Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsKLAUDIA lever connector socket with a "tail" for a hose, widely used for unloading cement wagons, in IGE (drainage) needle filter installations, in agricultural farms, tank trucks, irrigation systems, industry, and construction. Standardly includes a 89 mm seal. Material: aluminum. Sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector socket with external BSP thread, widely used for example: for the transport and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector socket with PN 10/16 flange for wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of sealing material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector socket with external BSP thread, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: AISI 316L steel. Sealing: SBR. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector socket with a turned end for hose with wide applications, including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Sealing: SBR. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDDC dry disconnect connector socket with internal BSP thread made of stainless steel, widely used in road, rail, marine, aviation transport, as well as in the petrochemical, chemical, and pharmaceutical industries. Installed on the hose side (hose part). The socket head is rotatable (360°). Meets all safety, environmental protection, and reliability requirements for the transfer of hazardous, toxic, or expensive fluids. Manufactured according to NATO standard STANAG 3756 (DDC 2", 2.1/2", 3", and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). Connectors comply with ATEX, TDT, ADR, RID, IMDG, pressure directive 97/23/EC. Also has the recommendation of the European Chemical Industry Council CEFIC. Sealing: o-ring (viton), flat gasket (PTFE). Working pressure: 25 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket (hose part) of the dry disconnect coupling DRY-LINK. The couplings feature a unique design that ensures safe and completely leak-free connection of installations (the amount of medium remaining on the valve surface after disconnection is immeasurable). DRY LINK couplings are characterized by: low weight, small dimensions, and compact construction - allowing easy operation in tight spaces, rotating socket connection of the coupling (hose part) - facilitates the alignment of the socket for connection with the plug and prevents hose twisting, ease of handling by trained operators, difficulty of disconnection by unauthorized individuals, high, unobstructed flow through the coupling with low pressure drop - thanks to thin valve discs arranged parallel to the flow, ease of cleaning, smooth internal passage (polished in SANITARY version), few internal parts, no dead spaces - DRY LINK couplings are ideal for high-viscosity fluids and applications requiring a high level of cleanliness (food, pharmaceutical, cosmetic substances, paints, adhesives), DRY LINK couplings can also be used for powders and in the petrochemical industry. Material: AISI 316 steel. Sealing: PTFE, viton, EPDM, or chemraz®. Connections: BSP or NPT. Working pressure: 14.3 bar for DN25 and DN40 couplings, 10.3 bar for DN50 couplings, 8.3 bar for DN80 couplings. Vacuum: up to 0.94 bar. Operating temperature: from -29°C to +110°C (viton, EPDM, chemraz®), from -7°C to +110°C (PTFE).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry-mate shut-off connector socket with internal thread made of polypropylene. Used in the chemical, pharmaceutical, agricultural industries, and handling systems. Not intended for gas media and liquids with a low flash point. Installed on the hose side (hose part). The socket design is based on a ball valve, which ensures completely unobstructed flow. The socket is supplied complete with polypropylene caps. Material: body - glass fiber reinforced polypropylene, ball - PTFE, CAMLOCK latches - AISI 316 steel. Sealing: valve - PTFE, connector - viton (available in EPDM and Kalrez). Working pressure: up to 7 bar. Operating temperature: 21°C (up to 66°C at a working pressure of 5 bar). Maximum leakage: 2 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, heavy glass fabric coated on one side with a thick layer of silicone, with a weight of 3260 g/m². It has high insulation properties and excellent flame and abrasion resistance. Resistant to water, moisture, and hydraulic oils. Used in steelworks, metal and glass foundries - splashes of molten metal and glass do not adhere to the shield. Material: glass fabric coated with silicone. Operating temperature: from -54°C to +260°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery thick protective cover for hoses, hoses, and pipes in the form of a sleeve. Flame-resistant, abrasion-resistant, and oil-resistant. Also used for protecting steam and hot oil installations - protects against burns and energy loss. The application of this cover can reduce the external temperature of the steam hose from +194°C to +54°C. Nominal wall thickness: 5.08 mm. Very good moisture resistance makes it suitable for outdoor use as well. Material: fiberglass coated with blue silicone. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes; up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe angle bracket is intended for mounting to the plate of products from the Line On Line series. Supplied with two M3x16 screws (for LOL 4), two M3x25 screws (for LOL 6 and 8), two M3 nuts, and four washers. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLock preventing unauthorized adjustment of the pressure reducing valve settings or activation of the shut-off valve - for the Syntesi® series.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKey for disassembling the BIT/SY1 tank, SYNTESI system. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKey for use with various RJT hygienic connections. Available in sizes: 1", 1.1/2", 2", 2.1/2", 3" or 4". Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections size 150 and 125. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections size 250 and 205. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections in sizes 65 and 38. Material: ductile iron.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections size D (25). Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTS type assembly key for TW (tank truck) connections. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality pneumatic wrench designed for the assembly and disassembly of vehicle wheels - for service stations, tire shops, automotive workshops. Also used as an assembly tool in steel constructions, machinery, etc. Complies with the requirements outlined in the Machinery Directive 2006/42/EC. The set of socket wrenches in sizes 17, 19, and 21 mm should be treated as a separate assortment. Key features: dual impact mechanism TWIN HAMMER, housing made of composite materials, handle covered with anti-vibration material, low noise level - 83dB(A), three-position torque regulator. Includes EUROSTANDARD DN 7.2 quick coupling plug. Average air consumption: 113 l/min. Working pressure: 6.2 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° ELBOW RADIATOR intended for engine cooling systems in vehicles and automotive-type engines (for water, ethylene glycol-based coolants). Meets the requirements of standard SAE J20 R4 Class D-1. Available with arm lengths of 200, 250, and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the elbow diameter. Operating temperature: from -40°C to +125°C. Safety factor (burst pressure / maximum working pressure) 3:1. coupling material: black EPDM rubber. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow made of stainless steel type 62510 with internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° IBC elbow with internal BSP thread. Material: polypropylene. Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling for joining plastic hoses (for polyurethane hoses, a minimum hardness according to Shore (A) 98° is required). Material: nickel-plated brass. Operating temperature: from -15°C to +130°C. Working pressure: 30 bar. Sealing: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow of FERRARI lever coupling, one side ending with a socket and the other with a plug coupling, type F.25, for use in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90o elbow with internal BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90o elbow with external and internal BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle nipple 90o with external BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 135° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 2 bar to 8.12 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 split flange with holes for DIN 912 hexagon socket screws; lightweight version. Allows for easy installation of flange adapters or hoses (pipes) with flange ends. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting flange for pneumatic actuator, for attachment to the rear or front cover of the actuator. Allows for permanent mounting of the actuator in machines and devices. Range of actuator diameters: 32 mm ÷ 125 mm. Included: 4 mounting screws. Material: galvanized carbon steel (flange, screws, and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting collar for pneumatic actuator, for attachment to the rear or front cover of the actuator. Allows for permanent mounting of the actuator in machines and devices. Actuator size: Ø8 ÷ Ø25. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull SAE 6000 flange with four holes for DIN 912 hexagon socket screws; heavy version. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFixed flange PN16 type CNWF made of carbon steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps or clamp bands. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to the standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and solid assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 321 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMade of deformation-resistant aluminum, this lightweight and handy air and nitrogen tire inflator in PREMIUM version – calibrated (* - STANDARD version without calibration); re-calibration after two years (directive 86/217/EEC). Suitable for all standard VG 8 tire valves (passenger cars, motorcycles, bicycles, etc.). Equipped with a shock-resistant analog pressure gauge 63 mm, accuracy class - 1.0 according to DIN EN 12645 (for STANDARD model without calibration – 1.6), in a rubber protective cover with a dual measurement scale (bar, psi). Tire filling occurs by fully pressing the lever, releasing air by pressing the lever halfway. A rubber hose 500 mm long with a swivel coupling to the inflator is used for connecting to the tire. Depending on the version, the hose is terminated with one of three types of fittings: lever, clamp, or double-sided plug (ideal for twin wheels). A good solution for automotive workshops and service stations. **_Replacing the pressure gauge voids the calibration feature of the inflator and requires a new calibration!_** Material of the inflator: aluminum (body, lever). Sealing: NBR, PU. Working pressure: 10 bar. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple, universal, one-piece ball valve for industrial applications. Body made of hexagonal brass rod, nickel-plated, with black painted aluminum lever. Chrome-plated brass ball seated in PTFE seats. Brass stem with NBR o-ring seals, featuring blow-out protection. The MINI valve can be used for air, neutral gases, water, chemicals, petrochemical products, etc., free from solid contaminants, compliant with the chemical resistance of the valve materials. Meets the requirements of the Pressure Equipment Directive PED 2014/68/EU, regarding good engineering practice (SEP), according to Article 4, paragraph 3 (without CE marking). Compliant with the RoHS 2011/65/EU material directive and REACH regulation 1907/2006. The specified minimum operating temperature applies to the valve emptied of freezing liquid. Kv - flow coefficient of the valve expressed in metric units (water flow in m³ per hour at a pressure drop of 1 bar). Body material: nickel-plated brass. Ball material: chrome-plated brass. Stem material: brass. Lever material: aluminum. Ball seal: PTFE. Stem seal: 2 x NBR o-ring. Connection: BSP thread (ISO 228-1). Operating temperature: from -10°C to +90°C.
