Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA FERRARI lever coupling socket with fitting for hose, type F.7, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: rubber NR-SBR. Operating temperature: from -20°C to +50°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 90° NON SKIVE with metric female thread, with 24° cone sealing, O-ring (DKOS 90), series heavy, intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight INTERLOCK with metric female thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Hose fitting, NiTO type B with a BSPT male thread. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled body of the BANJO coupling with a push-on connection, type D5, intended for hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. The angled body of the BANJO coupling allows the coupling to be set in the desired position. Through-bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector CND karbowany intended for rubber hoses and industrial plastic hoses made of galvanized steel. Intended for assembly by means of bands or clamps. For repeated assembly and disassembly. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Angled connector type AI 13260 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal pressure gauge industrial 63 mm with connection rear FM 632, produced in accordance with the standard EN 837-1 in housing of steel stainless with filling glycerine. pressure gauge resistant is on shocks, vibration, moisture, o elevated resistance to sudden rises pressure, intended for straight measurements pressure liquids o low viscosity, vapours and gases, not operating corrosion on alloys copper and not crystallising. filling pressure gauge glycerine promotes reduction fluctuations indicator and reduction wear parts moving mechanism at pulsations pressure and vibration. also prevents condensation and formation atmosphere corrosion inside pressure gauge, which could damage parts internal. range measuring should select appropriate for pressure use, tak to pressure fixed or slowly changing not exceed 75% range; pressure pulsating not exceed 60% range and pulses pressure not exceeded maximum range. Diameter disc: 63 mm. Material: housing - steel AISI 304, sight glass - plexiglas, Connection - brass, mechanism - brass and alloys copper, filling - glycerine. Class accuracy: 1.6. temperature ambient: od -40°C up to +65°C. temperature medium: maximum +60°C. Connection rear: 1/4" BSP male (G 1/4 B, EN ISO 228-1, B means tolerance thread).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal gauge mounted to regulators of the types SYNTESI, BIT, SKILLAIR and NEW DEAL with dial square. The measuring range should be selected appropriately to the working pressure so that it does not exceed 75% of the maximum range. The scale is expressed in bars and PSI. Size: 1/8". Operating temperature: up to +50°C. diameter dial: 40x40 mm. Measuring range: 0 ÷ 4 or 0 ÷ 12 bar. Material housing: plastic. Material dial: aluminum. Filling: none (dry gauge).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket made of stainless steel, type 62300, with BSP female thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 101 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. For dimension group 0 there is one bolt with a hexagonal head, for dimension groups 1 ÷ 6 there are two bolts with a hexagonal head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp according to DIN 20039 B, with hooks ("claws") and separate inserts – pressure "tongues", made of high-quality galvanized ductile cast iron (with yellow passivation free of hexavalent chromium). Intended for securing a hose, with a coupling whose hose part has a safety lock. Indices marked with the letters "FL" at the end are intended for flat hoses. Material: galvanized ductile cast iron. With correct installation and an appropriately selected hose and fitting, working pressure up to 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp intended for securing hoses on standard (smooth) fittings with a safety flange. Material: clamp – aluminum, screws and nuts – galvanized carbon steel. Working pressure: 25 bar (with an appropriately selected hose and EN 14420-3 fitting).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp equipped in rubber a gasket on hose for mounting with a cable protecting system STOPFLEX®. clamp not is equipped in cable, which should order separately.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel ring sealing o cross-section octagonal type R intended for connecting and sealing specially machined flanges with groove. ring o cross-section octagonal ensures greater tightness connections than ring o cross-section oval. used in connections for high pressures and temperatures. detailed information on about dimensions ring found in switching on. Material: steel carbon. Working pressure: up to 700 bar. Operating temperature: od -40°C up to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality aluminum compressed-air gun, intended for removing all contamination from surfaces: liquids, fine chips, filings, etc.. Flow adjustment by the degree of lever press. Made of forged aluminum, protected by anodizing, ensuring high strength, durability and corrosion resistance. can be used for water. It works perfectly even in difficult working conditions. A gun equipped is in standard nozzle o diameter hole 1.5 mm, with a thread connection external M12x1.25. Instead of the standard nozzle, other nozzles can be mounted – see accessories for EWO guns. depending on connections we distinguish A gun terminated a plug EUROSTANDARD 7.2 or fitting for hose o diameter 6 mm, 9 mm and 13 mm. Material: aluminum (forging). diameter hole nozzle: 1.5 mm. pressure Maximum: 10 bar. pressure operating: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun MULTICLEAN with regulation stream flow and a lever drain with protection. solid brass The design. especially recommended for machine tools CNC for coolant and for washing parts. standard in gun nozzle Ø 2 mm. Working pressure: up to 40 bar. Operating temperature: od +5°C up to +90°C. weight: ok. 1050 g.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun aluminum with nozzle swivel 360° Ø 3 mm, with regulation stream flow. uses vacuum for suction liquid o low viscosity of bowl. tank: plastic o poj. 0.7 l. Diameter nozzle: 3 mm. pressure maximum: 10 bar. pressure operating: 2÷6 bar. Operating temperature: od +5°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPress P16 APZ o pneumatic drive pump hydraulic Intended for workshops repair, points service, etc. drive pump hydraulic, connected is using hose, o length 4 metres. press adapted is for use with interchangeable sets jaws (ordered separately). has An electric (battery) indicator of reaching the crimping diameter. Dla range diameters crimp e.g. od 10 for 45 mm should order 8 sets jaws standard od FP-16-10 for FP-16-31, where largest diameter crimp obtained on jaws main, which range is 38 ÷ 45 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProduced with high quality raw based on ether, retaining through long period time flexibility, hose spiral, giving for use in difficult conditions industrial. has memory shape, thanks to which po many years use Diameter coil remains unchanged. excellent for applications in applications, which require use hoses resistant to abrasion, brittleness and unfavourable conditions atmospheric. equipped in coupling swivel allowing on elimination stresses longitudinal hoses, during ich use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting fitted in quick coupling and plug type 26KA, of spring reinforcing. length working is 80-90% total length line. Hose material: light-blue polyurethane PUR. Working pressure: up to 12 bar (depending on the diameter hose). Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsButton alloy with a lock VRM-065 R for valve VME. color: red. For mounting, the VME1-000 adapter is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 90° adjustable PUSH-IN for hose terminated a BSPT male thread or metric. Do use in technology lubrication. recommended material joined hoses is polyamide. Body material: brass nickel-plated. Material seal: O-ring (HNBR). Operating temperature: od -30°C up to +150°C. maximum Working pressure: 150 bar (for liquids), 30 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal cover of specially cleaned through heating and saturation special substances acrylic braid with fiber glass. Nie has loose, falling out fibers, well arranges and is relatively resistant na abrasion. can it expand and shrink o 25% adjusting for desired diameter. Material: fiber glass. Operating temperature: up to +538°C (momentarily up to +705°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRoller for bending pipes hydraulic metric o diameters external 6, 8, 10, 12, 14, 15, 16, 18, 20, 22, 25, 28, 30, 32, 35, 38 and 42 mm Intended for equipment: CM42, CMS42, C42, MINI CENTER and CENTER JUNIOR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless pipe precision metric with austenitic steel stainless cold-rolled. given pressure working is pressure theoretical acc. to EN 13480-3. compliant of standards: EN 10216-5 TC1, ASTM A213-AW, ASTM A269, PED 97/23/EC, NACE MR0175/ISO 15156. Material: EN 1.4435, ASTM TP 316L. dimensions and tolerances acc. to EN 10305-01. length standard tubes (one section): 6 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" with BSP female thread, type A11, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMINE SPIRAL+ to antistatic version cover PROTECTOR with addition components reducing flammability and possibility ignition, especially in use mining and machines used in mines. has approval MSHA IC-271 issued through Mine Safety and Health Administration as product flame-retardant, approved for use in mines. class flammability acc. to UL 94 V-0 (standard Safety flammability materials with plastics). Material: brown-gray polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSheet-metal ferrule type H used for crimping hoses onto fittings that do not have a lock joining the sleeve with the fitting. It can also be used on NiTO fittings and on quick-coupling fittings. Sheet-metal ferrules can be used to crimp low-pressure hoses (up to approx. 30 bar depending on the diameter), made of various materials, provided that the hose material is soft enough for this type of crimping. Above all, rubber hoses with textile reinforcement and PVC hoses. It is also possible to crimp hoses with a steel braid (e.g. PZ type hose). The internal diameter of the ferrule should be selected to match the external diameter of the hose, while ensuring that the hole diameter at the front of the ferrule matches the fitting used. Diameter D2 - internal diameter. Diameter D3 - hole diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType LDR, LD, LR ferrules are intended for crimping hygienic stainless steel fittings (with a serrated tail) type NH-xxK-xxx and fittings with a hose tail for an RS shell clamp, e.g., TW-KRS-xxx, NH-xxR-xxx, onto industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral – suction and delivery hoses). The ferrule should be selected taking into account the inner diameter Dw and outer diameter Dz of the hose. The ferrule length L may be slightly (a few mm) greater than the length of the fitting tail Lk. LR ferrules – only for fittings for a shell clamp, LD – only for fittings with a serrated tail, LDR – ferrules for both fitting types. Diameter D1 – outer diameter. Diameter D2 – inner diameter. Diameter D3 – lock diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft and flexible hose for applications laboratory and food. ideal for equipment analytical, condensers, incubators, desiccators, as lines for gases and drainage. Do products food and biopharmaceutical. used often also for cooling processors computers. glassy smoothed, free of pores surface inner prevents deposition and adhesion contamination inside hose and facilitates its cleaning. total repeatability parameters hose we all batches. can be used for pumps peristaltic, ale service life nie is large. hose free of is phthalates and BPA (bisphenol A). meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, 3-A, USP Class VI, Japanese #370/1959. possible sterilization steam, oxide ethylene or radiation. compliant with REACH and California Proposition 65 – nie contains substances hazardous and banned. Length of a full hose roll 15 m. Available version VACUUM o thicker walls for applications vacuum. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -46°C. Hardness: 56° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon type BARRIER (thick-walled) intended for automotive and industrial systems refrigerant and air-conditioning working based on freon R134a, R12, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to oil, abrasion and conditions atmospheric. standards: SAE J2064 type C Class II. Inner layer: black rubber CR, Layer nylon (PA). Reinforcement: two braids polyester. Outer layer: black EPDM rubber, micro-perforated. Working pressure: from 17 bar to 24 bar, depending on the diameter hose. Operating temperature: od -30°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose intended for washing cold and warm water and light chemicals. Layer outer resistant to fats animal and vegetable. recommended for use in industry food. compliant with the European requirements for substances food 1935/2004 CE and 2007/19/CE (simulant fluids A, B, C). use fittings crimped for hoses THERMOCLEAN. Inner layer: white, smooth PVC. Reinforcement: cord polyester. Outer layer: blue, smooth PVC. Working pressure: from 26 bar to 30 bar (depending on the diameter hose). Operating temperature: od -15°C up to +100°C (momentarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction – delivery hose, PVC intended for water and sewage. smooth wall inner, externally lightly Serrated. good resistance to external impacts and heavier conditions use. flexible in low temperatures. used in systems irrigation, tankers and vehicles sewage, for purification sewers and emptying septic tanks. Hose material: green PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 1.8 bar to 4.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PTFE hose with a steel braid and an external colourless polyurethane coating, intended for brake and hydraulic systems and suspensions. resistant to high temperature and aggressive substances chemical, liquid brake DOT3 and DOT4 (the outer surface is also resistant to the mentioned substances). The hose can be used in brake systems equipped with ABS - it reduces the pulsation effect. Made in accordance with the SAE J1401 standard. Inner layer: PTFE. Reinforcement: a single steel braid. Outer layer: polyurethane with high abrasion resistance. Working pressure: 210 bar. Operating temperature: od -40°C up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 2SN, ISO 1436-1 2SN/R2AT, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +125°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness hose flexible of spiral reinforcing, intended for extraction and conveying bulk materials abrasive, granulates, chips, offcuts etc. used in various branches industry, in particular often used for discharge particles solid in industry plastics, wood, materials construction and metal. pliable and flexible, also in low temperatures. smooth inside, little compressible. dense and thick steel spiral coated white PVC ensures high parameters pressure, is resistant to corrosion and has good adhesion for material hose. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. versions: P3 PU – version standard, with polyester – polyurethane, very resistant to abrasion; P3 PU AS – version antistatic (R ≤10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, with polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis; P3 PU EL – version conductive electrically (R ≤10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in zones hazard explosion po carrying out analysis risk, made with black polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P3 PU), transparent polyether-polyurethane (P3 PU AS), black polyether-polyurethane (P3 PU EL). Wall thickness measured between the spiral: 0.8 ÷ 1.5 mm (depending on the diameter hose). Reinforcement: spiral with wire steel coated white PVC. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible and at the same time light hose polyamide, intended for installations pneumatic, oil, fuel, hydraulic, resistant to chemicals and greases. It has a calibrated outer diameter, allowing the use of push-in fittings, which significantly shortens and simplifies its assembly. compliant with the standard DIN 73378. Available in colours: yellow, orange, red, blue, green, natural and black. Hose material: polyamide PA 12 (nylon). Working pressure: from 16 bar to 49 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -55°C up to +100°C (for media based on water +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose welding for oxygen made acc. to standards ISO 3821. is characterized resistance on kinking and action conditions atmospheric. Not recommended for gases generated based on fuels, oils and gas LPG. Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: blue smooth rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, light, very flexible hose suction-delivery, intended for applications general-industrial for water and light chemicals, other liquids (without fat, oils and hydrocarbons). It can be used also for air, vacuum conveying dusts and powders – In that case the abrasiveness and the possible problem of static electricity must be taken into account. It can be used (at temperatures up to +40°C) for liquid and semi-liquid products food such as juices, drinks, beer, wine, alcohols with a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. Reinforcement spiral with wire steel, embedded in wall with soft PVC, ensures good resistance to vacuum and kinking hose. transparent wall allows on easy visual control of the flow. As a hose reinforced only with a steel spiral (without a braid), it shows a certain elongation under pressure, which must be taken into account in use, especially at elevated temperatures. hose METALFLEX PVC complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP) and FDA CFR 21 175.300 and 175.1210. Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent, soft PVC. Reinforcement: galvanised steel spiral. Working pressure at a temperature of 20°C: from 1 bar to 9 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -10°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFree of braid version TO ( Tube Only ) hose HYPERLINE, externally spirally serrated (clockwise), a in center smooth. hose combines advantages flexible hose serrated and hose smooth o unobstructed notches flow. standard version made is with natural, semi-transparent PTFE, co allows visual control flow. version antistatic AS with PTFE with addition carbon (black) ensures discharge and dissipation charges electric for substances and conditions hazard electricity static. Material hose meets requirements FDA (21 CFR 177.1550 for hose standard, 21 CFR 178.3297 for antistatic). Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). can be used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents in conditions very low pressure. fitting can be mounted crimped ferrules tube of steel stainless. dependence pressure working od temperatures for hose PTFE HYPERLINE FX without braid, applies only for temperatures 150°C. above tej temperatures occurs drop pressure working and vacuum. assuming use hose above these temperatures should to take into account and carry out appropriate test in conditions use. available versions: standard and antistatic. Material hose: PTFE (teflon). temperature use: from -70°C to +150°C (up to +260°C - pressure working hose dependent od temperatures).
