Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulator MR SR, series BIT. Version used when rapid venting of the pneumatic system is required after a drop in supply pressure. The SR reducer should be installed between the actuating valve and the point of use. Pressure gauge connection: GW 1/8" BSP. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar, or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket PH type IF in ISO F standard with internal BSP thread. Leak-free "flat-face" connection. Designed mainly for industrial applications and hydraulic power systems. The socket features a safety pin to prevent accidental disconnection. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028 (up to size 1"). Material: AISI 316 Ti steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 315 bar (depending on the size of the quick coupling), safety factor 4:1. Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure sleeve, type FM, placed in the nut, allows for proper compression of the metric pipe to the fitting (coupling). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose designed for the transport of petrochemical products with aromatic compound content up to 50%, fuels, for oil systems, lubrication, etc. Outer layer resistant to fuels, oils, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: black NBR/PVC rubber. Working pressure: 10 or 20 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInsert used for pneumatic hoses with metric diameters. The outer diameter of the insert flange must match the outer diameter of the hose. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal dividing valve with mechanical control, spring rod assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A106 with internal BSP threads (seal on the thread). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of metric rings (front + rear) with nut for use in LET-LOK® type couplings. Quantity: 5 pieces. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube end with R134 HP (16 mm) or LP (13 mm) valve with internal UNF thread, for 3055 type air conditioning hose. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMGS18 series pressure gauge with a diameter of 100 and 150 mm compliant with EN837-1, featuring a safety valve (S1), filled with silicone oil. Designed for measuring low-viscosity and non-crystallizing liquids. The pressure gauge is intended for use in the chemical and petrochemical industries, as well as in conventional power plants. Resistant to harsh environmental working conditions and process media. High-quality Bourdon tube material allows for use in high-frequency pulsating pressures. The process connection is welded (TIG) to the housing, which strengthens the pressure gauge and ensures better housing sealing. Filling the gauge with silicone oil helps to reduce pointer fluctuations, decrease wear on moving parts of the mechanism under pressure pulsations and vibrations. Additionally, it prevents condensation and the formation of a corrosive atmosphere inside the pressure gauge that could damage internal components. Connection: lower or rear central. Dial diameter: 100 mm, 150 mm. Pressure range: 0 to 1000 bar, 0 to 1600 bar. Accuracy class: 1.0. Ambient temperature: from -40°C to +65°C. Medium temperature: up to +65°C maximum. Housing material: stainless steel. Window: tempered glass. Connection material: stainless steel AISI 316L. Bourdon tube: stainless steel AISI 316L (1000 bar), duplex stainless steel (1600 bar). Mechanism: stainless steel. Filling: silicone oil. Safety class: S1. Protection degree: IP 67 (EN 60529/IEC 529).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLip seal designed for suction and pressure hoses. For food applications. No resistance to greases and oils. Material: silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose designed for the transfer of liquid petrochemical products containing up to 30% aromatic compounds (excluding ester-based products). The outer layer is flame-retardant, manufactured according to ASTM C 542 standards, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, two steel spirals. Outer layer: black CR rubber. Working pressure: 5 bar. Vacuum: 0.5 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-B quick coupling plug with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a socket, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLogical element NOT-negation. Control by compressed air, reset by mechanical spring. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SKILLAIR® series, without end plates, is used to regulate working pressure, ensuring proper operation of the device. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - series 300). Operating temperature: up to +50°C. Connection: BSP female thread 1/4" ÷ 1". Pressure gauge connection: BSP female thread 1/8". Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at input pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsJIC 37° fitting, symmetrical tee, type "T", with external UNF thread (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable long "T" plug connector with external thread, type R37, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A203, reduction from external BSP thread (60° cone seal) to internal NPT thread (thread seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube fitting with internal UNF thread, for hose for air conditioning type 3055. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFront metric ring for use in LET-LOK® type couplings. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTEMA STANDARD quick coupling socket (NORDIC RANGE) with shut-off valve and internal BSP and NPT thread. The socket has an additional o-ring (besides the size 3/16"), making it suitable for gas installations. It also features a safety ring to prevent accidental disconnection. As a one-sided shut-off quick coupling, it can only be used for sizes 3/16" and 1/4", exclusively from the socket side. It is designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton, NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug intended for flexible pneumatic hoses in inch dimensions, series S, type PPFC. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ cap, equipped with a lock and chain to prevent loss, intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. With a symmetrical design of the connecting part, it easily connects with each other. Elements with the same hook spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe VOR series higher signal valve is designed to separate the higher value signal from two input signals. The input signals do not interact with each other. Operating pressure: 2 ÷ 10 bar. Operating temperature: from -10°C to +80°C. Body material: aluminum. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFR + L series BIT set with shaped membrane. It is characterized by high flow value with reduced pressure drop, high degree of condensate separation, and the ability to operate at low flow rates. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - "L" high-pressure tee type A126 with internal BSP thread (60° cone sealing) and 2 x external BSP threads (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMGS 18 series pressure gauge with a diameter of 63 mm compliant with EN837-1, in a safe design S2 (without front diaphragm), filled with silicone oil. Designed for measuring the pressure of gases and low-viscosity, non-crystallizing liquids, for use in the chemical and petrochemical industries, as well as for application in conventional power plants. Resistant to harsh environmental working conditions and process media. Can be used in drive units, pumps, water cleaning devices, presses, compressors, turbines, diesel engines, chemical, petrochemical, and refrigeration installations, as well as in machines and devices where pulsating pressures or mechanical vibrations occur. The filling of the gauge with silicone oil helps to: reduce indicator fluctuations, decrease wear on moving parts of the mechanism under pressure pulsations and vibrations. Additionally, it prevents condensation and the formation of a corrosive atmosphere inside the pressure gauge, which could damage internal components. Connection: lower or rear central. Dial diameter: 63 mm. Pressure range: 0 to 1000 bar. Accuracy class: 1.6. Ambient temperature: from -40°C to +65°C. Medium temperature: up to +65°C maximum. Housing material: stainless steel. Window: polycarbonate. Connection material: stainless steel AISI 316L. Bourdon tube: stainless steel AISI 316L. Mechanism: stainless steel. Filling: silicone oil. Safety class: S2. Protection degree: IP 67 (EN 60529/IEC 529).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric rear ring for use in LET-LOK® type couplings. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLubricator series SYNTESI®, without end connections, ensures proper lubrication of devices in pneumatic installations with oil mist. Standard version (STD), oil filling through the oil refill plug. Size: SY1, SY2. Tank capacity: 60 cm³ - SY1, 130 cm³ - SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Flow rate: 1600 l/min - 1/8", 3000 l/min - 1/4", 3650 l/min - 3/8", 6100 l/min - 1/2", 3/4", 1" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe suitcase contains a set of various BURGACLIP fittings for hoses type BU-3090 in sizes DN 8, 10, 12, 16, covering the most common service cases. It consists of: 80 BURGACLIP clamp bands, 40 BURGACLIP stabilizing clips, 39 BURGACLIP fittings (straight, angled, with UNF threads, for compressors, type SAE, ORFS) and 80 HNBR o-rings.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong pressure hose designed for hot oil in hydraulic systems under pressure up to 40 bar. The outer layer is made of blue synthetic rubber, self-extinguishing (in accordance with MSHA requirements), resistant to weather conditions. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic braid. Outer layer: blue self-extinguishing synthetic rubber. Working pressure: 40 bar. Operating temperature: from -30°C to +130°C (temporarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling with shut-off valve and internal BSP thread. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery, as well as in conveyors and mobile platforms. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Seal of the coupling: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 400 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple foot valve with protective cover and front plane sockets, used for foot control by the operator of devices in pneumatic systems. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 95 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with external BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: brass. Working pressure: 16 bar. Seal: black NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter, type A110, with external BSPT thread (seal on the thread) and external BSP thread (seal on the 60° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP end fitting with external UNF thread, with socket, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for LET-LOK® coupling designed for tubing with metric diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external BSPT thread (sealing on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug PH type IF in ISO F standard with internal BSP thread. Leak-free "flat-face" connection. Designed mainly for industrial applications and hydraulic power systems. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028 (up to size 1"). Material: AISI 316 Ti steel. Sealing: viton (operating temperature from -20°C to +200°C). Working pressure: up to 315 bar (depending on the size of the quick coupling), safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLogical element MEMORY-memory. Control by compressed air, reset by compressed air. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
