Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBIT series MR regulator. Basic version for regulating compressed air pressure in a pneumatic system. Pressure gauge connection: 1/8" BSP. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar, or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure piston-type pressure reducing valve with manometer, used for regulating working pressure and ensuring proper operation in the connected installation, regardless of changing medium consumption. Size: DN20. Housing material: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: from -10°C to +90°C. Connection: BSP 1" female thread. Manometer dial diameter: Ø63. Flow rate: 5000 l/min (at input pressure of 20 bar Δp = 4 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPiston-type REG pressure reducing valve, characterized by resistance to harsh working conditions, intended for the NEW DEAL series. Possibility of wall mounting using holes in the body. Size: 1/4", 3/8", 1/2", 3/4", 1". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2", 3/4", 1". Pressure gauge connection: BSP female thread 1/8" for valves up to 1/2" (above - BSP female thread 1/4"). Flow rate: 650 l/min - 1/4", 2500 l/min - 3/8", 1/2", 4500 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with a piston-type pressure regulator from the NEW DEAL series, featuring a high degree of reliability, intended for compressed air systems or in close proximity to actuating devices. Wall mounting capability via holes in the housing. Size: 1/4", 3/8", 1/2". Output pressure range: 0 to 8, 0 to 12 bar. Supply pressure: up to 18 bar, for drain RA up to 10 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2". Pressure gauge connection: BSP female thread 1/8". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 700 l/min - 1/4", 2500 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filter regulator) series SYNTESI®, without end connections, is a device consisting of a filter and a pressure reducing valve. It is built from the same components as the filter and regulator, thus it has the same technical characteristics. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: BSP 1/8" ÷ 3/8" for SY1 and BSP 3/8" ÷ 1" for SY2. Additional connection for pressure gauge or fittings: BSP 1/8" for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator series BIT with shaped membrane, recommended for decentralized compressed air systems or in direct proximity to actuating devices. Size: 1/8", 1/4". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: G 1/8" BSP, G 1/4" BSP. Manometer connection: G 1/8" BSP. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 600 l/min - 1/8", 1/4" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFR + L series NEW DEAL set with a high degree of reliability for heavy working conditions, featuring a piston-type reducer. It is characterized by stable set pressure under variable supply pressure, micrometric oil dosing adjustment proportional to air flow, guaranteed operation at low flow rates. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for discharge RA up to 10 bar. Operating temperature: up to +50°C. Connection: BSP 1/4", 3/8", 1/2". Pressure gauge connection: BSP 1/8". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 500 l/min - 1/4", 2200 l/min - 3/8", 1/2" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter - GAFR series GA pressure regulator with internal BSP thread is used to remove contaminants contained in compressed air to ensure the proper operation of pneumatic system components, while the manually adjustable regulator maintains a constant pressure value at the outlet, regardless of fluctuations in supply pressure. The package includes a mounting bracket/holder and a pressure gauge. GA connection sets (L, T, U shapes) are used to connect individual components together. Size: 200, 300, 400, 600. Filtration degree: 40 µm. Supply pressure: up to 10 bar. Operating temperature: from -5°C to +70°C. Connection: BSP female thread 1/8" to 1". Condensate drain: automatic (A). Flow rate: 1050 l/min - size 200, 2250 l/min - size 300, 4000 l/min - size 400, 6500 l/min - size 600 (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® series FIL filter, without end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 400. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar, depending on the type of drain. Operating temperature: up to +50°C. Connection: BSP 1" ÷ 2". Condensate drain: manual / semi-automatic (RMSA), automatic (RA).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filtroregulator) series SYNTESI®, with end connections 1/8", 1/4", 3/8", 1/2", 3/4", 1", is a device consisting of a filter and a pressure reducing valve. It is built from the same components as the filter and regulator, thus it has the same technical characteristics. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10°C to +50°C. Connection: BSP female thread 1/8" ÷ 3/8" for SY1 and BSP female thread 3/8" ÷ 1" for SY2. Additional connection for pressure gauge or fittings: BSP female thread 1/8" for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SYNTESI® series, without end connections, is used to regulate working pressure and ensures proper operation in the connected installation, regardless of the changing consumption of the medium. The valve uses a shaped diaphragm instead of a flat diaphragm, which provides higher nominal flow values due to greater diaphragm travel, increased sensitivity and response speed to setting changes, thanks to reduced static and kinetic friction of components, and greater accuracy in maintaining the set outlet pressure with changes in flow and supply pressure. In the event of an increase in outlet pressure above the set value, the diaphragm opens the drain valve and vents the reducer until the pressure value matches the setting. The push-lock mechanism allows the knob to be locked in any position by pressing it. The locking plate enables the installation of a padlock to prevent unauthorized changes to the outlet pressure setting. Additional connections at the front and back of size 1/8” can be used to connect a pressure gauge, pneumatic-electric relay, or plug couplings. The air drawn from these connections is reduced. Size: SY1, SY2. Outlet pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10°C to +50°C. Connection: BSP female thread 1/8" ÷ 3/8" for SY1 and BSP female thread 3/8" ÷ 1" for SY2. Additional connection for pressure gauge or couplings: BSP female thread 1/8" for SY1 and 1/4" for SY2. Flow: 1200 l/min - 1/8", 2800 l/min - 1/4", 3350 l/min - 3/8" (SY1), 5300 l/min - 3/8" (SY2), 7400 l/min - 1/2", 7600 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGAR series GA regulator with internal BSP thread, manually adjustable, maintains a constant pressure value at the outlet, regardless of fluctuations in pressure before the valve. The package includes a mounting bracket and a pressure gauge. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: from -20°C to +70°C. Connection: BSP 1/8" to 1". Flow rate: 1400 l/min - size 200, 2100 l/min - size 300, 5000 l/min - size 400, 6800 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FR+L set is a combination of a filter-reducer and a lubricator. The filter-reducer consists of a standard air filter and a pressure reducing valve housed in one casing. The filter's task is to separate heavier fractions of air contaminants using centrifugal force, while the pressure reducing valve, thanks to the shaped diaphragm, ensures maximum sensitivity and precision of adjustment. It has additional connections at the front and back for connecting a manometer or fittings for reduced pressure. The lubricator is the most widely used solution for ensuring proper lubrication of actuating devices in pneumatic systems. It also features auxiliary connections on its rear and front surfaces for connecting a manometer, pressure sensor, or for additional air intake. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1, up to 13 bar for SY2, up to 10 bar for the RA drain. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Filtration degree: 5 µm, 20 µm, 50 µm. Oil tank capacity: 60 cm³ - SY1, 130 cm³ - SY2. Additional connection for manometer or fittings: BSP 1/8" for SY1 and 1/4" for SY2. Condensate drain: manual/semi-automatic (RMSA), automatic (RA). Flow rate: 1400 l/min - SY1, 4000 l/min - SY2, (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filter regulator) FR, SKILLAIR® series, without end plates, is a device consisting of a filter and a pressure reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size and type of discharge. Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Pressure gauge connection: BSP 1/8". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1600 l/min - series 100, 3000 l/min - series 200, 5600 l/min - series 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRA regulator series BIT. Version used for pressure regulation in water installations, without secondary venting. Pressure gauge connection: GW 1/8" BSP. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNEW DEAL series lubricator with BSP thread connection ensures proper lubrication of devices with oil mist in pneumatic installations and is characterized by high dosing stability. Supply pressure: up to 18 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FIL NEW DEAL series filter is recommended for decentralized compressed air systems or in close proximity to actuating devices. Due to its construction (metal structure), it is characterized by resistance to harsh working conditions. Designed for use at higher pressures. Size: 1/4", 3/8", 1/2", 3/4", 1". Filtration degree: 4 µm, 20 µm, 50 µm. Supply pressure: up to 18 bar, for drain RA up to 10 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2", 3/4", 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1700 l/min - 1/4", 4100 l/min - 3/8", 1/2", 11000 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SYNTESI® series, with end connections 1/8" to 1", is used for regulating operating pressure and maintaining it at a constant level, ensuring proper operation in the connected installation, regardless of the changing consumption of the medium. The valve uses a shaped diaphragm instead of a flat diaphragm, which provides higher nominal flow values due to greater diaphragm travel, as well as increased sensitivity and response speed to setting changes by reducing static and kinetic friction of components and greater accuracy in maintaining the set output pressure with changes in flow and supply pressure. In the event of an increase in output pressure above the set value, the diaphragm opens the drain valve and vents the reducer until the pressure value matches the setting. The push-lock mechanism allows the knob to be locked in any position by pressing it. The locking plate enables the installation of a padlock to prevent unauthorized changes to the output pressure setting. Additional connections at the front and back can be used to connect a pressure gauge, pneumatic-electric relay, or plug couplings. Air drawn from these connections is reduced. Size: SY1, SY2. Output pressure range: 0 to 2, 0 to 4, 0 to 8, 0 to 12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: from -10°C to +50°C. Connection: BSP thread 1/8" to 1". Additional connection for pressure gauge or couplings: BSP thread 1/8" for size SY1, BSP thread 1/4" for size SY2. Flow: 1200 l/min - 1/8", 2800 l/min - 1/4", 3350 l/min - 3/8" (SY1), 5300 l/min - 3/8" (SY2), 7400 l/min - 1/2", 7600 l/min - 3/4" and 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filter regulator) FR, SKILLAIR® series, is a device consisting of a filter and a pressure reducing valve. It reduces and purifies the air supplied by the compressor. Size: 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 13 bar, depending on the type of discharge. Operating temperature: up to +50°C. Connection: BSP 1/2" to 1". Pressure gauge connection: BSP 1/8". Condensate discharge: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: 5600 l/min at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic condensate drain series NEW DEAL. Working pressure: 10 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompressed air lubricator series BIT with BSP thread connection ensures proper lubrication of devices in pneumatic installations with oil mist and is characterized by high oiling stability. Particularly recommended for operation at low flow rates. Size: 1/8", 1/4". Tank capacity: 26.5 cm³. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: BSP 1/8", 1/4". Flow rate: 710 l/min - 1/8", 1/4" (at input pressure of 6 bar and Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V with lock, SKILLAIR® series, without end plates. Its purpose is to separate the working circuit from the supply air. It is a normally closed, three-way valve. In the closed position, it cuts off the supply air while simultaneously venting the system, making it particularly useful during maintenance work. In the resting position (closed), it can be locked with a padlock, which secures the valve from being activated by unauthorized personnel. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Nominal flow: depending on size up to 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe precise filter DEP series SYNTESI®, without end connections, is used to remove liquid or solid contaminants from compressed air with high accuracy. High filtration accuracy is achieved by using a special filtering element called a "coalescing cartridge." Size: SY1, SY2. Filtration degree: 0.01 µm - air purity class according to ISO 8573-1: 1-7-2. Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: from -10°C to +50°C. Condensate drain: manual / semi-automatic (RMSA). Recommended flow: 460 l/min - size SY1, 620 l/min - size SY2 (at a pressure of 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series BIT recommended for decentralized compressed air systems or in direct proximity to actuators. Size: 1/8", 1/4". Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1200 l/min - 1/8", 1/4" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V series SYNTESI®, without end connections, is used to separate the working system from the supply air. It is a three-way, two-position, normally closed valve. In the closed position, it cuts off the supply air and vents the system, making it particularly useful for maintenance work. It has a system allowing for the installation of two padlocks of size SY1 or three padlocks of size SY2 with a diameter of 3 mm. Alternatively, a version with a Ø 7 hole for a single padlock is available. On the rear and front surfaces of the valve, there are auxiliary connections (1/8” for size SY1 and 1/4” for size SY2) for connecting a pressure gauge, pressure sensor, or for additional air intake. Size: SY1, SY2. Connection: BSP thread 1/8", 1/4", at the front and rear. Supply pressure: up to 15 bar, depending on size. Operating temperature: from -10°C to +50°C. Nominal flow: up to 4000 l/min, depending on size (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic-electric relay 2A NO/NC 2 MT (version with two-meter hose). Supply pressure: up to 15 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini SDR series G pressure reducer with internal BSP thread, manually adjustable, maintains a constant output pressure regardless of fluctuations in inlet pressure. The package includes a mounting bracket and a pressure gauge. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP female M5 ÷ 1/4". Flow rate: 150 l/min - size 100, 500 l/min - size 200 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGAL series GA lubricator with internal BSP thread ensures proper lubrication of devices with oil mist in pneumatic installations. The package includes a mounting bracket/holder. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: from -5°C to +70°C. Connection: BSP 1/8" to 1". Flow rate: 2750 l/min - size 200, 5000 l/min - size 300, 8800 l/min - size 400, 14500 l/min - size 600 (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FIL filter series SYNTESI® without end connections is used for removing solid and liquid contaminants from the air produced by the compressor. Size: SY1, SY2. Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Additional connection for pressure gauge or fittings: BSP 1/8" for SY1 and 1/4" for SY2. Condensate drain: manual/semi-automatic (RMSA), automatic float (RA). Flow rate: 1300 l/min - 1/8", 1650 l/min - 1/4", 1750 l/min - 3/8" (SY1), 4500 l/min - 3/8" (SY2), 5200 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulator MR SR, series BIT. Version used when rapid venting of the pneumatic system is required after a drop in supply pressure. The SR reducer should be installed between the actuating valve and the point of use. Pressure gauge connection: GW 1/8" BSP. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar, or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SKILLAIR® series, without end plates, is used to regulate working pressure, ensuring proper operation of the device. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - series 300). Operating temperature: up to +50°C. Connection: BSP female thread 1/4" ÷ 1". Pressure gauge connection: BSP female thread 1/8". Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at input pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFR + L series BIT set with shaped membrane. It is characterized by high flow value with reduced pressure drop, high degree of condensate separation, and the ability to operate at low flow rates. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLubricator series SYNTESI®, without end connections, ensures proper lubrication of devices in pneumatic installations with oil mist. Standard version (STD), oil filling through the oil refill plug. Size: SY1, SY2. Tank capacity: 60 cm³ - SY1, 130 cm³ - SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Flow rate: 1600 l/min - 1/8", 3000 l/min - 1/4", 3650 l/min - 3/8", 6100 l/min - 1/2", 3/4", 1" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SKILLAIR® series, with end plates, is used to regulate working pressure, ensuring proper operation of the device. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Pressure gauge connection: BSP 1/8". Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVFR + L series NEW DEAL set with a high degree of reliability featuring a piston-type pressure reducing valve, consists of a shut-off valve, air filter, pressure reducing valve, and lubricator. It is designed for operation in harsh conditions, ensuring stability of the set pressure with variable supply pressure and functioning at low flow rates. The V3V valve allows for quick aeration and venting of the system. Connection: BSP thread 1/4", 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for discharge RA up to 10 bar. Output pressure range: 0÷8, 0÷12 bar. Filtration degree: 4 µm, 20 µm, 50 µm. Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Pressure gauge connection: BSP thread 1/8". Operating temperature: up to +50°C. Nominal flow: 480 l/min - 1/4", 1900 l/min - 3/8", 1/2" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GAF filter series GA with BSP internal thread is used for removing contaminants contained in compressed air to ensure the proper operation of pneumatic system components. The package includes a mounting bracket. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Filtration degree: 40 µm. Supply pressure: up to 10 bar. Operating temperature: from -5°C to +70°C. Connection: BSP 1/8" to 1". Condensate drain: automatic (A). Flow rate: 1700 l/min - size 200, 3000 l/min - size 300, 4500 l/min - size 400, 10500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filter regulator) FR, SKILLAIR® series, is a device consisting of a filter and a pressure reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on the size. Operating temperature: up to +50°C. Connection: BSP 1/4" to 1/2". Pressure gauge connection: BSP 1/8". Condensate drain: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: up to 3000 l/min at an inlet pressure of 6 bar (Δp = 1 bar), depending on the size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKILLAIR® D series filter, without end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 100, 200, 300. Filtration degree: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and type of drain. Operating temperature: up to +50°C. Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min - size 100, 360 l/min - size 200, 500 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAC series SYNTESI® activated carbon filter, without end connections, is used for purifying compressed air from oil residues, solvents, and odors. Purification occurs as air flows through the porous granulate of activated carbon with high pollutant absorption. This is the most effective air purification method used in industrial pneumatic installations. The efficiency and lifespan of the filter element can be increased by preceding it with a fine filter (0.01µm) and a pre-filter (5µm). Size: SY1, SY2. Oil residue at 20°C: 0.003 mg/m³ – air purity class according to ISO 8573-1: 1-7-1 (with a pressure drop not exceeding 75 mbar). Filter element lifespan: 4000 hours (with a pressure drop not exceeding 75 mbar). Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: from -10°C to +50°C. Condensate drain: manual / semi-automatic (RMSA). Recommended flow: 350 l/min - size SY1, 800 l/min - size SY2 (at a pressure of 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® series lubricator, without end plates, ensures proper lubrication of devices in pneumatic installations with an oil mist. Size: 100, 200, 300. Tank capacity: 50 cm³ - size 100, 95 cm³ - size 200, 160 cm³ - size 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Flow rate: 1500 l/min - size 100, 3700 l/min - size 200, 5500 l/min - size 300 (at an inlet pressure of 6 bar and Δp = 1 bar). Oil filling methods: STD - standard version, filling through tank disassembly or plug, CA - automatic filling, replenishment only during the lubricator's operation, CD - vacuum filling, pressure drop inside the tank allows for filling, CAML - automatic filling with a minimum level, CDML - vacuum filling with a minimum level.
