Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape, made of AISI 201 steel. Standard is the basic clamping system using roll tape, formed into bands on hoses of any diameter (a double loop of tape is recommended). Separate clips with "noses" must be purchased to secure the end of the tape after bending. Installation using tools BD-C07599, BD-C00189, BDC00399. Length: 30.5 m.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard tape, made of AISI 304 steel. Standard is the basic clamping system using tape in rolls, formed into bands on hoses of any diameter (a double loop of tape is recommended). Separate clips with "noses" must be purchased to secure the end of the tape after bending. Installation using tools BD-C07599, BD-C00189, BD-C00399. Length: 30.5 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape, made of AISI 316 steel. Standard is the basic clamping system using roll tape, formed into bands on hoses of any diameter (a double loop of tape is recommended). Separate clips with "ears" must be purchased to secure the end of the tape after bending. Installation using tools BD-C07599, BD-C00189, BD-C00399. Length: 30.5 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for mounting steel bands of the Band-It® system with a built-in knife for cutting excess band and a spring-loaded grip for improved handling. Allowed band width: 1/4" ÷ 3/4". Maximum band thickness: 0.76 mm. Application: Band-It® Standard and Band-It® Junior - in this case, the use of adapter BD-J00199 is necessary.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-closing band in full epoxy coating (increased corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Junior tape is a clamping system that uses pre-formed tape sections shaped into double-loop bands with an integrated fastener. The smooth surface of the tape and its proper installation on a non-corrugated hose create a leak-proof attachment at the end of the clamp. Installation is done using the BD-C00189 tool with the pre-forming adapter BD-J00199. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble loop band with built-in Band-It® Ultra-Lok® fastener made of AISI 201 steel designed for the most demanding applications. The double loop increases the strength of the clamp. The smooth surface of the band and its proper installation on a non-corrugated hose create a tight fitting of the end, preventing leaks into the clamp. Installation using electric tools BD-UL9010 or BD-UL4000B. For mounting 1/2" clamps to the mounting device, a BD-M09387 adjustment washer should be used. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 316 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting tape for information plates of the Band-It® Tie-Lok® system, made of AISI 304 steel. Durable, secure, with a low-profile lock and smooth inner surface. Tape width: 1/4". Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting tape for information plates of the Band-It® Tie-Lok® system, made of AISI 304 steel. Durable, safe, with a low-profile lock and a smooth inner surface. Tape width: 1/4". Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Ultra-Lok® system tape fasteners. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIdentification label for the Band-It® Tie-Lok® identification system for self-labeling hoses available in three dimensions: 51x19, 63.5x38, and 89x19. Material: AISI 304 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-coated self-locking strap designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-coated self-locking strap designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Junior system adapter. Allows for the installation of Band-It® Junior system bands using the tool BD-C00189. Allowed tape width: 1/4" - 3/4".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTensioning and cutting device for Band-It® Tie-Lok® informational label tapes. Tape width: 1/4". Maximum tensioning force: 130 kG.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for mounting steel bands of the Band-It® system with a built-in knife for cutting excess band. It features a compact design and low weight. The metal surfaces of the tool are galvanized. Due to its compact dimensions, it can be used in areas with restricted access; it is characterized by ease of loading and unloading the band. The tool can be used in three different positions – depending on access and for the operator's convenience: straight, angled, and pistol grip – in the latter, the band can be tensioned with one hand (the other positions require the use of both hands). Allowed band width: 1/4" ÷ 3/4". Maximum band thickness: 0.63 mm. Application: Band-It® Standard.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting device for Band-It® system bands. Allowed tape width: 3/16" - 3/4". Application: Band-It® Standard. Used when greater clamping force is required (heavy duty).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIdentification label for the Band-It® Tie-Lok® identification system for self-labeling hoses available in three dimensions: 51x19, 63.5x38, and 89x19. Material: AISI 316 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-locking band partially coated with epoxy (increases corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Giant tape, made of AISI 201 steel. The standard is a basic clamping system using roll tape, formed into bands on hoses of any diameter (a double loop of tape is recommended). Separate clips with "noses" must be purchased to secure the end of the tape after bending. The GIANT version is intended for heavy-duty applications (for hoses with large diameters - above 150 mm). Installation using tool BD-G40299. Length: 30.5 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe Band-It® Junior tape is a clamping system that uses tape in pre-formed sections shaped into double-loop bands with an integrated fastener. The smooth surface of the tape and its proper installation on a non-corrugated hose create a tight attachment of the end, preventing leaks into the clamp. Installation is done using the BD-C00189 tool with the pre-forming adapter BD-J00199. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe tape in sections for the Band-It® Ultra-Lok® system made of AISI 201 steel is intended for the most demanding applications. The double loop increases the strength of the clamp. The smooth surface of the tape and its proper installation on a non-corrugated hose create a tight fitting of the end, preventing leaks into the clamp. Installation using electric tools BD-UL9010 or BD-UL4000B. For mounting 1/2" clamps to the mounting device, a spacer BD-M09387 should be used. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Giant system strap clamps. Heavy-duty clamps (for hoses with large diameters - over 150 mm). Clamps with so-called "noses" secure the end of the strap after bending. Material: AISI 201 steel.
