Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket Leak-free quick coupling ISO-F "flat-face" type IF with a BSP female thread. Intended mainly for construction machinery, where large pressure surges occur. The zinc-nickel coating provides several times greater corrosion resistance than a zinc coating. The socket has a stem to prevent accidental disconnection. interchangeable with quick coupling ISO-F from other manufacturers. Application: power hydraulics (hydraulic oil). Material: steel with a zinc-nickel coating. Sealing: NBR (Operating temperature from -25°C to +100°C); Viton (Operating temperature from -15°C to +200°C). Working pressure: up to 400 bar (depending on the quick-coupling size). The flow is given for a pressure drop of 3 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve with a BSP female thread. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery, as well as in conveyors and mobile platforms. Commonly called "euro couplings". interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing socket: NBR. Operating temperature: from -25°C to 100°C. Working pressure: up to 400 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn ISO-B quick-coupling socket with a valve, BSP female thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Together with a plug, it forms a double shut-off coupling, which can be found wherever transmission lines must be connected and disconnected for servicing or maintenance of equipment and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug Leak-free quick coupling ISO-F "flat-face" type IF with a BSP female thread. Intended mainly for construction machinery, where large pressure surges occur. The zinc-nickel coating provides several times greater corrosion resistance than a zinc coating. interchangeable with quick coupling ISO-F from other manufacturers. Application: power hydraulics (hydraulic oil). Material: steel with a zinc-nickel coating. Sealing: NBR (Operating temperature from -25°C to +100°C); Viton (Operating temperature from -15°C to +200°C). Working pressure: up to 400 bar (depending on the quick-coupling size). The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling socket "flat-face" ISO-F with a shut-off valve and a BSP female thread. Application: power hydraulics (hydraulic oil). Intended mainly for construction machinery. The socket has a stem to prevent accidental disconnection. The quick coupling can be operated with one hand. interchangeable with quick coupling ISO-F from other manufacturers. Material: galvanized steel. Sealing: NBR, Viton. Operating temperature: from -25°C to +200°C (depending on the type of seal). Working pressure: up to 300 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket PH type IF to the standard ISO F with a BSP female thread. Coupling Leak-free type "flat-face". Intended mainly for industrial applications and power hydraulics. The socket has a stem to prevent accidental disconnection. The quick coupling can be operated with one hand. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028 (up to size 1"). Material: AISI 316 Ti. Sealing: Viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 315 bar (depending on the quick-coupling size), Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn ISO-B quick-coupling plug with a valve, BSP female thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Together with a socket, it forms a double shut-off coupling, which can be found wherever transmission lines must be connected and disconnected for servicing or maintenance of equipment and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe TEMA STANDARD (NORDIC RANGE) quick-coupling socket with a shut-off valve and a BSP and NPT female thread. The socket has an additional O-ring (except for the 3/16" size), which makes it suitable for gas installations. It also has a ring to prevent accidental disconnection. As a single-shut-off quick coupling it can only be used for sizes 3/16" and 1/4", only from the socket side. It is intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Sealing: viton, NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling plug with a shut-off valve with a BSP female thread. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery, as well as in conveyors and mobile platforms. Commonly called "euro couplings". interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing plug: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 400 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug PH type IF to the standard ISO F with a BSP female thread. Coupling Leak-free type "flat-face". Intended mainly for industrial applications and power hydraulics. The quick coupling can be operated with one hand. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028 (up to size 1"). Material: AISI 316 Ti. Sealing: Viton (Operating temperature from -20°C to +200°C). Working pressure: up to 315 bar (depending on the quick-coupling size), Safety factor 4:1. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling plug type "flat-face" intended mainly for construction machinery, where large pressure surges occur. Version with a static-pressure eliminator. The quick coupling can be operated with one hand. Depending on the application, the appropriate seal material should be selected. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028. Application: power hydraulics (hydraulic oil), industrial. Working pressure: up to 500 bar. Material: steel with a zinc-nickel coating. Sealing: NBR (from -25°C to +100°C). Maximum static pressure when connecting quick couplings with a plug with a pressure eliminator: on the socket side 0 bar, on the plug side 400 bar. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn ISO-B quick-coupling socket with a valve, BSP female thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Together with a plug, it forms a double shut-off coupling, which can be found wherever transmission lines must be connected and disconnected for servicing or maintenance of equipment and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: brass. Sealing: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 180 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling socket type "flat-face" Intended mainly for construction machinery, where large pressure surges occur. It has a stem to prevent accidental disconnection. The quick coupling can be operated with one hand. Depending on the application, the appropriate seal material should be selected. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028 (except for size 3/16"). Application: power hydraulics (hydraulic oil), industrial. Working pressure: up to 720 bar. Material: steel with a zinc-nickel coating, except for size 3/16", made of galvanized steel. Sealing: NBR (from -25°C to +100°C), Viton (from -15°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe CEJN series 525 (NORDIC RANGE) quick-coupling socket with a shut-off valve and a BSP female thread. The socket has an additional O-ring, which makes it suitable for gas installations. It also has a ring to prevent accidental disconnection. As a single-shut-off quick coupling it can only be used for size 1/4". It is intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn ISO-B quick-coupling plug with a valve, BSP female thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Together with a socket, it forms a double shut-off coupling, which can be found wherever transmission lines must be connected and disconnected for servicing or maintenance of equipment and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: brass. Sealing: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 180 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket without a valve quick coupling TEMA STANDARD (NORDIC RANGE) a BSP female thread, NPT. socket has additional O-ring (except for size 3/16"), which makes it suitable for gas installations. It also has a ring to prevent accidental disconnection. is Intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: stainless steel AISI 316. Working pressure: up to 300 bar (depending on the diameter). Safety factor 4:1. Sealing: Viton. Operating temperature: from -20°C to +200°C. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug TEMA STANDARD (NORDIC RANGE) with a shut-off valve and a BSP and NPT female thread. Intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Sealing: Viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for Viton). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling plug "flat-face" ISO-F with a shut-off valve and a BSP female thread. Application: power hydraulics (hydraulic oil). Intended mainly for construction machinery. The socket has a stem to prevent accidental disconnection. The quick coupling can be operated with one hand. interchangeable with quick coupling ISO-F from other manufacturers. Material: galvanized steel. Sealing: NBR, Viton. Operating temperature: from -25°C to +200°C, depending on the type of seal. Working pressure: up to 300 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling socket type "flat-face" Intended mainly for construction machinery, where large pressure surges occur. It has a stem to prevent accidental disconnection. The quick coupling can be operated with one hand. Depending on the application, the appropriate seal material should be selected. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028 (except for size DN5). Application: power hydraulics (hydraulic oil), industrial. Working pressure: up to 500 bar. Material: steel with a zinc-nickel coating. Sealing: NBR (from -25°C to +100°C), Viton (from -15°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and a metric male thread. A "push-pull" version - automatic disconnection upon accidental pulling of the line. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called "euro couplings". interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing socket: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and a BSP female thread. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called "euro couplings". interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing socket: NBR (Operating temperature from -25°C to +100°C). Working pressure: up to 350 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket SNAP-TITE with a BSP female thread American-made is characterized by a unique valve design, which allows laminar flows to be achieved. Depending on the application, the appropriate coupling and seal material should be selected. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Standard: MIL-C-51234. Working pressure: up to 155 bar (depending on the quick-coupling size), Safety factor 2:1. Material: brass. Sealing: NBR (Operating temperature: from -35°C to +120°C), Viton (Operating temperature: from -26°C to +204°C). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket CEJN 525 series (NORDIC RANGE) with a shut-off valve and an eliminator and a BSP female thread. socket has additional O-ring, which makes it suitable for gas installations. It also has a ring to prevent accidental disconnection. is Intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Sealing: Viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for Viton). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket TEMA STANDARD (NORDIC RANGE) with a shut-off valve and an eliminator and a BSP female thread. socket has additional O-ring which makes it suitable for gas installations. It also has a ring to prevent accidental disconnection. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Sealing: Viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for Viton). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug NITTO KOHKI HSP series CUPLA with a BSP female threadT. Manufactured in Japan from special alloy steel. It is characterized by excellent durability and resistance to vibration and pulsating pressure. Used, among others, in the hydraulic systems of foundry equipment, where sudden pressure changes occur. It can operate under vacuum. Application: power hydraulics (hydraulic oil). Material: nickel-plated steel. Sealing: NBR. Operating temperature: from -20°C to +80°C. Working pressure: up to 206 bar (depending on the quick-coupling sizes). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug CEJN 525 series (NORDIC RANGE) with a shut-off valve and a BSP female thread. is Intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Sealing: Viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for Viton). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug TEMA STANDARD (NORDIC RANGE) with a shut-off valve and an eliminator and a BSP and NPT female thread. Intended for heavy-duty operating conditions. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Sealing: Viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for Viton). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket TEMA with a BSP female thread, Compliant with the ISO 7241-1 B standard. socket (except for size 1/4" ) has additional a second O-ring, which makes it ideally suitable for gas installations. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). It is also available in a version with a static-pressure eliminator. interchangeable with quick coupling ISO-B from other manufacturers. Working pressure: up to 400 bar (depending on the quick-coupling size). Safety factor: 4:1. The stated working pressure applies to the connected quick coupling. Material: chrome-plated brass (for socket of sizes 1/4" ÷ 1/2"), carbon steel, galvanized (for socket of size 3/4" and 1"). Sealing: NBR (from -30°C to +100°C), Viton (from -25°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling plug with a shut-off valve and a BSP female thread. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called "euro couplings". interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing plug: NBR (Operating temperature from -25°C to +100°C). Working pressure: up to 350 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug SNAP-TITE with a BSP female thread American-made, without a valve. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Depending on the application, the appropriate coupling and seal material should be selected. Standard: MIL-C-51234. Working pressure: up to 155 bar (depending on the quick-coupling size), Safety factor 2:1. Material: brass. Sealing: NBR. Operating temperature: from -35°C to +120°C). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling plug type "flat-face" intended mainly for construction machinery, where large pressure surges occur. The plugs are also available in a version with a static-pressure eliminator. The quick coupling can be operated with one hand. Depending on the application, the appropriate seal material should be selected. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028, except for size 3/16". Application: power hydraulics (hydraulic oil), industrial. Material: steel with a zinc-nickel coating, except for size 3/16" coated with a zinc coating. Working pressure: up to 720 bar. Sealing: NBR (from -25°C to +100°C), Viton (from -15°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA seal set for a NORDIC RANGE socket. The set comprises 2 O-rings + a flat gasket; for size 3/16 the seal set consists of 1 O-ring. Material: NBR, Viton. Operating temperature: from -30°C to +100°C - NBR, from -20°C to +200°C - Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and a BSP female thread. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called "euro couplings". Used interchangeably with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing socket: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 350 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe TEMA quick-coupling socket with a BSP female thread, compliant with the ISO 16028 standard. The flat-face, leak-free IF series of quick couplings, thanks to the appropriate valve design in the socket and plug, is characterized by a low pressure drop, which ensures maximum economic efficiency. An additional advantage is the ability to operate the socket with one hand. It is equipped with a safety system that prevents accidental disconnection. Application: power hydraulics (hydraulic oil), chemical industry (chemicals). It is also available in a version with a static-pressure eliminator. Interchangeable with ISO 16028 quick couplings from other manufacturers. Working pressure: up to 450 bar (depending on the quick-coupling size). Safety factor: 4:1. The stated working pressure applies to the connected quick coupling. Material: carbon steel, galvanized. Sealing: NBR (from -30°C to +100°C), viton (from -25°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic bulkhead quick-coupling socket with a shut-off valve and a metric male thread (DIN 2353). Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called "euro couplings". interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing socket: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket DIN type V with a valve poppet and a BSP female thread. Used mainly in agricultural machinery. quick coupling of size 1/2" is compatible with quick coupling to the standard ISO-A index HQ-IA12-F-08G. Material: galvanized steel. Operating temperature: from -25°C to +100°C. Sealing: NBR. Working pressure: up to 375 bar (depending on the quick-coupling size). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve, a BSP female thread and a pressure eliminator. A "push-pull" version - automatic disconnection upon accidental pulling of the line. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called "euro couplings". interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing socket: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and a BSP female thread. A "push-pull" version - automatic disconnection upon accidental pulling of the line. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called "euro couplings". interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing socket: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. The flow is given at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket HANSEN type HK with a female thread. Compliant with the ISO 7241-1 B standard. Alternatively, they can be connected with quick coupling ISO-B from other manufacturers. Sockets in sizes up to 1" have a second O-ring instead of a support ring. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Thread: BSP, NPT. Material: brass. Sealing: NBR, EPDM. Operating temperature: from -54°C to +149°C (depending on the type of seal). Working pressure: up to 207 bar (depending on the quick-coupling size). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HANSEN type HK quick-coupling socket with a BSP and NPT female thread. Compliant with the ISO 7241-1 B standard, interchangeable with quick coupling ISO-B from other manufacturers. Manufactured in accordance with the PED 2014/68/EU Pressure Equipment Directive. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). It is fitted with a self-sealing poppet valve, providing excellent sealing for both high and low pressure. For pulsating pressure with the coupling disconnected, the maximum working pressure should be reduced by 50%. Material: AISI 303. Sealing: NBR (Operating temperature from -40°C to +121°C), EPDM (Operating temperature from -54°C to +149°C), Viton (Operating temperature from -29°C to +204°C). Working pressure: up to 152 bar (depending on the quick-coupling size). The flow is given for a pressure drop of 3 bar.
