Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat nut for JIC37° bulkhead fittings. Material: carbon steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection plate designed for connecting hydraulic hoses with a plate valve (distributor). The connections are located at the bottom of the plate. Material: steel. Maximum working pressure: 315 bar. Operating temperature: from -20°C to +80°C (medium), from -20°C to +50°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plate intended for sealing channels A, B, P, and T of the NG10 plate connection. Material: steel. Sealing: NBR. Maximum working pressure: 315 bar. Operating temperature: from -20°C to +80°C (medium), from -20°C to +50°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd plate designed to seal channels A, B, P, and T of the NG6 plate connection. Material: steel. Sealing: NBR. Maximum working pressure: 315 bar. Operating temperature: from -20°C to +80°C (medium), from -20°C to +50°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCorner lower plate for mounting DIN 3015 standard clamp type 100/101. For size group 0, there is one hole for a screw. For size group 1 to 6, there are two holes for screws. Material: carbon steel, galvanized or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBottom bridge plate for welding for the installation of DIN 3015 standard clamp type 100/101. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bottom plate for welding for the installation of heavy DIN 3015 type 201 clamp. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultiple lower plate for welding for mounting DIN 3015 double clamp type 301. Number of clamps: 5. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble upper plate for mounting heavy DIN 3015 clamp type 201. Material: carbon steel, galvanized or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUpper protective plate for mounting heavy-duty DIN 3015 clamp type 201. Material: carbon steel, galvanized or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUpper protective plate for mounting double DIN 3015 clamp type 301. Material: carbon steel, galvanized or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCopper washer for use in high-pressure installations (for quick couplings, adapters with external threads). Working pressure: up to 2000 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), type B25B1, with external gearing, intended for use in hydraulic systems of machines and equipment. Material: body – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Liquid viscosity: from 12 cSt to 800 cSt (recommended from 17 to 65).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), type P38P2, with external gearing, intended for use in hydraulic systems of machines and equipment. Material: housing and mounting plate – aluminum, rear cover – cast iron. Sealing: NBR. Liquid viscosity: from 12 cSt to 800 cSt (recommended from 17 to 65).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: housing and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: left. The stated maximum working pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: housing – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: left. The stated maximum working pressure applies to continuous operation. Material: body – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: right. The specified maximum working pressure applies to continuous operation. Material: body – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: right. The specified maximum working pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLevel gauge designed for monitoring hydraulic oil levels, mounted on the side wall of the tank. It is equipped with a float that rises to the surface of the oil. It signals the minimum liquid level in the tank (lower position of the float). Oil enters the level gauge through openings in BANJO type mounting screws. Material: polyamide (body), aluminum (housing), polymethyl methacrylate (inspection hole). Maximum operating pressure: 2 bar. Electrical signal: maximum 48V AC/DC and 0.5 A. Protection class: IP 65. Operating temperature: from +5°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 backing flange with internal thread for connection to flange fitting, without mounting screws and sealing. Material: AISI 316L steel. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 backing flange with internal thread for connection to flange fitting, without mounting screws and sealing. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 backing flange with socket for welding to connect with flange fitting, without mounting screws and sealing. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure switch used in hydraulic power systems. Signals the achievement of a specified oil pressure value. The regulated value is adjusted using a knob. Installation is possible using a thread or plate connection. Material: aluminum (housing). Sealing: NBR. Pressure adjustment range: 2 ÷ 400 bar. Maximum load: 5 A at 250V AC; 0.25 A at 125V DC. Protection degree: IP 65. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe VSF valve supplies hydraulic oil from the connection P1 or P2 to the connection U. The power source is the connection with higher oil pressure (the second connection P1 or P2 is automatically blocked using a movable ball). The valves are equipped with mounting holes. Material: galvanized steel (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong, and flexible multi-braided hose, primarily used for high-pressure water cleaning and cutting, hydroforming, hydraulics, chemical injection, and high-pressure lubrication. The hose is pressure tested and supplied with the appropriate certificate. It meets the EN 1829-2 standard. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material of the end fitting and sleeve: stainless steel (end fitting), carbon steel, galvanized (sleeve). Working pressure: 3035 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, the strongest and flexible, eight-braid hose, mainly used for high-pressure water cutting, hydroforming, and laboratory applications. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material of the end fitting and sleeve: stainless steel (end fitting), carbon steel, galvanized (sleeve). Working pressure: 3200 bar. Operating temperature: from -30°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlanged connection 90° with a compact design, featuring a flange with a pitch diameter of holes from 30 mm to 55 mm, with internal BSP connection thread. Used in hydraulic pump connections. Standardly equipped with a set of screws, washers, and an O-ring. Material: aluminum. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlanged connection 90° SAE 3000 with a compact design featuring a 24° DIN 2353 socket for metric tubing, intended for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Available as: L (light series), S (heavy series). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlanged connection 90° SAE 3000 with a compact design and internal BSP thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° SAE 3000 flange connection with a compact design and external BSP thread for use in hydraulic systems. Supplied with mounting screws and an o-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° SAE 3000 flange connection with a compact design and socket for welding, intended for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° SAE 6000 flange connection with a compact design and socket for welding, intended for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange connection with a compact design and socket for welding, intended for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange connection with a compact design and socket for welding, intended for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange connection with a compact design and external BSP thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange connection with a compact design and socket for welding, intended for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
