Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). By pushing the fitting into the coupling, we obtain the ability to connect to the installation with an external thread. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature RML type pressure reducing valve (plug-in connection at the inlet and outlet of the valve) designed to reduce higher pressure to lower pressure downstream of the valve. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUM type nut with metric or BSP thread, similar to DIN 3870, for S and SF type fittings. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnreinforced and highly flexible transparent PVC hose intended for non-pressurized (or very low-pressure) transfer of water, beer, wine, alcohols with a concentration of up to 20%, juices, beverages, and other food liquids. Not recommended for milk and dairy products, as well as oils and fatty food substances. Also used for liquids in general industrial applications, for light chemicals (e.g., diluted acids and bases), and as a protective cover for pipes, conduits, hoses, etc. For the hose, the stated pressure value is an indicative value of the recommended working pressure, assumed for a typical PVC hose, with a safety factor of 5:1. The use of the hose for a specific working pressure should be preceded by testing under working conditions. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Working pressure: low, up to several bar, depending on temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlastic hose cutter for diameters ranging from 3 to 12 mm. Color: orange.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 double clamp type 301 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. In addition to standard metal components, extended plates, rails, and screws for assembling clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: green polypropylene. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting bracket for panel installation for FM 632 type pressure gauges with rear connection.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible steel braid, used to protect hoses from mechanical damage, abrasion, and temperature. It also increases their strength under elevated pressure. It can be clamped with a hose clamp or sleeves. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsB11 locking ring for connecting copper pipes and plastic hoses to type B fittings. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P20 CS press is powered by a 1.6 kW electric motor with a voltage of 12 V or a 2.2 kW motor with a voltage of 24 V, supplied from a battery, specifically designed for equipping service vehicles and technical wagons. The clamp diameter is adjustable using a micrometric knob. The achievement of the clamp diameter is indicated electrically via an LED indicator. The press is available in two versions where the clamping head can be positioned on the right or left side. All FINN-POWER clamping presses are adapted for use with interchangeable jaw sets (ordered separately). For example, for a clamp diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 should be ordered.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWidely used for washing floors and industrial equipment with hot water. Also suitable for outdoor use. Resistant to weather conditions and abrasion. Not resistant to oil, not recommended for air with oil mist. Compared to the "Tubes 2116," it has a thicker wall. Inner layer: white EPDM rubber. Reinforcement: polyester braid. Outer layer: red or blue micro-perforated EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle fitting with external BSPT thread type AI 13280 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO screw with O-rings type D7 for couplings type R28, R29. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-vulcanizing silicone tape PYROSIL used for sealing the PYROJACKET cover and PYROTAPE. It does not have an adhesive layer, but when overlapping itself or on PYROJACKET or PYROTAPE, it vulcanizes in a few seconds. Resistant to radiant heat, moisture, and vibrations. Due to its very good dielectric strength, it is suitable as an electrical insulator. A 50% overlap and a clean, dry surface are recommended during installation. Not recommended for contact with flames and splashes of molten metal. Material: silicone in rust color. Operating temperature: up to +246°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality "T" branch connection with external BSPT thread, made entirely of AISI 316L steel, series 60210. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlow tee, series F type R 5 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-coated through a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by the FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP threaded tee for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring seal, type F.3, designed for the FERRARI connector socket. Material: SBR/NR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfile gasket for TW (tank truck) connection type GSD (for 4" connection, O-ring gasket type TWO is used). Material: hypalon (SCM). Temperature range (approximate): from -20°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCreamy, flexible chemical hose with a multi-layer construction designed specifically to combine chemical resistance with high longevity in peristaltic pumps. Smooth inner layer with very good chemical resistance, free of plasticizers, resistant to acids, bases, salts, alcohols, and ketones, with low absorption and adsorption of water-based fluids. Outer layer made of thermoplastic elastomer (Norprene®) provides excellent properties and high longevity when used in peristaltic pumps. The hose meets hygiene requirements and is suitable for food contact: US FDA 21 CFR 177.1520 and is resistant to most cleaning and disinfecting agents. Sterilization by steam, ethylene oxide, or radiation. Ideal for dosing soap and detergents, laundry detergents, and dishwashing liquids. Used for the production and dosing of various chemicals in all sectors of industry. Full hose roll length is 15 m. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: polyolefin / TPE (Norprene® - thermoplastic elastomer). Operating temperature: from -60°C to +74°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Enhanced hose lifespan compared to the standard confirmed by a test of 1,000,000 impulse cycles. Outer layer is flame-resistant (MSHA). Standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 250 bar to 420 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Reinforced version of the SILICONE 1 hose, featuring two layers of fabric coated with silicone and a steel spiral placed between the layers. Chemically resistant, UV resistant, and aging resistant. Used, among others, for gas extraction in the metallurgical industry, foundries, glass and ceramic industries, for hot air in industrial dryers, in printing houses and paper mills, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding fumes. Smooth inside (when straightened), with a very small bending radius allowing easy installation in tight spaces of equipment and vehicles. Not recommended for continuous dynamic bending. Installation with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: two layers of glass fabric coated with red silicone. Reinforcement: steel wire spiral, double external fiberglass cord. Operating temperature: from -70°C to +250°C (temporarily up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Compliant with DIN 73378 standard. Available in colors: natural, blue. Hose material: polyamide PA 12 (nylon). Working pressure: from 11 bar to 40 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, crack-resistant, and kink-resistant spiral hose designed for pneumatic installations in automotive braking systems. Resistant to oil, gasoline, ozone, and UV radiation. Maintains high flexibility at low temperatures. Finished on both ends with external metric threaded fittings. The stated total length is the maximum length of the hose when stretched. Available in yellow and red. Hose material: polyurethane. Spring material: galvanized steel. Maximum working pressure: 10 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose with a smooth inner surface designed for compressed air, water, light chemicals, fungicides, fertilizers, and pesticides. Commonly used in agriculture for spraying, irrigation, and applications. The outer layer is resistant to abrasion and weather conditions. Inner layer: black PVC. Reinforcement: polyester braid (double polyester braid for REFITTEX 80 BAR version). Outer layer: black PVC. Working pressure at 20°C: 20 bar (white stripe), 40 bar (blue stripe), 80 bar for internal diameter 13 mm, above 50 bar (red stripe). As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble welding hose for oxygen and acetylene. Manufactured according to ISO 3821 standard. Inner layer: black synthetic rubber. Reinforcement: double polyester braid. Outer layer: smooth synthetic rubber in red (acetylene) and blue (oxygen). Working pressure: 20 bar. Operating temperature: from -32°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe unbraided version TO (Tube Only) of the VISIFLON hose, made of high-quality spiral corrugated PTFE (right-handed), provides exceptional flexibility, elasticity, and vibration resistance among Teflon hoses. The VISIFLON TO hose can be used for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, and detergents under very low pressure conditions. The standard version of VISIFLON TO is made of natural, translucent PTFE, allowing for visual flow control. The antistatic version VISIFLON TO AS made of carbon-infused Teflon (black) ensures the dissipation and dispersion of electric charges for substances and conditions at risk of static electricity. The hose material meets FDA requirements (21 CFR 177.1550 for VISIFLON TO, 21 CFR 178.3297 for VISIFLON TO AS). It is flame-retardant (UL94 V-0) and has a high oxygen index (LOI). Hose assembly requires straightening the corrugations along the length of the tail of the fitting, performed on special equipment. The fittings can then be installed by crimping with stainless steel ferrules. The working pressure value for the unbraided VISIFLON Teflon hose applies only up to a temperature of 100°C, and in the case of vacuum, up to a temperature of 80°C. Above these temperatures, there is a decrease in working pressure and vacuum. If the hose is to be used above these temperatures, this must be taken into account, and appropriate tests should be conducted under operating conditions. Hose material: spiral corrugated PTFE (Teflon). Operating temperature: from -70°C to +100°C (up to +230°C). Working pressure: from 2 bar to 4 bar - depending on the hose diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The heavy-duty HW version is recommended for harsher working conditions, gases (up to 100 bar), and applications where cyclic temperature changes occur. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a 4:1 factor is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for hose AF-HWSB-06 is: 260 bar – (170°C-130°C) x 0.75 = 260 bar – 30% = 182 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 55 bar to 240 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed specifically for the transfer of AdBlue® (AUS32, DEF) - 32.5% aqueous urea solution. The inner layer of the hose consists of black, smooth, antistatic (R‹10^6 Ω/m) EPDM rubber vulcanized without sulfur. The inner layer of the hose is free from contaminants such as aluminum, calcium, chlorine, copper, iron, potassium, magnesium, sodium, nickel, and zinc, ensuring the highest purity of the medium in accordance with ISO 22241-2. This is particularly important in the automotive industry, where AdBlue® acts as a reductant to decompose harmful nitrogen oxides in the SCR catalyst. Its use allows compliance with European emission standards EURO 4, 5, and 6. For AdBlue® to be effective, it must be very pure, necessitating the use of specialized hoses, tanks, and fittings that are resistant to AdBlue® and do not contaminate it. Ends and fittings for AdBlue® should be made of stainless steel or suitable plastic. Besides automotive applications, the hose is also used in the chemical industry, for example, in the production of nitrogen fertilizers. Inner layer: black EPDM rubber. Reinforcement: synthetic braid. Outer layer: black EPDM rubber. Working pressure: 10 bar or 20 bar. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for conveying saturated steam, with good resistance to high temperature, abrasion, and ozone. Available on request, hose according to standard EN ISO 6134:2005 type 1 class A. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: synthetic cord. Outer layer: black EPDM rubber. Working pressure: 6 bar. Operating temperature: from -40°C to +165°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug NiTO made of AISI 316L stainless steel with internal BSP thread. Available in two systems: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., a 1/2″ socket with a 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong two-bolt clamp with double band and joint closure for heavy loads. Two screws and full pins ensure a precise and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band with a width of 20 mm and 24 mm. The rolled edges of the bridges prevent damage to the hose surface. The clamp features markings on the band for minimum and maximum diameter as well as material. Tightening of screws is done using an Allen key. All components are made of AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe UPS crimping press is designed for crimping textile-reinforced hoses with EC-type ferrules using a manual lever. It is standardly equipped with two sets (of 8 crimping segments each) of jaws. The working range for the internal diameter of the crimped hoses for the UPS-3 press: DN 3 ÷ 8 (range of internal diameters of EC ferrules: 8 ÷ 17 mm), DN 10 ÷ 16 (range of internal diameters of EC ferrules: 18 ÷ 28 mm). An additional base with index EC-100250 can be purchased for the press.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality three-way ball valve "L" type BK3L with internal NPT thread, designed for high-pressure hydraulic installations. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVM45 relief valve limiting maximum oil pressure in hydraulic systems. Allows free flow of fluid between P connections. When pressure exceeds the set value, the T path opens and excess oil drains to the tank. The opening pressure value is set using a screw (adjustment with an Allen key, locked with a locking nut). The valve is equipped with mounting holes. Body material: aluminum. Valve material: galvanized steel. Sealing: NBR. Maximum operating pressure: 260 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection set for the SYNTESI system type SY1 or SY2. The set includes a coupling and 4 screws.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector on both sides with internal trapezoidal thread compliant with DIN EN 12713 standard. The trapezoidal threads, which are standardly equipped in IBC connectors, are 100% compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint AK with internal BSP thread and external BSP thread designed for installation in industrial guns, particularly in wash guns at the hose connection point, where rotation is required due to the operation of the gun. Material: AISI 316 steel. Working pressure: up to 30 bar. Sealing: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO socket connector for use in hydraulic systems for mining. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight PUSH-IN connector for hose with external BSPT or metric thread. For use in lubrication technology. The recommended material for connected hoses is polyamide. Body material: nickel-plated brass. Sealing material: o-ring (HNBR). Operating temperature: from -30°C to +150°C. Maximum working pressure: 150 bar (for liquids), 30 bar (for air).
