Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHANSEN quick coupling plug type HK with internal BSP or NPT thread. Compliant with ISO 7241-1 B standard. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Material: brass. Sealing: NBR (operating temperature from -40°C to +121°C), EPDM (operating temperature from -54°C to +149°C), EPDM236 (for use with steam at temperatures above +149°C). Working pressure: up to 207 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull-flow quick coupling plug Nitto Kohki series TSP CUPLA with external BSPT thread, featuring excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Particularly recommended for high-viscosity fluids such as lubricants. Material: carbon steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN10.4 quick coupling plug with hose end. Versatile use in the industry, mainly in pneumatic installations. Manufactured according to Eurostandard DN10. Working pressure: 16 bar. Material: hardened galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN10.4 quick coupling plug with external BSPT, NPT thread or internal BSP, NPT thread. Versatile use in the industry, mainly in pneumatic installations. Manufactured according to Eurostandard DN10. Working pressure: 16 bar. Material: hardened galvanized steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug CEJN DN5.3 with external BSPT, NPT or internal BSP, NPT thread. Versatile use in the industry, mainly in pneumatic installations. Working pressure: 16 bar. Material: hardened steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN5.3 quick coupling plug with hose end. Versatile use in the industry, mainly in pneumatic installations. Working pressure: 16 bar. Material: hardened steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug CEJN DN7.6 with external thread BSPT, BSP, NPT or with internal thread BSP, NPT. Versatile use in the industry, mainly in pneumatic installations. Manufactured according to Eurostandard 7.2. Working pressure: 16 bar. Material: hardened galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN7.6 quick coupling plug with hose end. Versatile use in the industry, mainly in pneumatic installations. Manufactured according to Eurostandard 7.2. Working pressure: 16 bar. Material: hardened galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect plug for measurement SNAP-CHECK, manufactured in Sweden, designed for pressure measurement in hydraulic systems. The quick-connect sockets are connected by a hose to a pressure gauge, while the hardened steel quick-connect plugs are typically permanently installed in the hydraulic system and equipped with shut-off valves. Connection of the socket to the plug is possible under pressure up to 300 bar. The working pressure for the unplugged plug is 600 bar, and the minimum burst pressure is 2400 bar. The working pressure for the connected socket and plug is also 600 bar, while the minimum burst pressure is 1300 bar. The precise construction of the quick-connects ensures the tightness and reliability of the measurement points in the hydraulic system. The connection range for measurement plugs allows for easy configuration of the connection. Quick-connect plugs are supplied as standard with red plastic caps. Working pressure: 600 bar. Switching pressure: up to 300 bar. Body material: galvanized steel. Sealing: NBR. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQC6 quick coupling plug compliant with Standard Instrumentation, with LET-LOK® connection. QC6 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for tightness. Interchangeable with Instrumentation standard quick couplings from other manufacturers. The plug is available in versions without and with a valve. Material: AISI 316 steel. Working pressure: 103 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSNAP-TITE quick coupling plug with internal BSP and NPTF threads, manufactured in the USA, features a unique valve design that allows for laminar flows. Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 448 bar (depending on the size of the quick coupling), safety factor 2:1. Material: carbon steel, galvanized. Sealing: NBR (operating temperature: from -35°C to +120°C), viton (operating temperature: from -26°C to +204°C). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SNAP-TITE quick-connect plug with internal BSP thread, manufactured in the USA, features a unique valve design that allows for laminar flows. Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 155 bar (depending on the size of the quick coupling), safety factor 2:1. Material: brass. Sealing: NBR (operating temperature: from -35°C to +120°C), viton (operating temperature: from -26°C to +204°C). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with internal BSP thread, knurled, intended for cold and hot water. Material: brass. Working pressure: 16 bar. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki series SP CUPLA type A plug with shut-off valve, featuring internal BSPT thread, excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Material: chrome-plated steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external threaded plug with a key flat, intended for cold and hot water. Material: brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki series SP CUPLA type A shut-off valve plug with external BSPT thread, featuring excellent durability, intended for water, hydraulic oils, steam, chemicals, air, and gases. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2"). Operating temperature: from -20°C to +180°C (viton).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with external NPT thread, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and securing sleeve, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: UV polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with external NPT thread, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick-connect plug with external NPT thread intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick-connect plug with external NPT thread intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick-connect plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with free flow series 25 DN 7.8 with external BSP thread, characterized by very high flow rate. Application: all fields of modern technology, industry, craftsmanship - for compressed air, liquids, and gases. Performance: 1800 l/min, Pe=6 bar, Δp=0.5 bar, air. Working pressure: 35 bar. Material: AISI 316Ti and AISI 303 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with a popular Eurostandard DN7.2 profile without a valve, with external or internal BSP thread, intended for compressed air, gases, liquids of low and medium viscosity. The plugs are interchangeable with all Eurostandard DN7.2 ÷ 7.8 from other manufacturers. Working pressure: up to 25 bar. Material: nickel-plated steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with shut-off valve for diagnostic quick coupling, with internal NPT thread, used for pressure measurement in hydraulic systems. Manufactured according to ISO 15171-1 and SAE J1502 standards, interchangeable with connectors from other manufacturers. Quick coupling plugs made of hardened steel are typically permanently installed in the hydraulic system, while the quick coupling sockets remain connected by a hose to the pressure gauge. The connection of the socket to the plug should only occur when the system is not operating, with no pressure or very low pressure of a few bars. The working pressure for the plug not connected to the socket is 400 bar, and the minimum burst pressure is 1600 bar. The working pressure for the connected socket and plug is also 400 bar, while the minimum burst pressure is 1300 bar. The socket and plug are equipped with valves that ensure leak-free connection and disconnection as well as sealing. Their flat surfaces minimize residual oil leakage and air inclusion into the system (leakage approx. 0.1 ml during disconnection, air inclusion approx. 0.02 ml during connection). For proper operation, it is essential to maintain the cleanliness of the valve surfaces. Working pressure: 400 bar. Burst pressure: 1300 bar. Vacuum: up to 0.9 bar. Hydraulic oil flow at Δp = 3 bar: 4.2 [l/min]. Material: galvanized steel. Sealing: NBR. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with shut-off valve for diagnostic quick coupling, with external NPT thread, used for pressure measurement in hydraulic power systems. Manufactured according to ISO 15171-1 and SAE J1502 standards, interchangeable with couplings from other manufacturers. Quick coupling plugs made of hardened steel are typically permanently installed in the hydraulic system, while the quick coupling sockets remain connected via a hose to the pressure gauge. The connection of the socket to the plug should only occur when the system is not operating, with no pressure or very low pressure of a few bars. The working pressure for the disconnected plug is 400 bar, and the minimum burst pressure is 1600 bar. The working pressure for the connected socket and plug is also 400 bar, while the minimum burst pressure is 1300 bar. The socket and plug are equipped with valves that ensure leak-free connection and disconnection as well as sealing. Their flat surfaces minimize residual oil leakage and air inclusion into the system (leakage approx. 0.1 ml during disconnection, air inclusion approx. 0.02 ml during connection). For proper operation, it is essential to maintain the cleanliness of the valve surfaces. Working pressure: 400 bar. Burst pressure: 1300 bar. Vacuum: up to 0.9 bar. Hydraulic oil flow at Δp = 3 bar: 4.2 [l/min]. Material: galvanized steel. Sealing: NBR. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal quick coupling plug with free flow of large diameter with external BSP thread, primarily intended for compressed air. Performance: 12000 l/min at inlet pressure Pe=6 bar, Δp=0.5 bar, air. Material: hardened, galvanized steel. Working pressure: 20 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsANFOR lever connector plug with external BSP thread for use in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on the size of the connector). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsANFOR lever connector with flange PN 10 for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on the size of the connector). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBauer lever connector plug with external BSP thread, widely used in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Working pressure: 20 bar (up to size 89 mm), 12 bar (for sizes above 89 mm). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBauer lever connector plug with PN 10 flange, widely used in agricultural operations, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: carbon steel, galvanized. Working pressure: 20 bar (up to size 89 mm), 12 bar (for sizes above 89 mm). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector plug KLAUDIA finished with a PN10 flange with wide applications: for unloading cement wagons, in needle filter installations IGE (ground dewatering installations), agricultural farms, tank trucks, irrigation systems, industry, and construction. Material: aluminum. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with PN 10/16 flange for wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of gasket material. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with "tail" for hose with wide applications, e.g.: for the transfer and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with a weldable connection for wide applications, e.g.: for the transport and unloading of bulk materials (grains, flour, feed, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector plug with a flared end for hose, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: AISI 316L steel. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector (tank part) of the dry disconnect coupling DRY-LINK. The couplings feature a unique design that ensures safe and completely leak-free connection of installations (the amount of medium remaining on the valve surface after disconnection is immeasurable). DRY LINK couplings are characterized by: low weight, small dimensions, and compact construction - allowing easy operation in tight spaces, ease of handling by trained operators, difficulty of disconnection by unauthorized individuals, high, unobstructed flow through the coupling with low pressure drop – thanks to thin valve discs arranged parallel to the flow, ease of cleaning, smooth internal passage, few internal parts, absence of dead spaces – DRY LINK couplings are ideal for high-viscosity fluids and applications requiring a high level of cleanliness (food, pharmaceutical, cosmetic substances, paints, adhesives), DRY LINK couplings can also be used for powders and in the petrochemical industry. Material: AISI 316 steel. Sealing: PTFE, viton, EPDM, or chemraz®. Connections: BSP or NPT. Working pressure: 14.3 bar for DN25 and DN40 couplings, 10.3 bar for DN50 couplings, 8.3 bar for DN80 couplings. Vacuum: up to 0.94 bar. Operating temperature: from -29°C to +110°C (viton, EPDM, chemraz®), from -7°C to +110°C (PTFE).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry-mate disconnect connector plug with internal thread made of polypropylene. Used in the chemical, pharmaceutical, agriculture, and handling systems industries. Not intended for gas media and liquids with a low flash point. Installed on the pressure side (tank side). The plug design is based on a ball valve, which ensures completely unobstructed flow. The plug is supplied with polypropylene caps. Material: body - glass fiber reinforced polypropylene, ball - PTFE, CAMLOCK latches - AISI 316 steel. Sealing: valve - PTFE. Working pressure: up to 7 bar. Operating temperature: 21°C (up to 66°C at a working pressure of 5 bar). Maximum leakage: 2 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak detector FW-1661 in spray form. Non-corrosive, non-flammable. FW-1661 is designed for detecting leaks in pipe joints, heat exchangers, sleeves, valves, etc. It quickly detects leaks in gas lines, compressed air, and other gases. Suitable for pipes made of steel, copper, and plastics. After application, FW-1661 forms an active film that indicates the leak location through rising bubbles. FW-1661 contains special ingredients that allow the detector to be used on vertical surfaces and piping systems. It is also suitable for exhaust pipes. Operating temperature range: from -15°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic, resistant to kinks hose designed for hydraulic oil, water-based fluids, and other media. Used in measurement systems, control systems, and hydraulic brake systems in bicycles. On special order, the outer layer is micro-perforated. Inner layer: polyester. Reinforcement: single aramid braid. Outer layer: black polyurethane. Working pressure: 625 bar or 660 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfessional, one-piece ball shut-off valve of European production, with a body made of brass casting, featuring a straight plastic lever (with a replaceable label in colors: standard red; available yellow, blue, green, white), intended for industrial installations. It can be used for air, neutral gases, water, chemicals, petrochemical products, etc., free from solid contaminants, compliant with the chemical resistance of the valve materials. It has a stem blow-out protection. Meets the requirements of the Pressure Equipment Directive PED 2014/68/EU, regarding good engineering practice (SEP), in accordance with Article 4, paragraph 3. Compliant with the RoHS material directive 2011/65/EU and REACH regulation 1907/2006, does not contain silicones. Available versions of these valves with stem sealing made of Viton: PTFE / FKM (valve working temperature: -15°C to +130°C) and on special order versions PTFE / EPDM (-40°C to +130°C) and PTFE / HNBR (-30°C to +130°C). The working pressure of these versions depends on the working temperature. The stated minimum working temperature applies to the valve emptied of freezing liquid. Can operate under vacuum: -0.99 bar. Q – air flow at an inlet pressure of 6 bar and pressure drop Δp=1 bar, expressed in liters at atmospheric pressure [Nl]; Kv - flow coefficient of the valve expressed in metric units (water flow in m³ per hour at pressure drop Δp=1 bar). Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: polyamide (PA 66). Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP thread (ISO 228-1) / BSP and BSPT thread (ISO 7-1). Working temperature: from -20°C to +80°C.
