Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE SB (HYDRAFLON) has layer inner made with high quality seamless PTFE ensuring minimal porosity, maximum flexibility and resistance na vibration. braid made is with treated thermally wire of steel stainless AISI 304 o strength 1700 MPa. used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water, itp. - as well as for classic high-pressure hydraulic oil installations. hose HYPERLINE SB is version hose SMOOTHBORE of wall o medium wall thickness and diameter internal adjusted for standard ends hydraulic; assembly using standard straight jaws clamping. W case when identified is hazard electricity static (danger formation and accumulation charges electric, should use hoses HYPERLINE SB, in version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE graphite) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. at temperature use above +130°C maximum pressure working should reduced o 0.75% na each 1°C rise temperatures. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. pressure working: from 80 bar to 350 bar - depending on diameter hose. temperature use: from -70°C to +260°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning and rinsing installations and machine in industry food steam water and hot water. Layer inner meets requirements FDA 21 CFR 177.2600 and BfR XXI kat.2. Layer outer resistant na fats vegetable and animal. hose high quality, commonly used for cleaning and rinsing hot water or steam installations and machine in industry food (np. dairies, industry meat). Note: nie should use hose simultaneously for water and steam water. For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. length standard rolls: 60 m (or 120 m - contact with Tubes International). Inner layer: white rubber butyl. Reinforcement: synthetic cord. Outer layer: blue rubber NBR/PVC. pressure working: 6 bar (10 bar - for water). factor safety: 10:1 (3:1 - for water). temperature use: from -30°C to +165°C (from -30°C to +95°C - for water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for equipment for pressure washing hot water. Layer inner resistant to detergents, Layer outer resistant to abrasion, oils, ozone and conditions atmospheric. standards: ISO 1307. Inner layer: black synthetic rubber. Reinforcement: a single steel braid or a double steel braid. Outer layer: black or blue synthetic rubber (micro-perforated). Working pressure: 250 bar or 400 bar, depending on type hose. Operating temperature: od -40°C up to +120°C or od -40°C up to +150°C, depending on type hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK A with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LAUX 42 lever coupling plug with a weld-on connection with wide application np.: for transferring and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pressure and vacuum pumps, for building temporary water and air installations in construction, mining and agriculture, and for irrigation systems. Material: steel AISI 316. Maximum Working pressure: 12.5 bar (for fluids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling plug with fitting rolled for hose with wide application, among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Working pressure: up to 10 bar (up to 8 bar – for size 216 mm).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong screw clamp with a hinged closure for heavy loads, featuring a durable construction and two solid pins. Recommended for tight connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band from 18 mm to 26 mm wide. The rolled edges of the band prevent damage to the hose surface on which the clamp works. The clamp is marked on the band with the minimum and maximum diameter and the material it is made of. Thanks to the hexagon screw head, commonly used tools such as open-end, socket and adjustable wrenches can be used. Material: all components made of galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCaps heat-shrink intended are for securing line po earlier cleaning. eliminate possibility re contamination line, which is problematic and has space in traditional methods (badly matched plastic plugs czy caps inserted or screwed-in for ends can leave particles resulting through shearing material a thread). caps heat-shrink not leave po itself no contaminants. until are on ends cleaned previously line we have guarantee, that is on still clean. removal such caps consists in on pulling black stripe (placed along caps) in direction fittings line. caps are single-use use and re ich use is impossible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValves VODE used in systems hydraulic as element controlling and locking movement actuator double-acting operation. enable gentle descent actuator under load. value pressure opening sets using bolts (setting a wrench Allen, lock a lock nut). value setting must be o 30% greater, than value pressure resulting with loads receiver. standard pressure opening valves check is 0.5 bar. valves equipped are in holes assembly. Material: steel galvanized (body), steel galvanized (valve). sealing: NBR. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve type RKH with a thread internal BSP, intended for high-pressure installations hydraulic and industrial. For the correct selection of a valve for media other than hydraulic oil and for high operating temperatures, please consult Tubes International. Material: steel stainless AISI 316Ti (body, ball, stem). Seals: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: from -40°C to +100°C (POM); from -200°C to +250°C (PTFE); from -20°C to +100°C (NBR); from -20°C to +200°C(FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure valve needle intended for mounting in installation or mounting panel. Characterized compact design o relatively high flow. version with stem control. each valve is factory tested. valve has special design, allowing on assembly panel without the need removal needle, thanks to this not loses warranty the manufacturer. Coupling material: steel AISI 316. Material stem: steel AISI 316. sealing valve: metal/metal (steel AISI 316). sealing gland: PTFE. Operating temperature: up to +230°C. Working pressure: up to 345 bar. Connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick exhaust valve type VSR L, terminated with push-in connections on both sides (hose - hose), with the exhaust silenced by a built-in silencer. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve FPM limits maximum pressure in system. allows free Flow rate liquids hydraulic between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. maximum value pressure sets using screws (setting a wrench Allen, lock a lock nut). should pay attention particularly attention, to not set value pressure larger than 250 bar (max. pressure use for body valve). Material: aluminum (body), steel galvanized (stem). sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPR intended for high-pressure installations hydraulic and industrial. It closes the flow of medium in one direction and opens free flow of medium in the opposite direction. standard pressure opening: 0.5 bar (also available 2.5, 5 and 10 bar). Permissible flow direction: A → A1. Material: steel AISI 316 (body), steel AISI 316 (stem). Sealing: FKM. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC with a thread internal trapezoidal compliant with the DIN EN 12713 standard and of coupling type CAMLOCK A (plug). The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling reloading TW type MK with a thread internal BSP. Made in accordance with the EN ISO 14420-6 standard (formerly DIN 28450). intended for liquids, bulk materials and gases (with the exception liquefied gas and steam). Material: steel AISI 316. pressure: od -0.8 bar up to 16 bar. Operating temperature: from -20°C to +65°C (should take into account medium and Material sealing). sealing coupling (type the gasket GSD, for 4" type TWO): hypalon. sealing thread (type the gasket GD): teflon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling elbow for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling reducing with a BSPT male thread and a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled connection with BSPT male thread, type B5, with a cutting ring, designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPush-on coupling with male thread, type C1/Z, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Connection angled 90° with a thread external parallel (BSP or M5), made entirely of steel AISI 316L, series 60115. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection straight with a thread external cylindrical, series F type R 1 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Material: brass nickel-plated. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight with a thread external, type R1, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing adapter made of stainless steel, type 62040, with BSPT male thread and BSP female thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA coil 22 mm for valves series 70 of size 1/8" and 1/4", stem Ø8. Insulation class: F155. Voltage tolerance: -10% for +15%. Protection degree: IP65 DIN 40050 with a connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way solenoid valve VCF intended for high-pressure installation hydraulic. variant normally closed (NC). valve equipped is in holes assembly (shown on photo). connector for order separately. Material: aluminum (body), steel galvanized (valve). sealing: NBR. Protection degree: IP65. Working pressure: 250 bar. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery straight, hand device for bending pipes hydraulic in the scope diameters external 6 ÷ 18 mm intended for small workshops. W set roll bending and durable sheet-metal Case. device adapted for mounting in vice (vice not is in set). weight: 10 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDo connecting individual element na inlet/the outlet (modules) system Syntesi® type SY1 or SY2 (of each other jak and with installations pneumatic) serves hexagonal Adapter made with brass nickel-plated, which easily can remove using two bolts. Material adapter: brass nickel-plated. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket reducing lever coupling FERRARI with fitting for hose, type F.10, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: rubber NR-SBR. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DN11.8 quick coupling socket with a female thread, facilitating quick connection of a water spray gun with a hose or other washing accessories. Material: steel AISI 303/304L. Sealing: Viton. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 1/2" with a thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK D with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange straight INTERLOCK SAE 6000, O-ring or other gasket in the flange groove, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose fitting with male thread, type A19, intended for connecting pneumatic components. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight NON SKIVE with BSP female thread, with 60° cone sealing with an O-ring (DKOR), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Hose fitting, NiTO type A with a BSP female thread with a flat seal, hex nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting type CNP terminated with a tapered BSPT male thread made of AISI 304 steel with a "tail" for a hose. Intended for rubber hoses and industrial plastic hoses. Assembly by means of bands, clamps or special sheet-metal ferrules of the CNFL type. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug for cleaning hoses and pipes intended for equipment ULTRACLEAN. used tam, where on surface internal hoses and pipes deposits Layer scale, rust and other contaminants. cleaning consists in on perforating plug using compressed air. Available range diameters 6 ÷ 110 mm. possibility sale in packaging collective (amount pcs in packaging collective dependent is od diameter outer plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled body of the BANJO coupling with BSP female thread, type D12. Through-bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCable protecting against effects accidental disconnection hose. version AC and BC has copper ferrules and Intended is for applications in mining. Material cable: steel galvanized or steel stainless.
