Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection for a pressure gauge with an inch BSP or NPTF female thread, bulkhead type, and the ISO 15171-2 standard M16x2 male thread on the measuring end. The connection is available in two variants: with free flow and with a pressure-surge damper. Material: steel with zinc-nickel coating. Working pressure: 630 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlanged connection 90° with a compact design, featuring a flange with a pitch diameter of holes from 30 mm to 55 mm, with internal BSP connection thread. Used in hydraulic pump connections. Standardly equipped with a set of screws, washers, and an O-ring. Material: aluminum. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection 90° SAE 3000 of compact design with a 24° DIN 2353 socket for a metric tube for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Available as: L (light series), S (heavy series). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection 90° SAE 3000 of compact design with BSP female thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection 90° SAE 3000 of compact design with BSP male thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection 90° SAE 3000 of compact design with a weld-on socket for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection 90° SAE 6000 of compact design with a weld-on socket for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection SAE 3000 of compact design with a weld-on socket for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection SAE 3000 of compact design with a weld-on socket for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection SAE 6000 of compact design with BSP male thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection SAE 6000 of compact design with a weld-on socket for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection for a pressure gauge with a female thread and an end intended for microhoses, complete with a ferrule. The connection is available in two variants: with a swivel nut (with a metric and BSPT thread, NBR O-ring seal) and with a fixed nut (with an NPTF and BSPT thread). Material: steel with zinc-nickel coating. Working pressure: 500 bar or 630 bar – depending on hose size. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection for a pressure gauge with an inch BSP or NPTF female thread and the ISO 15171-2 standard M16x2 female thread on the measuring end. The connection is available in two variants: with free flow and with a pressure-surge damper. Material: steel with zinc-nickel coating. Working pressure: 630 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric connection ISO 12151-2, 24° cone, with an O-ring and a nut, 90° angled, with a measuring hose end. The connection is available as L (light series) and S (heavy series), while the end is intended for DN2 or DN4 hoses and supplied complete with a ferrule. Material: steel with zinc-nickel coating. Working pressure: from 250 bar to 630 bar – depending on size. Sealing: NBR O-ring. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric connection ISO 12151-2, 24° cone, with an O-ring and a nut, straight, with a measuring hose end. The connection is available as L (light series) and S (heavy series), while the end is intended for DN2 or DN4 hoses and supplied complete with a ferrule. Material: steel with zinc-nickel coating. Working pressure: from 250 bar to 630 bar – depending on size. Sealing: NBR O-ring. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement connection with a 5/8" BSF female thread (standard typical for JCB machines) and an end intended for 2x5 mm microhoses. Also included is a plug with a male thread on a steel lanyard. Material: carbon steel, galvanized. Working pressure: 420 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details5/8" BSF measurement connection, British type HSP, JCB standard, with a metal cap and a BSP male thread, for connection to a hydraulic system. The connection is equipped with a ball valve. Material: carbon steel, galvanized. Sealing: NBR. Working pressure: 420 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsM16x2 measurement connection with a metal cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection to the hydraulic system with a JIC (7/16"-20 UNF, 37° cone) or metric (M16x2) male thread. Material: steel with zinc-nickel coating. Working pressure: from 450 bar to 630 bar – depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsM16x1.5 measurement connection (military standard) with a metal cap and a BSP male thread for connection to a hydraulic system. Material: steel with zinc-nickel coating. Sealing: NBR. Working pressure: 630 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsM16x2 measurement connection with a metal or plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection to the hydraulic system per DIN 2353, 24° cone, heavy series S. Material: steel with zinc-nickel coating. Working pressure: 630 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsM16x2 measurement connection with a metal or plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and appropriate connections for connection to the hydraulic system with BSP male and female threads (60° cone). Material: steel with zinc-nickel coating. Working pressure: from 345 bar to 400 bar – depending on size. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsM16x2 measurement connection with a metal or plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection to the hydraulic system with a JIC (UNF, 37° cone) or BSP (60° cone) female thread. Material: steel with zinc-nickel coating. Working pressure: from 450 bar to 630 bar – depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe measurement coupling is designed according to the requirements of ISO 15171-2. Used primarily for pressure diagnostics in power hydraulic systems, it can also be used for lubrication, venting, oil sampling and micro-hydraulics. Intended for hydraulic oil and mineral oils, made of carbon steel with a zinc-nickel coating, with NBR seals. Available with a metal cap or a plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection to the hydraulic system per DIN 2353, 24° cone, O-ring. Available as L (light series) and S (heavy series), with a type A captive nut or a type B loose nut. Material: steel with zinc-nickel coating. Working pressure: from 100 bar to 630 bar – depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe measurement coupling is designed according to the requirements of ISO 15171-2. Used primarily for pressure diagnostics in power hydraulic systems, it can also be used for lubrication, venting, oil sampling and micro-hydraulics. Intended for hydraulic oil and mineral oils, made of carbon steel with a zinc-nickel coating, with NBR seals. Available with a metal cap or a plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and appropriate connections to the hydraulic system per DIN 2353 for pipes, 24° cone, nuts and cutting rings. Available as L (light series) and S (heavy series). Material: steel with zinc-nickel coating. Working pressure: from 100 bar to 630 bar – depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with a plastic cap).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement connection with an M16x2 (ISO 1517-2), M16x1.5 or S12.65x1.5 female thread and a measuring hose end, supplied complete with a ferrule. Material: steel with zinc-nickel coating or AISI 316 steel. Working pressure: 500 bar or 630 bar – depending on size. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connection with a metric, BSP, JIC or ORFS female thread, with a swivel nut and a measuring hose end, supplied complete with a ferrule. Material: steel with zinc-nickel coating or AISI 316 steel. Working pressure: from 400 bar to 630 bar – depending on size. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled tube connection, for connection using a ring and a DIN 2353 nut, with an end intended for a measuring hose. The connection is available as L (light series) and S (heavy series), while the end is intended for DN2 or DN4 hoses and supplied complete with a ferrule. Working pressure depends on the connection mounted on the tube and the working pressure of the hose. Material: steel with zinc-nickel coating.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube connection, for connection using a ring and a DIN 2353 nut, with an end intended for a measuring hose. The connection is available as L (light series) and S (heavy series), while the end is intended for DN2 or DN4 hoses and supplied complete with a ferrule. Working pressure depends on the connection mounted on the tube and the working pressure of the hose. Material: steel with zinc-nickel coating.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with internal thread 11/16″-18 UNF allowing connection to socket type 2-HG and 2-HL Hansen Beverage quick coupling. On the other side, finished with internal or external thread. Working pressure: 15 bar. Operating temperature: up to +130°C. Material: AISI 303 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded connection 9/16″-18 UNF allowing connection to the type 2KGF plug of Hansen Beverage quick coupling. On the other side, finished with internal or external thread. Working pressure: 15 bar. Operating temperature: up to +130°C. Material: AISI 303 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connection with a BSP, NPTF male thread and a measuring hose end, supplied complete with a ferrule. Available in three variants: with a BSP male thread (60° cone), with a BSP male thread (flat sealing) or with an NPTF male thread (tapered). Material: steel with zinc-nickel coating. Working pressure: 400 bar and 630 bar – depending on size. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with an external BSP or metric threaded stub for connecting plastic hoses (for polyurethane hoses, a minimum hardness according to Shore (A) 98° is required). Material: nickel-plated brass. Operating temperature: from -15°C to +130°C. Working pressure: 30 bar. Sealing: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "L" tee with external BSPT thread type AI 13230 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 14 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 fitting for welding, type ASF: 24° cone with NBR o-ring; under nut DIN 2353 type M. Available as: L (light series), S (heavy series). Material: oiled steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric tube fitting for welding type LET-LOK® intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tube (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting socket SKV with BSP male thread (DIN 3852 type E sealing – elastomer gasket with a rectangular cross-section) for use in hydraulic systems. Material: steel galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC37° fitting with external thread, for tubing. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° elbow fitting JIC 37° with external BSPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° angle fitting ORFS with external metric thread (O-ring seal with washer), type WE-MG. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° angle fitting ORFS with external NPTF thread (seal on the thread - with Teflon tape or anaerobic sealant), type WE-NT. Material: carbon steel, galvanized.
