Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultiple lower plate for welding for mounting DIN 3015 double clamp type 301. Number of clamps: 5. Material: carbon steel or AISI 316L steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble upper plate for mounting heavy DIN 3015 clamp type 201. Material: carbon steel, galvanized or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUpper protective plate for mounting heavy-duty DIN 3015 clamp type 201. Material: carbon steel, galvanized or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUpper protective plate for mounting double DIN 3015 clamp type 301. Material: carbon steel, galvanized or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FLOWSAFE float has been designed for all hoses used in the marine industry. This particularly applies to supply hoses in connections between the vessel and the drilling platform. Thanks to the floats, the hoses remain on the water's surface, preventing damage from the vessel's propeller and allowing the floating unit to maneuver. The float can also serve as a protective cover for the hose. It can be used for both pressure hoses (without a spiral) and suction-pressure hoses (with a steel spiral) in sizes 3", 4", and 5". It is secured with stainless steel clamps placed in the grooves of the float. When using floats for pressure hoses, a special steel hose must also be used to attach the float to the hose and prevent its displacement when the hose is being handled and is not under pressure. It is flexible, unsinkable, and non-absorbent (pores 100% closed). It does not shrink or deform. UV resistant. Material: Bacell® - a special EVA foam. Load capacity: 16 kg. Weight: 2 kg. Volume: 18 dcm³.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum washer intended for Banjo screws. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCopper washer for use in high-pressure installations (for quick couplings, adapters with external threads). Working pressure: up to 2000 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBase for the manual clamping press UPJ.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBase for the manual UPS clamping press.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble nipple with GZ 1/4" BSP / GZ M12x1.25, used to connect the BLOWSTAR nozzle to the EWO air gun. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLid for pallet container with internal thread DIN EN 12713 and gasket. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover for IBC pallet container with internal BSP threaded opening. The opening can be used for filling the container. The cover is supplied with a gasket. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSemi-automatic device for bending hydraulic pipes with an electric drive hydraulic pump. The design and operating principle involve wrapping the pipe around a rotating template. The device is electronically controlled from a built-in panel, allowing for precise bending. By pressing the "start" button on the control panel, the machine independently bends the pipe to the specified angle without additional operator intervention. Optionally available dual electric foot pedal with a safety switch. Tools (templates) for bending the pipe are ordered separately (18 sizes). Bending range: 6 ÷ 50 mm (wall thickness 3 mm). Power supply: 400 V, 50/60 Hz, 1.1 kW. Maximum bending angle: 180°. Bending speed for a 90° angle: 6 seconds. Bending accuracy: ±1°.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), type B25B1, with external gearing, intended for use in hydraulic systems of machines and equipment. Material: body – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Liquid viscosity: from 12 cSt to 800 cSt (recommended from 17 to 65).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), type P38P2, with external gearing, intended for use in hydraulic systems of machines and equipment. Material: housing and mounting plate – aluminum, rear cover – cast iron. Sealing: NBR. Liquid viscosity: from 12 cSt to 800 cSt (recommended from 17 to 65).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: housing and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: left. The stated maximum working pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: BSP threaded. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: housing – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: left. The stated maximum working pressure applies to continuous operation. Material: body – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: right. The specified maximum working pressure applies to continuous operation. Material: body – aluminum, mounting plate and rear cover – cast iron. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: right. The specified maximum working pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLevel gauge designed for monitoring hydraulic oil levels, mounted on the side wall of the tank. It is equipped with a float that rises to the surface of the oil. It signals the minimum liquid level in the tank (lower position of the float). Oil enters the level gauge through openings in BANJO type mounting screws. Material: polyamide (body), aluminum (housing), polymethyl methacrylate (inspection hole). Maximum operating pressure: 2 bar. Electrical signal: maximum 48V AC/DC and 0.5 A. Protection class: IP 65. Operating temperature: from +5°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-flow nozzle for washing and cleaning with water. Ideal for cleaning large surfaces such as tanks, trucks, ships, in a short time. Characterized by high flow and strong jet at low supply pressure. Smooth adjustment of the nozzle - spray angle and opening and closing of the stream by rotating the head ring. Made of stainless steel (AISI 304), high-strength plastic cover (POM), and EPDM rubber ring. Working pressure: up to 16 bar. Continuous operating temperature: up to +60°C. Flow rate: 300 l/min (4 bar), 500 l/min (16 bar). Weight: 0.8 kg. Connection: GZ 1" BSP.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, ergonomic nozzle with smooth flow regulation by rotating the head (closed - narrow stream - wide stream). Brass nozzle, head and handle made of blue polypropylene. Connection: GZ 3/4" BSP. Working pressure: up to 16 bar. Operating temperature: up to +50°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar). Length: 239 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hose guide for use with a high-pressure washing gun. It limits the possibility of hose kinking at the connection point to the gun. Designed for hoses DN6 and DN8.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 backing flange with internal thread for connection to flange fitting, without mounting screws and sealing. Material: AISI 316L steel. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 backing flange with internal thread for connection to flange fitting, without mounting screws and sealing. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 backing flange with socket for welding to connect with flange fitting, without mounting screws and sealing. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight or bent extension for air guns with internal thread M12x1.12. Available in four different lengths (150 mm, 300 mm, 450 mm, and 800 mm). The extension allows access to hard-to-reach places, thereby increasing work safety and improving working conditions. Extensions can be mounted with all nozzles with M12x1.12 thread. On the mounting side to the gun body, the extensions have a locking nut for proper alignment. Increases safety and comfort of work. Material: anodized aluminum. Working pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure switch used in hydraulic power systems. Signals the achievement of a specified oil pressure value. The regulated value is adjusted using a knob. Installation is possible using a thread or plate connection. Material: aluminum (housing). Sealing: NBR. Pressure adjustment range: 2 ÷ 400 bar. Maximum load: 5 A at 250V AC; 0.25 A at 125V DC. Protection degree: IP 65. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe VSF valve supplies hydraulic oil from the connection P1 or P2 to the connection U. The power source is the connection with higher oil pressure (the second connection P1 or P2 is automatically blocked using a movable ball). The valves are equipped with mounting holes. Material: galvanized steel (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSolid nozzle for washing and cleaning with water, whose flow is regulated by manually bending the rubber nozzle. The flow is closed when the nozzle is not bent, ensuring water and time savings during operation. The nozzle is extremely resistant to damage (from stepping on it, being run over by a vehicle, etc.). Water Saver is available in 4 versions with nozzles of different diameters and flow rates (type L, M, R, and S). Made of brass, the nozzle is made of black nitrile rubber. Working pressure: up to 7 bar. Continuous operating temperature: up to +65°C (temporarily up to +100°C). Length: 230 mm. Connection: GW 3/4" BSP with a seal.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSolid nozzle for washing and cleaning with water, whose flow is regulated by manually bending the rubber nozzle. The flow is closed when the nozzle is not bent, ensuring water and time savings during operation. The nozzle is extremely resistant to damage (from stepping on it, being run over by a vehicle, etc.). Water Saver is available in 4 versions with nozzles of different diameters and flow rates (type L, M, R, and S). Made of stainless steel, the nozzle is made of black nitrile rubber. Working pressure: up to 7 bar. Continuous operating temperature: up to +65°C (temporarily up to +100°C). Length: 230 mm. Connection: GW 3/4" BSP with a seal.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCalorimetric air or nitrogen flow meter in the installation, optionally for other gases. Available in two pressure ranges up to 16 bar and up to 40 bar. The principle of calorimetric measurement is based on cooling an electrically heated sensor by the flowing air. The cooling of the sensor is directly dependent on the mass flow of air, thus it does not require compensation for pressure and temperature. The digital meter measures the instantaneous flow rate and counts the total consumption of compressed air using pulses. This is displayed on the screen, and all measurements can be transmitted via a Modbus RTU standard connection. The flow meter can be quickly and easily disassembled without removing the entire measuring section from the installation for cleaning or calibration. The flow meter blind plug ensures continuous use of the line during cleaning. A bypass line for the measuring section is not required. The EW 850 flow meter, due to its compact design, can be used to measure the flow and consumption of air in all installation locations from the compressor to the smallest devices and tools. The measurement range should be appropriately selected according to the flow in the installation. Due to the possibility of measurement errors, it is necessary to avoid condensation on the sensor element or moisture in the transmitted medium. Do not exceed the operating ranges of the flow meter! When selecting a flow meter for gases other than air or nitrogen, please contact Tubes International. Working pressure: up to 16 bar or up to 40 bar. Material: stainless steel AISI 304 (measuring section, for the 16 bar version), stainless steel AISI 316 (measuring section, for the 40 bar version), polycarbonate (housing). Medium: air, nitrogen (option - other gases). Flow unit: m³/h, l/min. Accuracy: ± 1.5% of the measured value, ± 0.3% of full scale. Analog output: 4 ÷ 20 mA, < 500 Ω. Pulse output: 1 pulse per m³ or liter, galvanically isolated. Digital output: RS485, Modbus RTU. Operating temperature: -30°C ÷ +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermoplastic hose terminated with TEMA 100 plug with TA-M-120 coupling and TA-M-150 socket TEMA 100. Cable length: 2.5 m. Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong, and flexible multi-braided hose, primarily used for high-pressure water cleaning and cutting, hydroforming, hydraulics, chemical injection, and high-pressure lubrication. The hose is pressure tested and supplied with the appropriate certificate. It meets the EN 1829-2 standard. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material of the end fitting and sleeve: stainless steel (end fitting), carbon steel, galvanized (sleeve). Working pressure: 3035 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, the strongest and flexible, eight-braid hose, mainly used for high-pressure water cutting, hydroforming, and laboratory applications. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material of the end fitting and sleeve: stainless steel (end fitting), carbon steel, galvanized (sleeve). Working pressure: 3200 bar. Operating temperature: from -30°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection to the pressure gauge 90° with internal BSP inch thread, adjustable and standard for ISO 15171-2, external thread M16x2, on the measuring tip side. The coupling is available in two variants: with free flow and with pressure surge damper. Material: steel with zinc-nickel coating. Working pressure: 630 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C.
