Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality PVC hose intended for water. Can be used for the transmission of drinking water (short-term contact with drinking water) – has been issued a compliance certificate in the Czech Republic according to the requirements of 409/2005 Sb for this application (contact Tubes International). For use in industry, agriculture, horticulture, and domestic applications. Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure at 20°C: from 10 bar to 17 bar - depending on the diameter of the hose. Operating temperature: from -5°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe UPS crimping press is designed for crimping textile-reinforced hoses with EC-type ferrules using a manual lever. It is standardly equipped with two sets (6 crimping segments each) of jaws. The working range for the internal diameter of crimped hoses for the UPS-1 press: DN 3 ÷ 8 (internal diameter range of EC ferrules: 8 ÷ 17 mm), DN 10 ÷ 16 (internal diameter range of EC ferrules: 18 ÷ 28 mm). The working range for the internal diameter of crimped hoses for the UPS-2 press: DN 20 (internal diameter range of EC ferrules: 30 ÷ 34 mm), DN 25 (internal diameter range of EC ferrules: 32 ÷ 38 mm). An additional base with the index EC-100250 can be purchased for the press.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand crimper TNT250/P (six-jaw crimping) with manual hydraulic pump MPT100. The crimper head allows for passing through the hose, which is important when crimping angled fittings. The set includes: 6 sets of jaws for standard hoses and those with reduced outer diameter, grease, plastic caliper, case. The specified crimping force at 700 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand crimping tool TNT8 (eight-jaw crimp) with manual hydraulic pump. The crimping head allows it to be passed through the hose, which is important for crimping angled fittings. The set includes: 6 sets of jaws for standard hoses and reduced outer diameter hoses 5/16", 5/16" ÷ 13/32", 1/2", 13/32", 1/2" ÷ 5/8", and 5/8", carrying case. The specified crimping force at 200 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Giant system strap clamps. Heavy-duty clamps (for hoses with large diameters - over 150 mm). Clamps with so-called "noses" secure the end of the strap after bending. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for CEJN quick coupling sockets series 115, 116, 117, and 125, protecting against contamination and damage. Material: PVC. Available in colors: red, black, or blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for GROMELLE series H-5000 quick-connect socket, protecting connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDust-proof plug for ISO-B quick coupling socket protecting connections from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC. Color red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for a quick-connect socket with a chain, series W-6000, protecting against contamination and damage. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for a quick-connect socket, type WSC, protecting against contamination and damage. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDustproof plug for TEMA quick coupling socket protecting the connection from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling socket HQ series HPA. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling socket with chain to protect against contamination and damage. Material: chrome-plated brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for ANFOR lever connector. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for LAUX 42 lever connector. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket plug (cap) SKV, as a closing element, for use in hydraulic systems. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNOR blind cap with chain intended for symmetrical connections of the STORZ type designed according to the Norwegian national standard. Material: bronze. Sealing: NBR. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS blind plug (cap) with external UNF thread, type ROV. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind cover for quick coupling (for socket and plug) protecting against dirt and mechanical damage, for series 1100 and 1100N. The use of covers increases the lifespan of the quick coupling. Material: high-strength PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind cap cover for quick couplings (for socket and plug) protecting against dirt and mechanical damage, for series 1300 and 1300N. The use of caps (covers) increases the lifespan of the quick coupling. Material: high-strength PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind cover for quick coupling socket and plug, protecting against dirt and mechanical damage, for series 1800 and 1800N. The use of covers increases the lifespan of the quick coupling. Material: high-strength PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass cap for nut. Range of external diameters of pipes from 4 to 22 mm. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ blind cap, equipped with a drain valve without a chain, intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. With a symmetrical design of the connection part, it easily connects with each other. Elements with the same coupling spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal plug with external NPT thread, type 108H, for threaded couplings intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDustproof plug for TEMA quick coupling socket protecting the connection from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd cap for the socket or plug of a screw quick coupling, type PVV3, protecting the connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: polypropylene. Color: red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 plug Eaton Walterscheid™, type VKA: 24° cone DIN 2353 with NBR o-ring. Compatible with nut DIN 2353 type M. Available as: LL (very light series), L (light series), S (heavy series). Material: carbon steel, with Guardian Seal™ galvanic coating.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap (plug) with locking nut SKV, as a closing element, for use in hydraulic systems. Material: galvanized steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for STECKO system socket. Material: automatic steel, galvanized. Sealing: NBR (o-ring), Teflon (backup ring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for CEJN quick coupling series 115, 116, 117, and 125, protecting against contamination and damage. Material: PVC. Available in colors: red, black, or blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling connector PD, standard ISO 15171-1. Material: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling water NiTO 1". Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling coupling GROMELLE series H-5000, protecting connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for ISO-A quick coupling coupling protecting the connection from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC. Color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDust-proof plug for ISO-B quick coupling connector protecting the connections from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC. Color red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for a quick-connect coupling with a chain, series W-6000, protecting against contamination and damage. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for a quick-connect coupling, type WSC, protecting against contamination and damage. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for a quick-connect coupling with a chain, type TC, protecting against contamination and damage. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDustproof plug of the TEMA quick coupling connector protecting the connection from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for quick coupling HQ series HPA. Material: carbon steel, galvanized.
