Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe balancer with automatic locking is designed to relieve hand tools, power tools, etc., to improve work comfort. By means of spring lift, it neutralizes the weight of the suspended tool, enhancing safety and ergonomics, as well as helping to prevent accidental dropping, which protects against potential damage. The spring lift is adjustable using a flat wrench. The balancer's lift should be adjusted to the weight of the suspended tool. Housing material: cast aluminum. Cable material: stainless steel. Cable length: 2500 mm. Cable thickness: 2.5 mm. Operating temperature: up to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / Details16-channel comb nozzle, flat flow, finished with external thread 1/4" BSP. Ideal for cleaning and cooling. Without adapter. Material: blue polyamide. Maximum pressure: 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible steel braid, used to protect hoses from mechanical damage, abrasion, and temperature. It also increases their strength under elevated pressure. It can be clamped with a hose clamp or sleeves. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P20 CS press is powered by a 1.6 kW electric motor with a voltage of 12 V or a 2.2 kW motor with a voltage of 24 V, supplied from a battery, specifically designed for equipping service vehicles and technical wagons. The clamp diameter is adjustable using a micrometric knob. The achievement of the clamp diameter is indicated electrically via an LED indicator. The press is available in two versions where the clamping head can be positioned on the right or left side. All FINN-POWER clamping presses are adapted for use with interchangeable jaw sets (ordered separately). For example, for a clamp diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 should be ordered.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-vulcanizing silicone tape PYROSIL used for sealing the PYROJACKET cover and PYROTAPE. It does not have an adhesive layer, but when overlapping itself or on PYROJACKET or PYROTAPE, it vulcanizes in a few seconds. Resistant to radiant heat, moisture, and vibrations. Due to its very good dielectric strength, it is suitable as an electrical insulator. A 50% overlap and a clean, dry surface are recommended during installation. Not recommended for contact with flames and splashes of molten metal. Material: silicone in rust color. Operating temperature: up to +246°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe UPS crimping press is designed for crimping textile-reinforced hoses with EC-type ferrules using a manual lever. It is standardly equipped with two sets (of 8 crimping segments each) of jaws. The working range for the internal diameter of the crimped hoses for the UPS-3 press: DN 3 ÷ 8 (range of internal diameters of EC ferrules: 8 ÷ 17 mm), DN 10 ÷ 16 (range of internal diameters of EC ferrules: 18 ÷ 28 mm). An additional base with index EC-100250 can be purchased for the press.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe balancer without automatic locking is designed to relieve hand tools, power tools, etc., to improve work comfort. By means of spring lift, it neutralizes the weight of the suspended tool, enhancing safety and ergonomics. The spring lift is adjustable using a knob located on the body. The balancer's lift should be adjusted to the weight of the suspended tool. Housing material: cast aluminum. Cable material: stainless steel. Cable length: 1600 mm. Cable thickness: 2 mm. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFE SLEEVE cover made of dense fabric designed to protect hoses or bundles of hydraulic and pneumatic lines. Excellent abrasion resistance (tested according to SFS-EN ISO 12947-3), chemically resistant and UV resistant, low electrical conductivity. The cover protects people nearby from a bursting hose. Complies with EN ISO 3457 and EN 12999 standards. The attribute tape width specifies the width of the cover in a flat state. Material: black polypropylene (without printing). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong glass fabric coated on both sides with rust-colored silicone, with a weight of 1085 g/m². Primarily used as a welding shield, as well as in outdoor applications and in the offshore industry, due to its resistance to moisture and sunlight. Material: glass fabric coated with silicone. Operating temperature: from -54°C to +260°C (temporarily up to +1185°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gun for air, water, and non-explosive fluids. Designed mainly for blowing out contaminants, including in hard-to-reach places. Characterized by high blowing force, with adjustable flow size. Lightweight construction, ergonomic shape of the gun, and low trigger pull force ensure high work comfort. The gun is standardly equipped with a socket with a 1/4" BSP or 1/4" NPT thread. This model is available with a 90 mm bent nozzle, which is non-replaceable. Material: POM (body), brass (valve). Sealing: NBR. Working pressure: 16 bar. Burst pressure: 64 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P20 HP hydraulic press with manual pump drive is suitable for use where there is no access to electricity or compressed air, and its compact design and low weight allow for repairs at the site of failure. It features a mechanical indicator (control pins) for achieving the clamping diameter and the ability to set the head in two positions (90° rotation). It is intended for repair workshops, service points, and technical vehicles. All FINN-POWER clamping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a clamping diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 must be ordered.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsASTA version of the PROTECTOR cover is fully antistatic, designed for underground work and other special environments that require a conductive surface. Compliant with standard EN ISO 80079-36:2016, which is related to the ATEX directive for non-electrical equipment in explosive atmospheres. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial version of the PYROJACKET shield designed primarily for aviation (manufactured according to SAE Aerospace Standard 1072E), railway industry (compliant with DIN EN 45545-2:2013-08), and marine applications. Additionally, it is certified in diameters from 13 mm to 127 mm by DNV for temperatures up to +800°C for 30 minutes (ISO 15540) and by MSHA (for use in mines). A VCO version with flame-retardant Velcro is available upon request, in diameters ranging from 22 mm to 140 mm, with lengths up to 30 meters. The Velcro mounting allows the shield to be easily installed without disconnecting wires, hoses, or pipes. Material: fiberglass coated with silicone in a rusty color. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes), (up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight plastic compressed air gun designed for removing various contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Made of durable glass fiber reinforced polyamide. Ergonomic shape and lever action that does not require force ensure user comfort. Due to its low weight and plastic construction, it is particularly recommended for the automotive, textile, electronic industries, etc. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, interchangeable, with an external connection thread M12x1.25. Instead of the standard nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, we distinguish a gun finished with a EUROSTANDARD 7.2 plug, a hose end with a diameter of 6 mm, 9 mm, and 13 mm, or an internal thread of 1/4". Material: body - blue polyamide (PA6 GK30) reinforced with glass fiber; sealing - NBR, PU. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P20 NMS crimping press is a basic stationary device for workshops, service centers, and small plants producing hydraulic hoses with an internal diameter of up to 1.1/2”, intended for small-scale hose production. It is powered by a three-phase electric motor (400 V) with a power of 3 kW. The control of the achieved crimp diameter is done using an optical indicator (LED light), and once the diameter is reached, the press jaws stop. The crimp diameter setting is adjustable with a micrometric knob with a setting accuracy of 0.01 mm. All FINN-POWER crimping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a crimp diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 should be ordered. The P20X machine can be additionally equipped with a base or a bracket with sockets for storing jaws, complete with a magnetic holder for their quick exchange.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtended straight nozzle type Star-Tip, reducing noise levels; direct installation to the gun body. Sound intensity below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with OSHA standard 1-13.1. (European Agency for Safety and Health at Work). Nozzle length: 300 or 500 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong cover equipped with Velcro® fastening - "hook and loop" along the entire section, easy to install on wire harnesses and to dismantle. The fabric used for SAFE WRAP is characterized by excellent tensile strength (EN ISO 13934-1) and is 100% waterproof (EN 24920). SAFE WRAP also meets the requirements of standard ISO 3457 (conducted porosity test). It has high abrasion resistance. Available in other inner diameters. Material: black polyamide fabric coated externally with black polyurethane. Operating temperature: from -20°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P20 X crimping press is a basic stationary device for workshops and small plants producing hydraulic hoses with an internal diameter of up to 1.1/2”. The press features a simplified hydraulic system and is designed for the production of individual hoses (unit production). It is powered by an electric motor available in two supply variants: single-phase 230 V with a power of 1.5 kW and three-phase 400 V with a power of 2.2 kW. The control of the achieved crimp diameter is done using an optical indicator (LED light), and once the diameter is reached, the press jaws stop. The crimp diameter setting is adjustable with a micrometric knob with a setting accuracy of 0.01 mm. All FINN-POWER crimping presses are adapted for use with interchangeable jaw sets (ordered separately). For example, for a crimp diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 should be ordered. The P20X machine can also be equipped with a base or a rack with sockets for storing jaws, complete with a magnetic holder for their quick exchange.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAir screen nozzle equipped with a central hole and side slots, creating an air stream around the nozzle, protecting the operator from back pressure; for direct installation on a tube. Sound intensity below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with OSHA standard 1-13.1. (European Agency for Safety and Health at Work). Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal reflective shield in the form of rolls or shorter sheets, with a grammage of 678 g/m², designed to reflect over 90% of radiant heat energy. Used in cases where radiated heat (infrared radiation) must be blocked and reflected. Resistant to abrasion, water, and oil. Good flame resistance. Shield available in roll widths of 1016 mm and 1525 mm. Material: aramid fabric, aluminum foil. Operating temperature: up to +343°C (temporarily up to +538°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrack and twist resistant, FEP heat shrinkable tubing for use in various industrial sectors. Long service life measured in years, even when operating under high pressures. Smooth surface prevents contamination adhesion. Excellent temperature resistance. Widely used in industry (e.g., as a cover for rollers in paper production and in printing). Material: fluorinated ethylene propylene (FEP). Maximum operating temperature: +204°C. Shrink temperature: from +121°C to +204°C (shrinkage in the range of 20 ÷ 25%). Hardness: 53° Shore (A). Density: 2.15 g/cm³.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P32 NMS crimping press is a basic stationary device for workshops, service centers, and small plants, intended for small-scale production of hoses. The larger head compared to the P20 allows for crimping hydraulic hoses up to 2" in diameter. It is powered by a three-phase electric motor (400 V) with a power of 4 kW. The control of achieving the crimp diameter is done using an optical indicator (LED light), and once the diameter is reached, the press jaws stop. The crimp diameter setting is adjustable with a micrometric knob with a setting accuracy of 0.01 mm. All FINN-POWER crimping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a crimp diameter range from 10 to 87 mm, 17 sets of standard jaws from FP-32-10 to FP-32-78 should be ordered. The P32 NMS machine can also be equipped with a base or a bracket with sockets for storing jaws, complete with a magnetic holder for their quick exchange.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral cover designed to protect hoses (hoses) from abrasion, impacts, and crushing. It also serves to maintain a group of hoses (hoses) in the form of a bundle. Improves visibility of the covered hoses. Resistant to acids, oils, solvents, and UV radiation. ABRA is a two-color version of the PROTECTOR cover with a so-called wear indicator. It is black on the outside and yellow on the inside. ABRA helps identify areas that require closer observation - as soon as the black layer wears away revealing the yellow color, it will signal that the spiral may soon need to be replaced. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal, thick fiberglass insulation. Excellent thermal and electrical insulation properties. As a protective cover for hoses and hoses, it can be used independently or, for example, under the PYROJACKET or SILICAFLEX cover to significantly enhance the insulation effect. Available in two wall thicknesses: 3.2 mm - TSB and 1.6 mm - TSBL. Material: fiberglass. Operating temperature: up to +538°C (temporarily up to +705°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gun for air, water, and non-explosive fluids. Designed primarily for blowing out contaminants, including in hard-to-reach places. Characterized by high blowing force, with adjustable flow size. Lightweight construction, ergonomic shape of the gun, and low trigger pull force ensure high work comfort. The gun is standardly equipped with a socket with a 1/4" BSP or 1/4" NPT thread. This model is available with a 90 mm bent, interchangeable nozzle. A wide range of additional accessories allows for adaptation to specific application requirements. Material: POM (body), brass (valve). Sealing: NBR. Working pressure: 16 bar. Burst pressure: 64 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P32 X crimping press is a basic stationary device for workshops and small plants, featuring a simplified hydraulic system, designed for producing individual hoses (unit production). The larger head compared to the P20 allows for crimping hydraulic hoses up to 2" in diameter. It is powered by an electric motor available in two supply variants: single-phase 230 V with a power of 1.5 kW and three-phase 400 V with a power of 2.2 kW. The control of the achieved crimp diameter is done using an optical indicator (LED light), and once the diameter is reached, the press jaws stop. The crimp diameter setting is adjustable via a micrometric knob with a setting accuracy of 0.01 mm. All FINN-POWER crimping presses are adapted for use with interchangeable jaw sets (ordered separately). For example, for a crimp diameter range from 10 to 87 mm, 17 sets of standard jaws from FP-32-10 to FP-32-78 should be ordered. The P32 X machine can also be equipped with a base or a bracket with sockets for storing jaws, complete with a magnetic holder for their quick exchange.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible rubber nozzle for compressed air, designed for quick removal of all contaminants from surfaces. Flow regulation through bending of the nozzle. It performs excellently in situations where we deal with delicate surfaces prone to damage from direct contact. Depending on the connection, we distinguish between a nozzle with a hose end of 6 mm and 9 mm diameter or a EUROSTANDARD 7.2 plug. Nozzle opening diameter: 2 mm. Nominal flow: 200 l/min at 6 bar pressure. Maximum pressure: 10 bar. Operating pressure: 1 ÷ 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal protection in the form of rolls or shorter sheets designed to protect hoses, hoses, and other components from metal splashes, intense radiant heat, flames, and welding spatter. High content of pure silica (over 96%) ensures excellent temperature resistance, flexibility, and minimal shrinkage. It does not emit smoke or fumes. Available in three versions, in rolls of 915 mm and 1525 mm width: SILICAFLEX BLANKET 18 – thickness 0.76 mm, SILICAFLEX BLANKET 32 – thickness 1.25 mm, SILICAFLEX BLANKET 36 – thickness 1.27 mm. There is also a special version of SILICAFLEX BLANKET coated with a reflective aluminum layer (FQSFB36-36AL). The aluminized SILICAFLEX BLANKET, in addition to the features of the standard SILICAFLEX cover and reflecting intensely radiating heat, also has better tear and abrasion resistance, as well as improved water and oil resistance. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTUBOMATIC H25 crimping press with manual drive, designed for crimping low-pressure hoses with EC type ferrules. Easy and lightweight device, equipped with three sets (of 6 crimping segments each) of jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. Crimping diameter range: 10 ÷ 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled protective hose reinforced with vulcanized synthetic braid. Material of the outer layer: black SBR rubber. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber nozzle for CEJN guns for use on delicate surfaces; direct installation on the tube. Available diameters: Ø 14 mm, Ø 25 mm, and Ø 34 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGT35 cover made of very dense polyester fabric. Designed to protect individual hoses or bundles of hydraulic and pneumatic lines. It has good mechanical resistance as well as resistance to oils and organic products. Protects the hose and safeguards the operator from oil spray in case of hose rupture. Material: polyester. Operating temperature: +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTUBOMATIC H25 PI crimping press with pneumatic drive, designed for crimping low-pressure hoses with EC type metal sleeves. Easy and lightweight device, equipped with three sets (of 6 crimping segments each) of jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. Crimping diameter range: 10 ÷ 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal tape coated on one side with a bonding adhesive when stretched. Designed to protect hoses, hoses, and pipes from intense radiant heat and flames. The thickness of the tape is approximately 0.76 mm. A 50% overlap is recommended during installation. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details8-channel comb nozzle, flat jet, finished with a 1/4" BSP external thread. Designed for blowing off various contaminants from larger surfaces: liquids, fine chips, shavings, etc. Characterized by high blowing force at low noise levels. Ideal for the construction of air knives. Suitable for harsh conditions, e.g., at very high temperatures. Compliant with OSHA standard 1910.95 (b), STD 1-13.1, and directive 2003/10/EC. Material: ULTEM1000. Working pressure: up to 10 bar. Operating temperature: from -20°C to +200°C. Flow rate: 580 l/min (at 8 bar pressure). Noise level: 81.5 dB (at 8 bar pressure). Blowing force: 5.05 N.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe manual crimping tool UPJ is designed for crimping hoses with textile reinforcement using EC type ferrules. It is standardly equipped with two sets (of 6 crimping segments each) of jaws for the internal diameters of crimped hoses: DN 4 ÷ 8 (range of internal diameters of EC ferrules: 10 ÷ 17 mm), DN 8 ÷ 10 (range of internal diameters of EC ferrules: 16 ÷ 22 mm). An additional base with index EC-100271 can be purchased for the press.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFE SLEEVE MSHA cover made of dense fabric designed to protect hoses or bundles of hydraulic and pneumatic lines. Excellent abrasion resistance (tested according to SFS-EN ISO 12947-3), chemically and UV resistant, low electrical conductivity. The cover protects people nearby from a bursting hose. Complies with EN ISO 3457 and EN 12999 standards. The product is flame retardant and approved for use in mines. The attribute width of the tape specifies the width of the cover in a flat state. Material: black polyester (with print). Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDOWTY metal-rubber gasket, inch, for high-pressure connections. Material: washer - carbon steel, sealing - NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure regulator nozzle; for direct installation on tubing; reduces maximum pressure below 2 bar. Compliant with OSHA standard 1-13.1 (European Agency for Safety and Health at Work). Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible cover made from tape cut from PE pipe. Designed for protecting electrical hoses and hoses, as well as bundling them together. Resistant to acids, oils, solvents, and UV radiation. Material: black polyethylene (PE). Operating temperature: from -30°C to +80°C.
