Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose designed for the transfer of liquid products from the petrochemical industry containing up to 50% aromatic hydrocarbons, fuels, gasoline, diesel, heating oil, lubricating oils, etc. The inner layer is made of black, smooth, antistatic (dissipating electric charges 10^4 Ω < R < 10^9 Ω) NBR rubber. Reinforcement with synthetic cord and steel spirals. The outer layer is made of black NBR rubber, resistant to oil and weather conditions. Relatively low weight and flexible hose construction make it easy to handle, characterized by a wide, universal application for fuel transfer or other compatible media in typical working conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spirals. Outer layer: black NBR rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong RIG STAR D discharge hose and RIG STAR SD suction-discharge hose are designed for the transfer and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). It can also be used for cement, barite, seawater, and brine. The inner layer is made of black, smooth, antistatic NBR rubber. It features a copper wire ensuring electrical continuity between the hose ends. The outer layer is made of CR chloroprene rubber, flame-retardant, resistant to abrasion, ozone, seawater, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms. It can also be successfully used in land applications. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: 20 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of fuels and liquid products from the petrochemical industry, containing up to 50% aromatic compounds, including gasoline, diesel fuel, and mineral oil. It can be used for tankers, storage tanks, loading stations, and industrial equipment. The hose is widely used in industry and transport under standard working conditions. The inner layer is made of smooth, black, antistatic (R <106 Ω/m) NBR rubber. Reinforcement with synthetic cord and steel spiral. It has two copper wires ensuring electrical continuity between the hose ends – provided there is a proper connection to the ends. The outer layer is made of black SBR/NBR rubber, antistatic (R <106 Ω/m), resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NBR rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C (up to +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose designed for the transfer of liquid petrochemical products containing up to 30% aromatic compounds (excluding ester-based products). The outer layer is flame-retardant, manufactured according to ASTM C 542 standards, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, two steel spirals. Outer layer: black CR rubber. Working pressure: 5 bar. Vacuum: 0.5 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction and discharge hose for low-pressure parts of hydraulic systems, based on the requirements of standard SAE J517 100 R4. Used primarily as a suction and return oil hose. Designed mainly for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids and water with a temperature limit of +70°C. Suitable for the transfer of various liquid products from the petrochemical industry with low aromatic compound content. Not recommended for gasoline, diesel fuel, and oils based on phosphate esters. The inner layer is made of black, smooth, oil-resistant synthetic rubber. The reinforcement consists of synthetic cord layers and a steel spiral providing high resistance to vacuum and very good flexibility of the hose without kinking. The outer layer is made of black synthetic rubber, resistant to abrasion, weather conditions, and light oil exposure. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for unleaded gasoline, diesel oil, and liquid fuels containing up to 50% aromatic compounds. Used in industry and transportation for the transfer and handling of petrochemical products, in tank trucks, at road and rail loading and unloading terminals for fuels. Inner layer made of black, smooth, antistatic (R ≤ 10^6 Ω) NBR rubber (NBR1). Reinforced with layers of high-strength cord and a steel spiral. Equipped with two copper wires ensuring electrical continuity between the hose ends, provided they are properly connected to the fittings. Outer layer made of black, antistatic (R ≤ 10^6 Ω) synthetic rubber, self-extinguishing, resistant to abrasion, oil, ozone, and weather conditions. Through-wall resistance of the hose R ≤ 10^9 Ω (type M/T). Compliant with standards EN12115:11 (16 bar), EN 1761 (10 bar), ISO 2929 (10 bar), TRbF. Certified for explosion hazard zones Ex (ATEX). Excellent resistance to petrochemical products, strong construction, and antistatic properties of both inner and outer layers, built-in antistatic wires, recommend this hose for demanding applications, including in explosion hazard zones. In any case, however, use in explosion hazard zones (ATEX) should be preceded by a risk analysis conducted by a specialist. A version without wire (type Ω/T) is available upon special request. Inner layer: black, smooth NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +90°C (temporarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and flexible, abrasion-resistant suction and discharge hose designed for the pressurized transfer of oils and fuels. A special blend of PVC, PU, and NBR provides high resistance to diesel fuel, biodiesel, and blue oil (fuel used in maritime shipping). Reinforcement with a galvanized steel wire spiral embedded in the inner PVC layer ensures good resistance to vacuum and hose collapse. The smooth inner layer reduces flow losses. Thanks to the braided reinforcement, the hose has high working pressure and low deformation under pressure. Used in the distribution, refueling, and transshipment of oils and fuels, e.g., in tank trucks for heating oil refueling in domestic heating systems. Hoses with diameters of 76 ÷ 102 mm have an external polyurethane layer (significantly increasing abrasion resistance) and a copper antistatic wire. Inner layer: black PVC / PU / NBR. Reinforcement: steel spiral, polyester braid. Outer layer: black PVC / PU / NBR (diameters 19 mm ÷ 63 mm); black PU (diameters 76 mm and above). Operating temperature: from -25°C to +60°C (working pressure dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, suction and discharge hose designed for the transfer of liquid products in the petrochemical industry, containing up to 50% aromatic compounds. The inner layer is antistatic R<106Ω. It features a copper wire ensuring electrical continuity between the hose ends and the dissipation of electrostatic charges. Excellent for transfer systems and, due to the external corrugation, suitable for applications requiring a small bending radius. The outer layer is resistant to abrasion, mineral oils, ozone, aging, weather conditions, and temporary contact with hydrocarbons. Used for fuel tankers and special vehicles for sewer cleaning. Inner layer: black NBR rubber. Reinforcement: synthetic braid, steel spirals. Outer layer: black synthetic rubber. Working pressure: from 10 bar to 16 bar - depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +80°C (temporarily up to +120°C depending on the type of medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose with extreme flexibility designed for the transfer of liquid products in the petrochemical industry, containing up to 60% aromatic compounds. Suitable for use in tank trucks for transporting diesel fuel, ethanol, gasoline, and oils. Inner layer made of black, smooth Chemigum® rubber (NBR, oil resistance: RMA class A). Reinforcement with synthetic cord and two steel wire spirals. Outer layer, deeply corrugated, made of black synthetic Chemivic® rubber (NBR/PVC), resistant to petrochemical substances, oils, and greases, and abrasion. Features a copper wire ensuring electrical continuity between the hose ends – provided it is properly connected to the fittings. Due to the external corrugation, the hose is extremely flexible, requiring minimal force to bend. Its minimum bending radius is equal to the inner diameter of the hose. The external corrugation also reduces the drag resistance of the hose on the ground, and the lightweight construction facilitates hose handling. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spirals. Outer layer: black synthetic Chemivic® rubber. Working pressure: from 10 bar to 17 bar - depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose designed for the transfer of liquid products in the petrochemical industry. It can be used for diesel fuel and gasoline. The standard CARACAS version is recommended for fuels with up to 30% aromatic hydrocarbons, while the CARACAS 50 version is suitable for more aggressive fuels (up to 50% aromatic compounds). It features a copper wire ensuring electrical continuity between the hose ends. Excellent for transfer systems. The outer layer is resistant to abrasion, oil, ozone, and weather conditions, and due to its corrugation, the hose is very flexible and elastic – its minimum bending radius is only 2.5 times the inner diameter. It is also lightweight and easy to handle. Ideal for transfer systems, fuel tankers in moderately harsh external working conditions. Inner layer: black synthetic rubber. Reinforcement: synthetic braid, steel spirals. Outer layer: black synthetic rubber. Working pressure: 6 bar. Vacuum: 0.6 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, highly flexible hose for the transmission of gasoline and diesel fuel, fire-resistant, for small vessels - recreational boats up to 24 m in length. Hose with a working pressure of 10 bar, produced using a core method. Designed for fuel installations of stationary engines on ships, motorboats, yachts, etc. Suitable for unleaded gasoline, gasoline with up to 10% ethanol (E10 gasoline), diesel fuel, and diesel fuel with 10% FAME esters (B10 - biodiesel). Compliant with ISO 7840 type A1 (fire-resistant, fuel vapor permeability less than or equal to 100 g/m²/24 h), compliant with directive 94/25/EC, certified by RINA, compliant with SAE 1527, USCG type A1. Inner layer made of black, smooth synthetic rubber, resistant to oils and fuels with up to 50% aromatic hydrocarbon content. Reinforced with layers of synthetic cord, and for the POSEIDON LL hose, additionally with a steel spiral. Outer layer made of black, self-extinguishing synthetic rubber, resistant to oil and weather conditions (fire resistance: ISO 7840 Annex A: hose filled with fuel should withstand flame for 2.5 min). POSEIDON: The POSEIDON hose is a soft pressure hose without reinforcement with a steel spiral. The manufacturer recommends installing POSEIDON hoses with a diameter of over 19 mm in straight sections or with a gentle (large) bend radius. The hose is particularly used in the fuel tank filling installation of boats. POSEIDON hose with smaller diameters of 6, 8, 10, 13, 16, and 19 mm, with a working pressure of 10 bar, is available on special order. POSEIDON LL: The POSEIDON LL hose additionally has reinforcement with a steel spiral, providing resistance to vacuum and kinking. The hose is very flexible, with a minimum bend radius corresponding to just three times the inner diameter and can be easily installed in tight spaces of the boat's engine compartment. Its versatility and high quality make it frequently used by manufacturers of larger motor yachts. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord (POSEIDON); synthetic cord, steel spiral (POSEIDON LL). Outer layer: synthetic rubber. Working pressure: 10 bar. Operating temperature: from -30°C to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible suction and discharge hose made of a special oil-resistant PVC blend. Designed for the transfer of mineral oils and hydrocarbons as well as industrial water, wastewater, liquid fertilizers, and certain chemicals – particularly where enhanced PVC resistance to hydrocarbons is required. Not suitable for aromatic hydrocarbons (benzene, toluene, xylene, etc.). Can be used for some chemical products – diluted acids, bases, and alcohols. The hose maintains its flexibility even at negative working temperatures, and its lightweight and small bending radius ensure convenience and ease of handling. Reinforced with a hard PVC spiral, impact-resistant, providing very good vacuum resistance and preventing hose collapse. Smooth inner and outer surface. Resistant to UV radiation, ozone, weather conditions, and abrasion. Widely used in industry, agriculture, construction, and roadworks. As a hose reinforced with a hard PVC spiral (without a braid), it exhibits some elongation under pressure, which should be considered in applications, especially at temperatures above 40°C. Hose material: blue PVC. Reinforcement: white hard PVC spiral. Working pressure: from 2 bar to 5 bar - depending on the hose diameter. Working temperature: from -25°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transport and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). Inner layer made of black, smooth NBR/PVC rubber blend. Reinforced with layers of durable synthetic cord and steel spiral. It has copper wires ensuring electrical continuity between the hose ends – provided that it is properly connected to the fittings. Outer layer made of CR chloroprene rubber, flame-retardant, resistant to oil, seawater, abrasion, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms, successfully utilized in land applications. Higher working pressure versions (20 / 27 / 30 / 35 bar) available on special order, with specified breaking strength under tension (up to 2T for 2”, 4T for 3”, and 7T for 4”, 5”, and 6”) and ABS type approval for the complete hose. Inner layer: black NBR/PVC rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: from 17 bar to 20 bar - depending on the hose diameter. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of aviation fuel (jet fuel, kerosene, e.g., Jet A1) and petrochemical products containing up to 50% aromatic compounds, primarily for draining fuel from aircraft tanks, loading and unloading airport tankers and fuel dispensers. The outer layer is antistatic, abrasion-resistant, oil-resistant, and weather-resistant. It features copper wires ensuring electrical continuity (R < 100 Ω) between the hose ends and dissipation of electrostatic charges. Compliant with requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong suction-discharge hose for aviation fuel, intended for filling and emptying aircraft tanks, loading and unloading airport tankers and fuel dispensers. As a hose without metal components, it can be used for direct filling and emptying of aircraft tanks. It can be wound on reels. Suitable for aviation fuel for turbine engines (aviation kerosene, e.g., Jet A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Inner layer made of black, smooth NBR rubber. Reinforcement with layers of high-strength synthetic cord and a polymer spiral (PET). Outer layer made of black, antistatic synthetic rubber, resistant to abrasion, weather conditions, and contact with oil. Antistatic outer layer ensures the required low resistance of the hose between the ends (10^3 Ω < R < 10^6 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. Other diameters and hoses with fluorescent markings visible at night are available upon special order. Inner layer: black NBR rubber. Reinforcement: synthetic cord, PET spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: from -25°C to +70°C.
