Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for LET-LOK® coupling intended for one-inch tubing. Material: AISI 316 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with internal NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose for industrial oils, mineral oils, unleaded gasoline (EN 228:2017), diesel fuel (EN 590:2010), heating oil (DIN 51 603 1÷5). Also suitable for compressed air. Inner layer made of black, smooth NBR rubber, antistatic R<106 Ω/m (EN ISO 8031:2009). Reinforcement with textile braid provides a safety factor of 3.15:1. Resistant to slight vacuum up to approximately 0.5 bar. Outer layer made of black, smooth NBR/EPDM rubber compound resistant to oil, ozone, abrasion, and weather conditions. Inner layer: black NBR rubber. Reinforcement: textile braid. Outer layer: black NBR/EPDM rubber. Working pressure: 25 bar. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-B quick coupling plug with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a socket, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: brass. Sealing: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 180 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF OMV series COMPACT "O" for installation in the connections of distribution valves, used in pneumatic systems to regulate the flow rate of compressed air and the direction of flow. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure plug type A113 with external BSP thread (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight pressure gauge connector JIC37° with internal BSP thread (sealing with a metal washer), type MAV. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® series lubricator, without end plates, ensures proper lubrication of devices in pneumatic installations with an oil mist. Size: 100, 200, 300. Tank capacity: 50 cm³ - size 100, 95 cm³ - size 200, 160 cm³ - size 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Flow rate: 1500 l/min - size 100, 3700 l/min - size 200, 5500 l/min - size 300 (at an inlet pressure of 6 bar and Δp = 1 bar). Oil filling methods: STD - standard version, filling through tank disassembly or plug, CA - automatic filling, replenishment only during the lubricator's operation, CD - vacuum filling, pressure drop inside the tank allows for filling, CAML - automatic filling with a minimum level, CDML - vacuum filling with a minimum level.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket TEMA STANDARD (NORDIC RANGE) with internal BSP, NPT thread. The socket has an additional o-ring (besides size 3/16"), making it suitable for gas installations. It also features a safety ring to prevent accidental disconnection. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: stainless steel AISI 316. Working pressure: up to 300 bar (depending on diameter). Safety factor 4:1. Sealing: viton. Operating temperature: from -20°C to +200°C. Flow rate is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp mounting sleeve for thin-walled refrigerant hose ends, type 2015B. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft rubber hose with an external braid made of galvanized steel, intended for gasoline and petroleum-based oils such as diesel, heating oil, and lubricating oil. Installed in fuel and oil systems of small vehicles and industrial equipment. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379. Inner layer made of smooth black NBR rubber. The external reinforcing braid made of galvanized steel provides high pressure resistance. The braid features a black marking stripe. Maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbon content: +40°C; for diesel oil: +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidizing detergents: +80°C. Hose material: black NBR rubber. Reinforcement: external wire braid made of galvanized steel. Working pressure: from 10 bar to 20 bar, depending on the hose diameter. Operating temperature: from -35°C to +80°C (maximum temperature depends on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-BX with internal thread and plug connection used mainly as a safety valve. When installed on the actuator's supply connection, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with internal BSP thread, with a reducer, intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. Featuring a symmetrical design of the connecting part, allowing for easy connection. Elements with the same coupling spacing can be connected. Material: stainless steel. Working pressure: 16 bar. Seal: viton.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - 90° high-pressure elbow JIS type A405 with external BSP thread (sealing inverted cone 60°) - TOYOTA and with external BSP thread (sealing ISO-1179 type G - O-ring with retaining ring). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing adapter with external and internal BSP thread for use in piping connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting with external UNF thread for hose for air conditioning type 3055. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight bulkhead fitting type LET-LOK® with external NPT thread for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTEMA STANDARD quick coupling plug (NORDIC RANGE) with shut-off valve and internal BSP and NPT thread. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft rubber hose with an external textile braid, primarily intended for fuel installations of leaded and unleaded gasoline as well as diesel oil for small vehicles (cars, motorcycles, mopeds, garden tractors) or industrial equipment. Installed, for example, between the fuel pump and the carburetor. Not suitable for engines with fuel injection systems. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379 type B (03/1982). The inner layer is made of smooth black NBR rubber. The external textile braid vulcanized with rubber reinforces the hose and protects against contact with hot components. The maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbon content: +40°C; for diesel oil: +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidizing detergents: +80°C. Hose material: black NBR rubber. Reinforcement: external black textile braid. Working pressure: 10 bar. Operating temperature: from -35°C to +120°C (temporarily), maximum operating temperature depends on the medium.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric shut-off valve V3V, SKILLAIR® series, without end plates, is used to separate the working system from the supply air. It is a normally closed, three-way valve. In the closed position, it cuts off the supply air while simultaneously venting the system, making it particularly useful during maintenance work. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow rate: 1650 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ swivel coupling with external BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Features a symmetrical design of the connecting part, allowing for easy connection. Elements with the same coupling spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - 90° elbow high-pressure JIS type A405T with external BSP thread (seal inverted cone 60°) - TOYOTA and with external BSPT thread (seal on the thread). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP end fitting with internal UNF SAE thread - sealing on a 45° cone, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to air conditioning system components. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal BSP threaded fitting for use in pipe connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible and elastic hose for unleaded gasoline and diesel fuel for passenger cars, trucks, and tractors. Can be used in the engine compartment of trucks. The inner layer is made of black, smooth NBR rubber highly resistant to fuel (oil resistance: RMA class A), suitable for use with most automotive fuels (standard diesel B7 (EN590:2017), biodiesel B20, B100, standard unleaded gasoline E5 (EN228:2017), E10, E85, and E100 - 100% ethanol). Reinforced with a durable textile braid providing a safety factor of 4:1. The outer layer is made of black, smooth, high-quality synthetic rubber resistant to oil, ozone, and weather conditions. Commonly used fuel hose for vehicles. Compliant with SAE J30R2 and SAE J30 R6 standards. Inner layer: NBR rubber. Reinforcement: textile braid. Outer layer: black synthetic rubber. Working pressure: 12 bar. Operating temperature: from -40°C to +100°C externally to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-drip "flat-face" ISO-F quick coupling with shut-off valve and internal BSP thread. Application: hydraulic power (hydraulic oil). Designed primarily for construction machinery. The socket features a pin to prevent accidental disconnection. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR, Viton. Operating temperature: from -25°C to +200°C, depending on the type of sealing. Working pressure: up to 300 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V series SYNTESI®, with end connections, is used to separate the working system from the supply air. It is a three-way, two-position, normally closed valve. In the closed position, it cuts off the supply air and vents the system, making it particularly useful for maintenance work. It has a system allowing for the installation of two padlocks of size SY1 or three padlocks of size SY2 with a diameter of 3 mm. Alternatively, a version with a Ø 7 hole for a single padlock is available. On the rear and front surfaces of the valve, there are auxiliary connections (1/8” for size SY1 and 1/4” for size SY2) for connecting a pressure gauge, pressure sensor, or for additional air intake. Size: SY1, SY2. Connection: BSP thread 1/8", 1/4", at the front and rear. Supply pressure: up to 15 bar, depending on the size. Operating temperature: from -10°C to +50°C. Nominal flow: up to 4000 l/min, depending on the size (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight reducing fitting type LET-LOK® for metric tubing intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ coupling with internal BSP thread and external BSP thread designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. Symmetrical design of the connecting part, allowing for easy connection. Elements with the same coupling spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - 90° high-pressure elbow type A116N with external BSP thread (60° cone sealing) and external BSP thread (ISO-1179 type G sealing: O-ring with retaining ring), adjustable. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° BURGACLIP fitting with internal UNF SAE thread - sealing on a 45° cone, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing nipple with external BSP threads on both sides for use in piping connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInch rear ring for use in LET-LOK® type couplings. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLip seal intended for suction and pressure hoses. Not suitable for food applications. Resistant to greases and oils. Material: viton. Operating temperature: from -15°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible rubber hose CODAN 3106 designed for leaded and unleaded gasoline. Used for connecting, e.g., the carburetor to the fuel pump in cars, motorcycles, mopeds, garden tractors, etc. Not suitable for engines with fuel injection systems. Based on the requirements of standard DIN 73379 type B (03/1982). Inner layer made of smooth black NBR/PVC rubber compound. Outer braid made of polyester fiber vulcanized with rubber reinforces the hose and protects against contact with hot components. Can also be used for water, cooling fluids, non-oxidizing detergents, air. Maximum operating temperature depends on the medium: for water and cooling liquids based on ethylene glycol: +90°C, for air: +80°C, for liquid non-oxidizing detergents: +80°C, for diesel fuel: +80°C, for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbons: +40°C. Hose material: black NBR/PVC rubber. Reinforcement: external textile braid (black polyester). Working pressure: from 5 bar to 13 bar, depending on the hose diameter. Operating temperature: from -30°C to +100°C (temporarily), maximum operating temperature depends on the medium.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe jaw holder for the P20 press is supplied with a magnetic handle for quick exchange of working jaws. It can be mounted on the floor or to a workstation (table) for the press. It provides a safe and easy storage place for a complete set of jaws. Capacity: 12 holes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GZ V3V series G shut-off valve with BSP internal thread is used to separate the supply air from the working part of the installation. When closed, the air behind the valve is released into the atmosphere. Particularly recommended as a safety measure during maintenance work. The package includes a mounting bracket/holder, a padlock, and 2 keys. Connection sets GA (L, T, U shapes) are used to connect individual components together. Size: 200, 300, 400. Connection: BSP 1/8" ÷ 1/2". Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Control: manual.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - 90° high-pressure elbow type A114N, adjustable, with external BSP thread (sealing ISO-1179 type G: o-ring with retaining ring) and internal BSP thread, with a swivel nut (sealing 60° cone, o-ring). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple with external BSP thread on both sides for use in piping connections, e.g., hot and cold water installations. Thread 1.1/2" and 2" - BSPT thread made according to ISO 7/1. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMR FC series BIT regulator. Version with controlled bleed, allows for increased accuracy in maintaining the set output pressure value through continuous, slight venting of air to the atmosphere. Pressure gauge connection: GW 1/8" BSP. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
