Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 95°. Available in natural and blue. Hose material: polyurethane PUR. Working pressure: from 8 bar to 12 bar (depending on the diameter hose). Operating temperature: od -40°C up to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, breaking and kinking spiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 14 bar (depending on the diameter hose). Operating temperature: od -40°C up to +75°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProduced with high quality raw based on ether, retaining through long period time flexibility, hose spiral, giving for use in difficult conditions industrial. has memory shape, thanks to which po many years use Diameter coil remains unchanged. excellent for applications in applications, which require use hoses resistant to abrasion, brittleness and unfavourable conditions atmospheric. equipped in coupling swivel allowing on elimination stresses longitudinal hoses, during ich use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting fitted in quick coupling and plug type 26KA, of spring reinforcing. length working is 80-90% total length line. Hose material: light-blue polyurethane PUR. Working pressure: up to 12 bar (depending on the diameter hose). Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible and at the same time light hose polyamide, intended for installations pneumatic, oil, fuel, hydraulic, resistant to chemicals and greases. It has a calibrated outer diameter, allowing the use of push-in fittings, which significantly shortens and simplifies its assembly. compliant with the standard DIN 73378. Available in colours: yellow, orange, red, blue, green, natural and black. Hose material: polyamide PA 12 (nylon). Working pressure: from 16 bar to 49 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -55°C up to +100°C (for media based on water +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose o calibrated diameter outer, intended for installations pneumatic, hydraulic, oil, fuel, lubrication and chemicals. resistant to action water and oiled air. hose o elevated resistance, acc. to standards DIN 73378 (P-plasticised, H-stable thermally, L-resistant to action radii UV). standards and requirements: compliant with standards DIN 74324, concerning pneumatic systems brake vehicles road and with DIN 73378, concerning hoses polyamide used in vehicles road. When working at an elevated temperature, the pressure drop with temperature must be taken into account. Available in colours: natural, black, blue, green, red and yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 12 bar to 44 bar (depending on the diameter and wall thickness wall hose). working pressure depends on temperature. Operating temperature: od -40°C up to +80°C (for media based on water +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. Terminated on both sides with a straight section and ends with a male BSPT thread. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 11/12 (nylon). Working pressure: up to 27 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHighly flexible and resilient hose polyurethane, having optimal properties mechanical and very high strength on compression in wide the scope temperatures. The calibrated outer diameter and wall thickness allow the use of easy-to-use push-in fittings from leading manufacturers. Resistant to abrasion, solvents, fuels, hydrocarbons. used in pneumatic and hydraulic systems, tool lines and industrial robots, etc.. Hardness per Shore (A): 90°. Available in colour natural, black, blue, green, red and yellow. Hose material: polyurethane PUR. Working pressure: from 9 bar to 14.3 bar, depending on the diameter hose. Operating temperature: od -40°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, breaking and kinking spiral, reinforced hose intended specially for workshops automotive, for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT. Hardness per Shore (A): 98°. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 15 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for air, water and other media. resistant to chemicals, safe physiologically, free of taste. Meets BGA and FDA requirements. Available in colour natural, black and blue. Hose material: polyethylene LDPE. Working pressure: from 5 bar to 17 bar, depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine - hose spiral polyamide intended for all kinds equipment pneumatic, systems control, etc. Terminated on both sides with a straight section and ends with a male BSPT thread. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCutter for hoses plastic o diameters in the scope 3 ÷ 12 mm. color: orange.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. compliant with the standard DIN 73378. Available in colours: natural, blue. Hose material: polyamide PA 12 (nylon). Working pressure: from 11 bar to 40 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -10°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, bursting and kinking spiral hose intended for installations pneumatic automotive systems brake. resistant to oil, gasoline, ozone and radiation UV. retains high flexibility at low temperatures. terminated on both sides fitting with a thread external metric. The stated total length is the maximum hose length after stretching. Available in colour yellow and red. Hose material: polyurethane. Material springs: steel galvanised. The permissible Working pressure: 10 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA blade spare for shears PZG28 (ZC-PZG28).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose o excellent resistance temperature and strength on elevated pressure made of special, non-flammable polymer. has calibrated diameter external. Material is resistant to aging and action radiation UV, characterised good properties sliding co counteracts abrasion material. Material impermeable for gases, resistant to action greater concentrated bases and acids inorganic, organic, alcohols and solvents in elevated temperatures. has properties electrical-insulating. calibrated Diameter outer allows connection with plugs or couplings leading manufacturers. accuracy dimensional ensures constant strength on compression even for hoses with greater diameter makes, that is suitable for wider range practical applications. Hose material: polyfluoride vinylidene PVDF. Working pressure: from 16 bar to 80 bar (depending on the diameter hose). Operating temperature: od -50°C up to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyurethane hose spiral intended for pneumatic systems control, tools hand, robots industrial, etc. resistant to abrasion, breaking and kinking, with success used also in industry automotive. its high flexibility maintained is even po many years use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT (without springs for diameter outer 16 mm). The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 17 bar (depending on the diameter hose). Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBar mounting for hoses pneumatic. facilitates and speeds up design installations, reduces space installation, increases resistance to vibration. color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose used in systems, in which available frequent contact with water (high resistance to microorganisms and hydrolysis), detergents, solvents. Retains flexibility at low temperatures, is resistant to abrasion and kinking. The calibrated outer diameter allows use with push-in connectors. Hardness per Shore (A): 98°. Meets FDA requirements. Available in colour natural, black, blue, green, red. Hose material: polyether-polyurethane. pressure working: from 16 bar to 24 bar, depending on the diameter hose. Operating temperature: od -40°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible in wide the scope temperatures hose spiral, resistant to abrasion, sparks welding and hot chips metal. intended for pneumatic systems control, tools hand, robots industrial, etc. resistant to radiation UV and aging. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT. Hardness per Shore (A): 98°. The stated total length is the maximum hose length after stretching. Hose material: flame-retardant polyurethane PUR. Working pressure: up to 13 bar (depending on the diameter hose). Operating temperature: od -40°C up to +70°C. standards: UL 94 VO (Layer outer). color black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA blade spare for cutter TC15 (SH-TC15).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for air, water and other media. is characterized flame retardancy and resistance on sparks welding, hot chips metal. resistant to hydrolysis, corrosion biological, radiation UV, solvents and detergents. withstands vacuum 0.9 bar. The calibrated outer diameter allows use with push-in connectors. Hose material: flame-retardant polyurethane PUR. Working pressure: 20 bar. Operating temperature: od -35°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBar mounting for hoses pneumatic. facilitates and speeds up design installations, reduces space installation, increases resistance to vibration. Operating temperature: od 0°C up to +40°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on the diameter hose). Operating temperature: od -10°C up to +80°C. standard: DIN 73378.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose o calibrated diameter outer, intended specially for installations pneumatic automotive systems brake. Not contains plasticisers, not stiffens and is resistant to radiation UV. Available only in black. standard: ISO 7628 : 2010 (category 1). Hose material: thermoplastic elastomer (TPE) based on polyester. Working pressure: 10 bar. Operating temperature: od -40°C for + 100°C (for media based on water +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose for air, gases, water and other media. used in systems in which available danger accumulation charges electric and in zones hazard explosion. compliant with the directive ATEX (2014/34/UE). resistance surface R 6 Ω. resistant to hydrolysis, microorganisms, abrasion and radiation UV. The calibrated outer diameter allows use with push-in connectors. recommended for applications in industry electronic, painting powder, zones hazard explosion, mining, conveyors and sorters parts. pressure working given at factor safety 2:1 relative to maximum pressure not causing damage hose. Hose material: antistatic polyurethane PUR. Working pressure: from 9 bar to 16 bar (depending on the diameter hose). Operating temperature: od -30°C up to +80°C. Vacuum: for 0.95 bar (at vacuum should increase radius bends o 20%).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. Available in colours: natural, black, blue, red, yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 19 bar to 28 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -40°C up to +80°C (for media based on water +70°C). standard: SAE J 844 (diameter od 1/8" for 5/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. especially recommended for industrial or automotive installations hot liquids (fuels, oils, agents refrigerant) or air, not containing water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C for + 150°C (for media based on water +70°C). standard: DIN 73378, ISO 7628.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose pneumatic with polyethylene and aluminum for use in pneumatic systems control. very good resistance chemical layer outer allows on operation in environment aggressive chemical. Reinforcement in the molds aluminum coating increases strength hose co allows on assembly long sections without additional brackets. additional its advantage is possession tak called memory shape, enabling assembly in hard reachable places. can work buried without needs use additional covers. thanks to unique design, hose is about 5 times lighter od standard hoses pneumatic. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible double hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on the diameter hose). Operating temperature: od -40°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral protecting FLAMEX PS.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-hose in outer cover with black polyurethane, intended for installations pneumatic, hydraulic, oil, fuel, lubrication and chemicals. various color hoses enable easy identification individual circuits supply or various media. amount hoses: 2. Hose material: polyamide PA 12 (nylon). Working pressure: from 7.5 bar to 33 bar (in dependence od diameter and wall thickness wall hose). Operating temperature: od -20°C up to +80°C (for liquids containing water up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShears PZP12 or PZG28 for cutting hoses and pipes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCutter for hoses plastic o diameters in the scope 3 ÷ 15 mm. color: black. Material blade: steel stainless.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bar for parallel mounting of lines of various diameters. Material: resin acetal. color black. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA blade spare for shears PZP12 (ZC-PZP12).
