Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SKILLAIR® series, with end plates, is used to regulate working pressure, ensuring proper operation of the device. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Pressure gauge connection: BSP 1/8". Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at inlet pressure 6 bar Δp = 1 bar).- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A115C compact with internal BSP threads (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube end BURGACLIP with internal UNF thread, "short drop" - with a short section with a nut, for hose type 3090 for air conditioning. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFront inch ring for use in LET-LOK® type couplings. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-drip quick coupling plug type "flat-face" designed mainly for construction machinery, where large pressure spikes occur. Version with static pressure eliminator. The quick coupling can be operated with one hand. Depending on the application, the appropriate sealing material should be selected. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028. Application: hydraulic power (hydraulic oil), industrial. Working pressure: up to 500 bar. Material: steel with zinc-nickel coating. Sealing: NBR (from -25°C to +100°C). Maximum static pressure during coupling of quick couplings with plug with pressure eliminator: from the socket side 0 bar, from the plug side 400 bar. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction and discharge hose for low-pressure parts of hydraulic systems, based on the requirements of standard SAE J517 100 R4. Used primarily as a suction and return oil hose. Designed mainly for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids and water with a temperature limit of +70°C. Suitable for the transfer of various liquid products from the petrochemical industry with low aromatic compound content. Not recommended for gasoline, diesel fuel, and oils based on phosphate esters. The inner layer is made of black, smooth, oil-resistant synthetic rubber. The reinforcement consists of synthetic cord layers and a steel spiral providing high resistance to vacuum and very good flexibility of the hose without kinking. The outer layer is made of black synthetic rubber, resistant to abrasion, weather conditions, and light oil exposure. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVFR + L series NEW DEAL set with a high degree of reliability featuring a piston-type pressure reducing valve, consists of a shut-off valve, air filter, pressure reducing valve, and lubricator. It is designed for operation in harsh conditions, ensuring stability of the set pressure with variable supply pressure and functioning at low flow rates. The V3V valve allows for quick aeration and venting of the system. Connection: BSP thread 1/4", 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for discharge RA up to 10 bar. Output pressure range: 0÷8, 0÷12 bar. Filtration degree: 4 µm, 20 µm, 50 µm. Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Pressure gauge connection: BSP thread 1/8". Operating temperature: up to +50°C. Nominal flow: 480 l/min - 1/4", 1900 l/min - 3/8", 1/2" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ swivel coupling with internal BSP thread designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Symmetrical design of the connection part allows for easy coupling. Elements with the same coupling spacing can be connected. Material: brass. Working pressure: 16 bar. Seal: black NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A115 with internal BSP thread, with a swivel nut (60° cone seal) and with internal BSP thread, with a swivel nut (60° cone seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GAF filter series GA with BSP internal thread is used for removing contaminants contained in compressed air to ensure the proper operation of pneumatic system components. The package includes a mounting bracket. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Filtration degree: 40 µm. Supply pressure: up to 10 bar. Operating temperature: from -5°C to +70°C. Connection: BSP 1/8" to 1". Condensate drain: automatic (A). Flow rate: 1700 l/min - size 200, 3000 l/min - size 300, 4500 l/min - size 400, 10500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-B quick coupling socket with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a plug, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: brass. Sealing: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 180 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind nut intended for sealing one of the unused ports of a coupling (e.g., a tee) with a metric diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe pressure sleeve, type FC, placed in the nut, allows for proper compression of the inch pipe to the fitting (coupling). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp mounting sleeve for refrigerant hose ends, type 2051. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLip seal designed for suction and pressure hoses. Limited resistance to greases and oils. Material: black NBR rubber. Operating temperature: from -40°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible suction hose designed for the transfer of liquid products in the petrochemical industry, containing up to 30% aromatic compounds. It features a copper wire ensuring electrical continuity between the hose ends. The outer layer is resistant to abrasion, oil, and weather conditions. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black NBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatically adjustable NAMUR valve, used for controlling pneumatic actuators. Its connection allows for direct mounting of valves on the actuator body. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - Hostaform®. Minimum pilot supply pressure: 2.5 bar. Operating temperature: -10°C to +60°C. Nominal flow: 1100 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor, straight high-pressure connector, type A105, with internal BSP threads and swivel nuts (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filter regulator) FR, SKILLAIR® series, is a device consisting of a filter and a pressure reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on the size. Operating temperature: up to +50°C. Connection: BSP 1/4" to 1/2". Pressure gauge connection: BSP 1/8". Condensate drain: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: up to 3000 l/min at an inlet pressure of 6 bar (Δp = 1 bar), depending on the size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTube end with valve R134 HP (16 mm) or LP (13 mm) with internal UNF thread, for hose type 3055 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for unleaded gasoline, diesel oil, and liquid fuels containing up to 50% aromatic compounds. Used in industry and transportation for the transfer and handling of petrochemical products, in tank trucks, at road and rail loading and unloading terminals for fuels. Inner layer made of black, smooth, antistatic (R ≤ 10^6 Ω) NBR rubber (NBR1). Reinforced with layers of high-strength cord and a steel spiral. Equipped with two copper wires ensuring electrical continuity between the hose ends, provided they are properly connected to the fittings. Outer layer made of black, antistatic (R ≤ 10^6 Ω) synthetic rubber, self-extinguishing, resistant to abrasion, oil, ozone, and weather conditions. Through-wall resistance of the hose R ≤ 10^9 Ω (type M/T). Compliant with standards EN12115:11 (16 bar), EN 1761 (10 bar), ISO 2929 (10 bar), TRbF. Certified for explosion hazard zones Ex (ATEX). Excellent resistance to petrochemical products, strong construction, and antistatic properties of both inner and outer layers, built-in antistatic wires, recommend this hose for demanding applications, including in explosion hazard zones. In any case, however, use in explosion hazard zones (ATEX) should be preceded by a risk analysis conducted by a specialist. A version without wire (type Ω/T) is available upon special request. Inner layer: black, smooth NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +90°C (temporarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable STORZ nozzle with symmetrical connection designed for shaping liquid flow. Intended for use, e.g., at firefighting stations. Material: aluminum. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector type LET-LOK® with external BSP thread (seal LOK) for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The permissible working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free flat-face quick coupling designed mainly for construction machinery, where large pressure spikes occur. It features a pin to prevent accidental disconnection. The quick coupling can be operated with one hand. Depending on the application, the appropriate sealing material should be selected. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028 (except for size 3/16"). Application: hydraulic power (hydraulic oil), industrial. Working pressure: up to 720 bar. Material: steel with zinc-nickel coating, except for size 3/16", made of galvanized steel. Sealing: NBR (from -25°C to +100°C), viton (from -15°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLogical element YES-confirmation. Control by compressed air, reset by mechanical spring. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A107 without nut, with external BSP threads (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKILLAIR® D series filter, without end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 100, 200, 300. Filtration degree: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and type of drain. Operating temperature: up to +50°C. Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min - size 100, 360 l/min - size 200, 500 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting with internal UNF thread for hose for air conditioning type 3055. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type LET-LOK® with external BSPT thread for inch tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ reducing coupling intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same spacing of hooks can be connected. Material: brass. Working pressure: 16 bar. Seal: black NBR rubber.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN series 525 quick coupling socket (NORDIC RANGE) with shut-off valve and internal BSP thread. The socket features an additional O-ring, making it suitable for gas installations. It also has a safety ring to prevent accidental disconnection. As a one-sided shut-off quick coupling, it can only be used for size 1/4". It is designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and flexible, abrasion-resistant suction and discharge hose designed for the pressurized transfer of oils and fuels. A special blend of PVC, PU, and NBR provides high resistance to diesel fuel, biodiesel, and blue oil (fuel used in maritime shipping). Reinforcement with a galvanized steel wire spiral embedded in the inner PVC layer ensures good resistance to vacuum and hose collapse. The smooth inner layer reduces flow losses. Thanks to the braided reinforcement, the hose has high working pressure and low deformation under pressure. Used in the distribution, refueling, and transshipment of oils and fuels, e.g., in tank trucks for heating oil refueling in domestic heating systems. Hoses with diameters of 76 ÷ 102 mm have an external polyurethane layer (significantly increasing abrasion resistance) and a copper antistatic wire. Inner layer: black PVC / PU / NBR. Reinforcement: steel spiral, polyester braid. Outer layer: black PVC / PU / NBR (diameters 19 mm ÷ 63 mm); black PU (diameters 76 mm and above). Operating temperature: from -25°C to +60°C (working pressure dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRF NTB type throttling valve series COMPACT "N" used for simultaneous flow regulation in both directions - during filling and venting, applied in pneumatic systems for regulating the flow rate of compressed air and flow direction. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A205, internal BSP thread reduction (seal on the thread) to external NPT thread (seal on the thread). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAC series SYNTESI® activated carbon filter, without end connections, is used for purifying compressed air from oil residues, solvents, and odors. Purification occurs as air flows through the porous granulate of activated carbon with high pollutant absorption. This is the most effective air purification method used in industrial pneumatic installations. The efficiency and lifespan of the filter element can be increased by preceding it with a fine filter (0.01µm) and a pre-filter (5µm). Size: SY1, SY2. Oil residue at 20°C: 0.003 mg/m³ – air purity class according to ISO 8573-1: 1-7-1 (with a pressure drop not exceeding 75 mbar). Filter element lifespan: 4000 hours (with a pressure drop not exceeding 75 mbar). Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: from -10°C to +50°C. Condensate drain: manual / semi-automatic (RMSA). Recommended flow: 350 l/min - size SY1, 800 l/min - size SY2 (at a pressure of 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections in sizes A (110), B (75), and C (52). Material: steel (plastic handle).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector BURGACLIP for hose type 3090 for air conditioning. Material: steel.
