Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling with internal thread type C2 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with plug connections for hoses with metric diameter, series S, type PUCM. Economic solution for connecting flexible pneumatic hoses with calibrated external metric diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe balancer without automatic locking is designed to relieve hand tools, power tools, etc., to improve work comfort. By means of spring lift, it neutralizes the weight of the suspended tool, enhancing safety and ergonomics. The spring lift is adjustable using a knob located on the body. The balancer's lift should be adjusted to the weight of the suspended tool. Housing material: cast aluminum. Cable material: stainless steel. Cable length: 1600 mm. Cable thickness: 2 mm. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details22 mm coil for PIV.I valves, shaft O8. Insulation class: F155. Voltage tolerance: -10% to +10%. Protection degree: IP65 EN60529 with connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHPA screw socket of hydraulic quick couplings designed for installations with very high pressures, where there are significant mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Can be connected/disconnected when there is residual pressure in the system. End caps must be ordered separately. Material: carbon steel. Sealing: NBR. Flow: 1/4" - 16.4 l/min; (Δp=4 bar), 3/8" - 21.3 l/min; (Δp = 4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (connected coupling), 3/8" - 1850 bar (connected coupling), 1/4" - 1800 bar (disconnected socket), 3/8" - 1850 bar (disconnected socket). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO SC quick coupling socket, with disconnection protection, with hose end. For use with hot water (above +60°C) in installation areas where it is used directly by the operator and frequently disconnected. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +150°C. Sealing: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket with valve and seal with external thread UNF 11/16″-18. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK C connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe safety clamp is used to secure the connected joint (plug with SKV socket) during maneuvering or transferring connected hoses before their disconnection. Diameter D - outer diameter. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo fitting designed for soldering onto metric pipes made of carbon steel. The fitting has a hole D matched to the outer diameter of the pipe. Version with banjo hole F matched to a screw with inch thread. Material of the fittings: raw carbon steel (without galvanizing). For the selection of soldering material and soldering technique, please contact Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose end with external BSP thread for use in industrial installations, e.g., for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK SAE 6000 flange end, O-ring seal or other gasket in the flange groove, for hose types 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight non-skive flange end SAE 6000 (SFS), heavy series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSA type end fitting with external BSP thread, 60° cone sealing, designed for low-pressure rubber and non-reinforced plastic hoses as well as those with textile reinforcement, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air installations, etc. Material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType CNP end with external tapered BSPT thread made of AISI 316 steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClosing screw with external BSP thread type A7 with hexagon socket head. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). By pushing the fitting into the coupling, we obtain the possibility of connecting to the installation with an internal thread. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini double-acting cylinder ISO 6432 STD, type 112 with magnet, without cushioning. It is designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance activities. The cylinder is made with a stainless steel sleeve. The dimensions of the outer covers for certain diameters have been reduced, allowing for the installation of cylinders in constrained and limited spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but only as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 8, 10, 12, 16, 20, and 25 mm. Stroke length: from 5 to 500 mm. Operating pressure: from 0.8 to 10 bar (Ø 8, 10, 12 mm); from 0.6 to 10 bar (Ø 16, 20, 25 mm). Sealing: polyurethane, NBR, FKM/FPM. Operating temperature: from -10°C to +150°C depending on the seal used.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNPT, BSPT, BSP threaded coupling and reducing coupling with NPT thread, intended for pipe connections mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric threaded nut intended for mounting DIN 3015 clamp standard type 100/101 and double DIN 3015 clamp type 201 on ABINS rail. Material: zinc-aluminum alloy.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRailway nut HEAVY DUTY with seal, with metric thread, for hook wrench. Material: aluminum. Sealing: NBR. Working pressure: 6 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction nipple made of stainless steel type 62020 with external BSPT thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm drive equipped with a spring for compensating dimensional changes in the connection (shrinkage of the hose due to cold flow of the material or due to large temperature fluctuations). The spring consists of a set of 10 disc springs (washer springs) – washers under the head of the screw. This ensures the maintenance of the clamp's grip and sealing around the entire circumference of the hose, preventing leaks from the installation. The spring mechanism of the clamp allows for automatic adjustment of its diameter while maintaining the clamp's grip. Particularly recommended in cases of large temperature changes for heavier applications. Proper clamping of the clamp is indicated by the screw end protruding beyond the housing of the lock and the flattened disc springs. The internal insert of the clamp protects the hose surface from damage. Installation tightening torque 8.5 Nm (max. 14.1 Nm). Screw/lock material: stainless steel 410. Band material: stainless steel 300. Band width: 16 mm (5/8").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFE SLEEVE cover made of dense fabric designed to protect hoses or bundles of hydraulic and pneumatic lines. Excellent abrasion resistance (tested according to SFS-EN ISO 12947-3), chemically resistant and UV resistant, low electrical conductivity. The cover protects people nearby from a bursting hose. Complies with EN ISO 3457 and EN 12999 standards. The attribute tape width specifies the width of the cover in a flat state. Material: black polypropylene (without printing). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong glass fabric coated on both sides with rust-colored silicone, with a weight of 1085 g/m². Primarily used as a welding shield, as well as in outdoor applications and in the offshore industry, due to its resistance to moisture and sunlight. Material: glass fabric coated with silicone. Operating temperature: from -54°C to +260°C (temporarily up to +1185°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpare blade for scissors PZG28 (ZC-PZG28).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure water gun SG28 for industrial applications. Outlet part finished with 1/4" BSP internal thread. The gun is also available with a swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 250 bar. Maximum pressure: 280 bar. Flow rate: 30 l/min. Operating temperature: up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gun for air, water, and non-explosive fluids. Designed mainly for blowing out contaminants, including in hard-to-reach places. Characterized by high blowing force, with adjustable flow size. Lightweight construction, ergonomic shape of the gun, and low trigger pull force ensure high work comfort. The gun is standardly equipped with a socket with a 1/4" BSP or 1/4" NPT thread. This model is available with a 90 mm bent nozzle, which is non-replaceable. Material: POM (body), brass (valve). Sealing: NBR. Working pressure: 16 bar. Burst pressure: 64 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAKBO HEAVY DUTY water gun, equipped with a beam adjustment screw. Not intended for steam. Body material: brass. Pusher material: stainless steel. Trigger, handle, and body of the gun are rubberized (EPDM), providing better insulation. Connection: GW 1/2" BSP. Working pressure: 24 bar. Flow rate: 75 l/min. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P20 HP hydraulic press with manual pump drive is suitable for use where there is no access to electricity or compressed air, and its compact design and low weight allow for repairs at the site of failure. It features a mechanical indicator (control pins) for achieving the clamping diameter and the ability to set the head in two positions (90° rotation). It is intended for repair workshops, service points, and technical vehicles. All FINN-POWER clamping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a clamping diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 must be ordered.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, flexible, four-braid high-pressure hose, primarily used for tensioning screws, water cutting, lifts, wrenches, and other hydraulic devices. The hose is pressure tested and supplied with the appropriate certificate. It meets the EN 1829-2 standard. Inner layer: POM (polyoxymethylene). Reinforcement: four braids of high-strength steel wire. Outer layer: PA (polyamide). Fittings and sleeve material: carbon steel, galvanized. Working pressure: up to 1800 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "T" fitting with internal BSPT thread type AI 13240 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 18 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble BANJO screw with washer type D8 for couplings type R13, R14, D12, D17, D5, D6. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew fitting with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Sealing of the fitting cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-type inline plug connector, type R5, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfile gasket for TW (tank truck) connection type GSD (for 4" connection, O-ring gasket type TWO is used). Material: viton (FPM). Temperature range (approximate): from -20°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong hose designed for oxygen lances in the metallurgical industry. The outer layer is self-extinguishing and made according to ASTM C 542 standard. Inner layer: black CR rubber. Reinforcement: double textile cord, fiberglass spacer. Outer layer: yellow or blue CR rubber. Working pressure: 30 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible PVC hose reinforced with double polyester braid designed for washing under medium pressure with cold and hot water as well as light chemicals in the food industry. It features exceptional temperature resistance - up to +70° at a working pressure of 40 bar. Compliant with European requirements for food substances 1935/2004 CE and 2007/19/CE (simulated fluids A, B, C). Use crimped fittings for THERMOCLEAN hoses. Inner layer: gray, smooth PVC. Reinforcement: double polyester cord. Outer layer: blue PVC. Working pressure: 80 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium thickness, flexible hose designed for the removal of dust, wood shavings, chips, cuttings, lightweight bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial fields. Compliant with DIN 26057 Type 2. Antistatic and flame-retardant, ensuring high workplace safety. Less flexible and compressible than SMARTFLEX® 0.4 and 0.6, but smooth inside, flexible even at low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Free from halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal direction of medium flow is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ωm, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – according to DIN 4102 class B1. Hose material: transparent polyester-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transfer of food substances, requiring the use of odorless and tasteless rubber. It contains no phthalates or bisphenol A. Thanks to the steel spiral reinforcement, it has good resistance to vacuum. Suitable for milk and its derivatives, as well as wine, beer, and fruit juices. Not recommended for oils and fatty food substances. Widely used in the food industry. The outer layer of the hose is resistant to abrasion and weather conditions. Standards and requirements: Food industry, contact with food: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI cat. 2. Inner layer: white natural rubber (NR). Reinforcement: synthetic cord, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: from -25°C to +80°C.
