Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTool shank EST-L designed for machining the outer layer of rubber in hydraulic hoses requiring a longer cutting length. Material: hardened steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIL13 clamping sleeve for rubber hydraulic hoses with spiral reinforcement type R13 and R15. Use only with INTERLOCK hydraulic fittings from the same supplier. Assembly - external and internal machining. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-type sleeve designed for crimping hydraulic type ends (ends for high-pressure hoses type Z) in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L should not exceed the length of the tail of the end Lk. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack flexible universal hose with exceptional resistance to aging, weather conditions, and ozone, with good chemical resistance. Resistant to temperatures in a wide range from -60°C to +135°C. Extremely flexible, elastic, with high fatigue resistance to deformation, resistant to abrasion. Excellent for use in peristaltic pumps. Used for transfer and dosing in industry and services, e.g., for dispensing soap and disinfectants, cleaning agents, caustic soda, etching and galvanizing chemicals, in glass and window washing systems, etc. The soft hose material (61° Shore (A)) is very flexible and provides excellent longevity of up to 1000 hours of operation in a peristaltic pump. The hose is an alternative to commonly used hoses made from traditional rubber blends such as EPDM and chloroprene. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone (300 pphm). Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Characterized by low gas permeability compared to rubber hoses. Hose connection by welding is possible. The VACUUM version with thick walls is designed for continuous operation with vacuum and is resistant to cracking and aging. Full hose roll length: 15 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: norprene® - thermoplastic elastomer (TPE). Maximum operating temperature: +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose for cold and hot water for heavy-duty conditions, requiring high flexibility, abrasion resistance, weather resistance, and ozone resistance. Used, among other applications, for cooling and thermostating injection molds. Can be used for air. Application at temperatures above +95°C reduces hose lifespan. Not oil-resistant, also not recommended for air with oil mist. Recommended installation with clamps or ferrules. Inner layer: black EPDM rubber. Reinforcement: synthetic braid. Outer layer: black, blue, or red EPDM rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +95°C (20 bar), from -30°C to +140°C (10 bar), temporarily up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for industrial cooling systems (an alternative to copper tubes) and automotive air conditioning (only for filling and testing functions). Specifically for refrigerants (R22, R134a, R404a, R407c, R410a, R507) and compressor oils of the POE and PAG types. The hose in sizes from 1/12" to 1/4" can also be used for CO2 (R-744) transmission - using CO2 as a refrigerant requires pressures approximately 10 times higher than conventional refrigerants. Inner layer: polyamide (PA), for diameters from 1/12" to 1/4" a PA and TPE (thermoplastic elastomer) blend. Reinforcement: polyester braid. Outer layer: micro-perforated, abrasion-resistant polyurethane. Working pressure: from 45 bar to 120 bar, depending on hose diameter. Operating temperature: from -45°C to +130°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of various chemical substances, mainly for acid, base, ketone, formaldehyde, industrial alcohol, and glycol solutions. Frequently used in industrial plants for draining contaminated water and process water. Also suitable for seawater. Inner and outer layer antistatic R≤106 Ω/m. Available pressure version (without steel spiral) - ORLANDO hose. Vacuum: 0.9 bar. Inner layer: black EPM (EPR) rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPM (EPR) rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality hose primarily intended for cleaning rooms and equipment in the food industry. It can be used for air, cold and hot water, oil, hydraulic fluids, light chemicals, and cleaning fluids. Strong, flexible, resistant to twisting and kinking. Non-soiling outer layer, weather-resistant and abrasion-resistant, oil and fat resistant, with increased resistance to animal fats. Due to its high durability and low elongation, it is particularly recommended for drum reels. Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: blue Chemivic® rubber compound (NBR/PVC). Working pressure: 20.7 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with increased lifespan compared to the standard. Confirmed hose lifespan of 300,000 impulse cycles. Standards: EN 853 1SN, ISO 1436-1SN, SAE 100R1S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and pliable hose designed for the discharge of chemically aggressive vapors and for operation at elevated temperatures. Good temperature resistance, good resistance to acid and solvent vapors. Also resistant to UV radiation, ozone, hydrolysis, and biological corrosion. Durable against bending. Used for mechanical vapor extraction, air conditioning, and ventilation in motor vehicles (buses, cars, and caravans, recreational boats, etc.), at air intakes for engines and compressors, in pellet and plastic dryers, in blow molding machines, etc. Other diameters ranging from 15 to 800 mm available on special order. The flame-retardant version P2SP SE complies with the requirements of DIN 4102 B1 for building materials. Hose material: polyester fabric impregnated with black TPE (thermoplastic elastomer). Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHighly flexible and elastic polyurethane hose, featuring optimal mechanical properties and very high compressive strength over a wide temperature range. Calibrated outer diameter and wall thickness allow for the use of easy-to-use plug couplings from leading manufacturers. Resistant to abrasion, solvents, fuels, and hydrocarbons. Widely used in both pneumatic and hydraulic systems, in industrial robotics, and tool lines. Shore hardness (A): 90°. Available in natural, black, blue, green, red, and yellow colors. Hose material: PUR polyurethane. Working pressure: from 9 bar to 14.3 bar, depending on hose diameter. Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, tear-resistant, and kink-resistant spiral reinforced hose specifically designed for automotive workshops, for pneumatic control systems, hand tools, industrial robots, etc. Finished on both ends with straight sections of 100 mm and 500 mm in length and external BSPT threaded ends. Shore hardness (A) 98°. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 15 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight transparent smooth-walled hose made of natural (non-regenerated) fluoropolymer FEP (fluorinated ethylene propylene), a material with properties similar to PTFE. The hose features excellent chemical resistance, dimensional and shape thermal stability, and a smooth internal and external surface. Good transparency of the hose allows for easy observation of fluid level or flow. UV resistant. Designed for low-pressure installations of aggressive chemicals or where high purity and chemical inertness of the hose material are required. Commonly used in laboratories, chemical and pharmaceutical industries. Due to its excellent insulating properties, it is used in the electronics and semiconductor industries. The hose is not antistatic (does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic plug connections. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Safety factor n = 4:1. Hose material: FEP. Shore hardness (D) 55. Operating temperature: from -200°C to +206°C. Working pressure: from 4.25 bar to 13 bar - depending on the hose diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, resistant to kinks and atmospheric conditions welding hose for acetylene made according to ISO 3821 standard. Not recommended for gases produced from fuels, oils, and propane-butane (LPG). Inner layer: black SBR/NR rubber. Reinforcement: synthetic braid. Outer layer: smooth red SBR/NR rubber. Working pressure: 20 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction and discharge hose made entirely of abrasion-resistant polyurethane with high resistance to fats and oils. The hose is phthalate-free and can be used in the food industry for the transfer of liquid and dry food substances. This includes: - in particular, food fats and oils, e.g., olive oil (simulant D2; up to +40°C and 30 min); - milk and its derivatives, dairy beverages (simulant D1, up to +40°C and 30 min); - hydrated, acidic food, alcohol up to 20%, and dry food (simulants A, B, C, E; up to +70°C and 1 h). In applications not involving direct contact with food (in industry, construction, agriculture), it can be used for water, light chemicals, and other fat-based liquids as well as industrial oils (chemical resistance must be considered). Also used for air, vacuum transfer of dust, powders, granules, and other abrasive bulk materials (abrasiveness and potential static electricity issues must be considered). The very smooth inner surface reduces transmission losses and ensures ease of cleaning. The transparent wall allows for visual flow monitoring. Reinforcement with a dense steel wire spiral provides very good resistance to vacuum and hose collapse. The construction of the hose from polyurethane compared to similar PVC hoses results in significantly greater abrasion resistance, higher strength (working pressure and vacuum), and a wider temperature range with slightly less flexibility. The ARMORVIN TOTAL PU OIL TPHF hose complies with European regulations 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C, D1, D2, E), 2023/2006/EC (GMP), and American FDA 21 CFR 177.2600 (d). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent polyurethane. Reinforcement: galvanized steel spiral. Working pressure for a temperature of 20°C: from 3 bar to 7 bar - depending on the hose diameter. Operating temperature: from -40°C to +90°C, medium temperature, working pressure dependent on temperature. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE V (VISIFLON) hose is made of high-quality spiral corrugated PTFE, providing exceptional flexibility, elasticity, and vibration resistance among Teflon hoses. Like any Teflon hose, due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, minimal surface adhesion), the VISIFLON hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. In cases where there is a risk of static electricity (danger of charge generation and accumulation), VISIFLON hoses made of antistatic Teflon – the antistatic version AS – should be used. Antistatic Teflon is black (contains appropriately distributed graphite in PTFE) and has a resistance of R<108Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The selection of the hose in the standard version made of natural PTFE or in the antistatic version should be confirmed with Tubes International. The SS version braid is made of annealed AISI 304 stainless steel wire and provides high pressure resistance. At operating temperatures above +130°C, the maximum working pressure should be reduced by 1% for every 1°C increase in temperature. Available versions of the inner layer: standard (natural white) and antistatic (black). Hose material: spiral corrugated PTFE (Teflon). Reinforcement: AISI 304 steel braid. Working pressure: from 20 bar to 60 bar - depending on the hose diameter. Operating temperature: from -70°C to +230°C. Resistant to full vacuum up to a temperature of: +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong, and flexible pressure hose compliant with the dimensions and requirements of standard EN ISO 6134:2005 type 2 class A (Ω), with steel reinforcement, intended for conveying saturated and superheated steam. The inner layer has good resistance to high temperature and saturated steam. It can be temporarily used for superheated steam at a temperature of 232°C and pressure of 18 bar; prolonged use with superheated steam reduces the hose's lifespan. The outer layer is resistant to temperature, weather conditions, abrasion, and aging. Antistatic R ≤106 Ω. The hose is used in the chemical, petrochemical, energy industries, and other industrial applications. It is not intended for steam cleaners ("dry steam cleaners"). For steam, use special screw-on fittings designed for steam. To extend the lifespan, the hose should be emptied of steam after use to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double steel wire braid. Outer layer: black micro-perforated EPDM rubber. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible and lightweight suction and discharge hose intended for water, juices, beverages, and alcohols with a concentration of up to 20%, as well as other food products. Not suitable for fatty substances such as milk or oils. Resistant to vacuum and collapsing due to the embedded steel wire spiral in the hose wall. A significant advantage is its transparent wall resistant to UV radiation, allowing for easy visual monitoring of media flow, as well as the smoothness of its inner part reducing flow losses and ensuring ease of cleaning. Compared to the ARMORVIN HNA hose, it features higher working pressure and greater resistance to vacuum. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk substances (non-fatty). Abrasiveness and potential static electricity issues should be considered. As a hose reinforced with a steel spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP). Hose material: light green transparent PVC. Reinforcement: galvanized steel spiral. Working pressure: from 2 bar to 8 bar, depending on the hose diameter. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting bracket (angle bracket) intended for systems: SKILLAR series 100, BIT, SYNTESI, and NEW DEAL.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction plug of FERRARI lever connector with hose end, type F.11, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, sewage treatment, wastewater disposal, environmental protection. Material: carbon steel, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew coupling PVS of hydraulic quick coupling designed for installations with very high pressures, where significant mechanical loads occur. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Can be connected/disconnected when there is residual pressure in the system. End caps must be ordered separately. Material: carbon steel. Sealing: NBR. Flow: 1/4" - 16.4 l/min; (Δp = 4 bar), 3/8" - 21.3 l/min; (Δp=4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (connected coupling), 3/8" - 1850 bar (connected coupling), 1/4" - 1490 bar (disconnected coupling), 3/8" - 1500 bar (disconnected coupling). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling plug with valve and internal UNF thread. The couplings are available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with hose end, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and securing sleeve, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 4.2 bar. Operating temperature: from 0°C to +71°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external threaded plug with hexagon for key, intended for cold and hot water. Material: brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK F connector plug with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type B throttling and check valve (plug-in connection at the inlet and outlet of the valve) regulates the flow of air in both directions. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFour-way ball valve "X" type MKHX with internal BSP thread, designed for high-pressure hydraulic installations. Standardly equipped with mounting holes. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure needle valve designed for installation in a system or panel mounting. It features a compact design with a relatively high flow rate. Standard with a V-type stem (valve operation close - open). Each valve is factory tested. The valve has a special design allowing for panel mounting without the need to disassemble the needle, thus not voiding the Manufacturer's warranty. Connection material: AISI 316 steel. Stem material: AISI 316 steel. Valve sealing: metal/metal (AISI 316 steel). Packing seal: PTFE. Operating temperature: up to +230°C. Working pressure: up to 345 bar. Connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVM30 relief valve limiting maximum oil pressure in hydraulic systems. Allows free flow of fluid between P connections. When pressure exceeds the set value, the T path opens and excess oil drains to the tank. The opening pressure value is set using a screw (adjustment with an Allen key, locked with a locking nut). The valve is equipped with mounting holes. Body material: galvanized steel (1/4"), aluminum (3/8" and 1/2"). Valve material: galvanized steel. Sealing: NBR. Maximum working pressure: 350 bar (1/4"), 260 bar (3/8" and 1/2"). Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gate valve type 2000 with metal-metal sealing and non-rising stem, intended for industrial installations. Allows for regulation or throttling at low flow rates. Maximum constant working pressure across the full temperature range. Body material: brass. Disc material: brass. Handle material: carbon steel. Stem sealing: EPDM. Connection: BSP female thread. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with internal trapezoidal thread compliant with DIN EN 12713 standard and external BSP or BSPT thread. The trapezoidal threads, which are standardly equipped on IBC connectors, are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLoading coupling socket TW type MK with internal BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Designed for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: brass. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). coupling sealing (seal type GSD, for 4" type TWO): NBR. Thread sealing (seal type GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type B3 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary elbow, screw-in with external BSPT tapered thread, series F type R 31C NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-plated coating through a special chemical process, and Viton seals ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight through plug connector, type R3, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality straight plug connection with external BSPT thread, made entirely of AISI 316L steel, series 60000. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC adaptor compliant with DIN EN 12713 standard - internal trapezoidal thread to external thread. The trapezoidal threads, which are standardly equipped in IBC connections, are 100% compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal BSPT thread/internal BSP type A4 thread adapter, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREELCRAFT series 30000 drum reel with manual drive for water, air, and oil. It features high durability and resistance to vibrations. The construction is bolted, with no welded components. Designed for industrial and outdoor applications. The drum does not come with a hose, which must be ordered separately. Available version BA with gearbox. The drum of this series can also be mounted on a cart. Advantages: robust construction drum for long hoses. Material: powder-coated steel. Operating temperature: from -30°C to +120°C.
