Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically resistant and flame-retardant hose designed for use in air conditioning, ventilation, and heating systems. For the extraction and transmission of hot air, chemically aggressive vapors, exhaust gases, and gases in ventilation and heating systems. It has resistance to UV, ozone, and weather conditions. Used in vehicle equipment, engines, and the chemical industry. Characterized by high compressibility - up to 1:6, strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for CSM (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material: externally black polyester fabric coated with CSM - Hypalon. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -35°C to +175°C (temporarily up to +190°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, and smooth interior hose with a white spiral, designed for the removal of dust, chips, fibers, and lightweight bulk materials in the paper, textile, and wood industries. It retains its flexibility and bendability even at low temperatures. The dense steel spiral coated with white PVC ensures high pressure parameters, is resistant to corrosion, and has good adhesion to the hose material. The hose has good resistance to abrasion, oils, and gasoline. Installation on couplings - with bridge clamps (right-handed). Other diameters available upon request. Versions: P1 N PU – standard with high abrasion resistance; P1 N PU AS – antistatic (R ≤ 108 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, resistant to microbes and hydrolysis; P1 N PU EL – electrically conductive (R ≤ 104 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in explosion hazard zones (after conducting a risk assessment). Hose material: transparent polyester-polyurethane (P1 N PU), transparent polyether-polyurethane (P1 N PU AS), black polyether-polyurethane (P1 N PU EL). Reinforcement: steel wire spiral coated with PVC. Wall thickness measured between the spiral: 0.5 mm and 0.6 mm from diameters of 100 mm. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, gray in color, very flexible and pliable, chemically resistant and flame-retardant hose intended for use in air conditioning, ventilation, and heating systems. It features high compressibility - up to 1:6, a strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Also available in other colors and with a stainless steel spiral (from a diameter of 80 mm). AS version – antistatic (R ≤109 Ω) - made in black. Hose installation on couplings with bridge clamps (left-handed). Chemical resistance check: PVC chemical resistance table (preliminary selection), confirmation of resistance and application conditions by Tubes International. Standard length: from 2 to 10 m - contact Tubes International. Hose material: gray polyester fabric impregnated with PVC. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, and elastic hose designed for the extraction of hot vapors, smoke, gases, dust, cooling air discharge, and blowing. Flame-retardant, resistant to temperature, UV radiation, ozone, and aging. Used in all areas of industry for high-temperature applications, including extraction from furnaces in the metallurgical industry, foundries, glass, and ceramic industries. Characterized by high compressibility, strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Other diameters available upon special request in the range of 50 to 508 mm. Hose installation on couplings with bridge clamps (left-handed). Standard length: 3 m (also available in lengths of 6 and 10 m upon special request). Hose material: glass fabric impregnated with silicone (silver-gray), with a thickness of 0.4 mm. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -60°C to +300°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-layer suction hose with a specific construction designed for the discharge of very hot (up to 1100°C) gases, vapors, smoke, and air. The outer layer of impregnated glass fabric with stainless steel threads provides mechanical strength, the middle thick high-temperature fabric serves as insulation, and the inner very fine stainless steel mesh separates the flow of hot gases. Flame retardant, resistant to hot sparks to some extent. Used with furnaces and engines for the extraction of very high-temperature gases in the metallurgical, ceramic, shipbuilding, aerospace, automotive, and military equipment industries. The hose has a strong construction and is resistant to damage due to the external spiral. Used exclusively as a suction hose operating under vacuum, due to the possibility of gas permeation outside under pressure (degassing). Hoses with a small internal diameter < 100 mm feature a so-called double-hose construction (the inner mesh layer constitutes a separate hose with a spiral). Hose installation on couplings with left-handed bridge clamps. Standard length: from 2 to 10 m - depending on the diameter. Hose material: 3 layers: externally impregnated glass fabric with stainless steel fibers (gray), middle layer - high-temperature insulating fabric, inside fine mesh - stainless steel. Reinforcement: external spiral made of wire and sheet metal from stainless steel. Operating temperature: from -50°C to +1100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible, and highly bendable hose designed for the discharge of chemically aggressive vapors and gases in all industrial sectors. Excellent chemical resistance, high temperature resistance. The hose features high compressibility and impact resistance due to the external spiral. Resistant to UV radiation, ozone, aging, weather conditions, and is flame-retardant. Other diameters available in the range of 50 ÷ 508 mm and a version with a stainless steel spiral. Hose installation on couplings with bridge clamps (left-handed). PTFE EL CL version - electrically conductive hose with resistance R ≤106 Ω, compliant with ATEX Directive 94/9/EC and standard TRBS 2153, made of black PTFE. Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: 3 or 6 m. Hose material: light brown glass fabric coated with Teflon (PTFE), thickness 0.12 mm - standard PTFE CL version, glass fabric coated with black conductive Teflon (PTFE), thickness 0.15 mm - antistatic PTFE EL CL version. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -150°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically and thermally resistant two-layer hose designed for the discharge of the most chemically aggressive vapors, gases, dust, and fibers (non-abrasive), and for the blowing of hot air. Very good chemical resistance to aggressive chemicals due to the internal layer of PTFE. In the standard version, the internal layer of white natural PTFE meets food industry requirements (FDA). In the antistatic version EL, the black internal layer of PTFE is electrically conductive (R ≤106 Ω). With an outer layer made of silicone-coated glass fabric and an inner layer of PTFE, the hose is resistant to temperatures up to 250ºC. The hose features high compressibility - up to 1:6, a strong construction resistant to vibrations, stretching, and tearing, and impact resistance due to the external spiral. Resistant to UV radiation, ozone, aging, weather conditions, and is flame-retardant. Used in the chemical industry, metallurgy, foundry, ceramics, and glass industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material inner layer: white PTFE Teflon film - standard version SILTEF, black conductive PTFE Teflon film - antistatic version SITEF EL. Hose material outer layer: silicone-coated glass fabric, silver-gray. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -50°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, and elastic hose designed for the extraction of hot fumes, gases, dust, exhaust gases, cooling air, and blowing. Used in all areas of industry for high-temperature applications, particularly in machine construction, vehicles, engine equipment, aerospace, and military applications. Resistant to temperature, flame-retardant, and very mechanically durable. Characterized by excellent compressibility, a very strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Other diameters available upon special request in the range of 50 to 508 mm. Hose installation on couplings with bridge clamps (left-handed). Standard length: 3 m (also available in lengths of 6 and 10 m upon special request). Hose material: aramid fiber fabric internally impregnated with silver-gray silicone, 0.4 mm thick, externally green-gray. Reinforcement: type CLIP - external spiral made of galvanized steel wire and sheet metal, left-handed. Operating temperature: from -60°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuite lightweight, flexible, and pliable, temperature-resistant two-layer suction hose designed for the discharge of vapors, smoke, and high-temperature air. Flame-retardant, resistant to hot sparks within a certain range. Used with furnaces and engines for the extraction of high-temperature gases in the metallurgical, ceramic, shipbuilding, aerospace, automotive, and military equipment industries. Characterized by high compressibility - up to 1:6, strong construction due to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used exclusively as a suction hose operating under vacuum, due to the possibility of gas permeation outside under pressure (degassing). Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layers of impregnated glass fabric with stainless steel fibers, gray. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -50°C to +650°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically resistant two-layer hose designed for the discharge of the most aggressive chemical vapors, gases, dust, and fibers (non-abrasive). Very good chemical resistance to aggressive chemicals due to the internal layer of PTFE film. In the standard version, the internal layer of white natural PTFE meets food industry requirements (FDA). In the antistatic version EL, the black internal layer of PTFE is electrically conductive (R ≤106 Ω). The hose features high compressibility - up to 1:6, a strong construction resistant to vibrations, stretching, and tearing, and impact resistance due to the external spiral. Resistant to UV radiation, ozone, and aging. Used in the chemical and food industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material internal layer: white PTFE Teflon film - standard version PETEF, black conductive PTFE Teflon film - antistatic version PETEF EL. Hose material external layer: polyethylene fabric coated with polyethylene (PE). Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for the removal of dust, wood shavings, chips, and lightweight abrasive bulk materials. Used in the woodworking, construction, and food industries. Ozone resistant. Wall thickness is measured between the spiral. Other diameters available in the range of 30 ÷ 400 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated steel wire spiral. Operating temperature: from -40°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and pliable, chemically resistant hose designed for the discharge of aggressive chemical vapors, gases, dust, and fibers. Mainly used in the chemical industry and, among others, in asbestos removal. Very good chemical resistance to solvents and other aggressive vapors. Resistant to hydrolysis and biological corrosion. Free from halogen compounds and plasticizers. Characterized by high compressibility - up to 1:8, strong construction, and impact resistance due to the external spiral. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material: polyethylene fabric coated with polyethylene (PE). Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyurethane hose, reinforced with a steel wire spiral, designed for the discharge and transport of bulk materials, powders, and sawdust. Ozone resistant. Hose material: transparent polyurethane. Reinforcement: galvanized steel wire spiral. Operating temperature: from -40°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, with a thick wall and thick spiral, flexible hose designed for vacuum extraction and transport of abrasive materials such as sand, gravel, and grain. Suitable for all types of industries, particularly used for loading and unloading silos, vehicles, and suction excavators, as well as transloading from tankers, etc. The thick wall and very dense reinforcing spiral provide high resistance to vacuum. Smooth on the inside, non-compressible, not overly flexible but elastic, even at low temperatures. Excellent abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. The wall thickness of the hose is measured between the spirals. Other diameters may be available upon special request. The ECO 2.0 and ECO 2.5 hoses, regardless of their thickness, differ in construction and consequently in parameters. The ECO 2.0, due to its dense spiral, has greater resistance to vacuum but is less flexible, while the ECO 2.5, with a larger spiral pitch, is more flexible and elastic, especially in larger diameters. The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials sourced from recycling clean waste from the production process, renewable energy, closed water cycles, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between spirals: 2.0 mm (ECO 2.0), 2.5 mm (ECO 2.5). Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically and thermally resistant two-layer hose designed for the discharge and transfer of the most chemically aggressive vapors, gases, dust, and fibers (non-abrasive), as well as for the blowing of hot air. Very good chemical resistance to aggressive chemicals due to the internal layer of PTFE. In the standard version, the internal layer of white natural PTFE meets food industry requirements (FDA). In the antistatic version EL, the black internal layer of PTFE is electrically conductive (R ≤106 Ω). The hose features high compressibility - up to 1:6, a strong construction resistant to vibrations, stretching, and tearing, and impact resistance due to the external spiral. Resistant to UV radiation, ozone, and aging. Used in the chemical, petrochemical, and food industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material internal layer: white PTFE film - standard version HYTEF, black conductive PTFE film - antistatic version HYTEF EL. Hose material external layer: black polyethylene fabric coated with CSM rubber. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -35°C to +175°C (temporarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically resistant hose designed for the extraction and transfer of aggressive chemical vapors from solvents, paints, hydrocarbons, chemicals, etc. Thanks to the conductive FKM rubber, it has antistatic properties (surface resistance R <106 Ω). Very good resistance to oil, aromatic substances, most acids, and chemicals. Excellent resistance to elevated temperatures. Resistant to UV radiation and ozone. Characterized by high compressibility - up to 1:6, strong construction resistant to vibrations and stretching, impact resistance due to the external spiral. Used in the paint, chemical, and paper industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for FKM (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material: polyester fabric coated with FKM, antistatic, externally black. Reinforcement: external spiral made of steel sheet and wire. Operating temperature: from -25°C to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight and with excellent flexibility, the hose is designed for the discharge of oil vapors, dust, and light bulk materials. Resistant to microorganisms and hydrolysis. Compliant with FDA requirements and European Directives. Hose material: transparent polyether-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose designed for suction and transport of abrasive materials: sand, gravel, debris, leaves, and other contaminants. Intended for use in street, square, and road cleaning. Used in sweepers and other municipal and road service equipment. The special design of the P7 M STREET hose ensures that despite its large wall thickness (1.4 mm), it has a smaller bending radius (1.2 x D) than standard hoses of this thickness. The folds of the hose between the spiral at the bend turn outward, reducing flow resistance and wear. Flexible, low-compressible, smooth inside, and elastic even at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Wall thickness is measured between the spiral. Installation on fittings with bridge clamps (right-handed). Other diameters may be available upon special request. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
