ensure leak-free connection and disconnection as well as sealing. Their flat surfaces minimize residual oil leakage and air inclusion into the system (leakage approx. 0.1 ml during disconnection, air inclusion approx. 0.02 ml during connection). For proper operation, it is essential to maintain the cleanliness of the valve surfaces. Working pressure: 400 bar. Burst pressure: 1300 bar. Vacuum: up to 0.9 bar. Hydraulic oil flow at Δp = 3 bar: 4.2 [l/min]. Material: galvanized steel. Sealing: NBR. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK BR (reduction) connector socket with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsANFOR lever connector socket with external BSP thread for use in agricultural operations, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBauer lever connector socket with external BSP thread, widely used in agricultural operations, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: carbon steel, galvanized. Sealing: NR/SBR. Working pressure: 20 bar (up to size 89 mm), 12 bar (for sizes above 89 mm). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrari lever connector socket with flange PN10, type F.45, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector socket KLAUDIA finished with a PN10 flange with wide applications: for unloading cement wagons, in needle filter installations IGE (ground dewatering installations), agricultural farms, tank trucks, irrigation systems, industry, and construction. Material: aluminum. Sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.
