Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of petroleum-derived products, gasoline, diesel fuel, heating oil, aviation fuel JET A1, kerosene. Marked on the sleeve with a single yellow stripe and white letters LT. Inner layer: NBR (nitrile) rubber. Reinforcement: nylon cord. Outer layer: CR (chloroprene) rubber. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (temporarily +100°C depending on the medium).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of petroleum-derived products and fuels with aromatic compound content up to 50%, cooling water with oil-based anti-corrosive agents, lubricating and hydraulic oil, seawater. Marked with a yellow-blue-yellow stripe on the sleeve. Inner layer: HNBR rubber (nitrile). Reinforcement: steel cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -35°C to +100°C (temporarily +120°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of metric rings (front + rear) for use in LET-LOK® type couplings. Quantity: 10 pieces. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling set without valve - socket and plug with hose end intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting the two parts of the coupling relative to each other. This coupling also allows for slight rotation of the connected hose, preventing it from twisting and accidental disconnection. Versions with a valve and in black color are also available. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 6.9 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling set without valve - socket and plug with hose end intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting the two parts of the coupling relative to each other. This coupling also allows for slight rotation of the connected hose, preventing it from twisting and accidental disconnection. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] - total length. Material: polycarbonate. Sealing: NBR o-ring. Working pressure: up to 6.9 bar. Operating temperature: from -40°C to +121°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete ANFOR lever coupling with welding connection for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: black steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the size of the coupling). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete BANJO plug tee, type R55, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-end fitting for hose, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° BURGACLIP end for compressor, with R134 HP (16 mm) or LP (13 mm) valve with internal UNF thread, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° BURGACLIP fitting with internal UNF ORFS thread - flat seal, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to air conditioning system components. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° BURGACLIP fitting with internal UNF SAE thread - sealing on a 45° cone, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to air conditioning system components. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° BURGACLIP fitting with external UNF thread, with socket, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° BURGACLIP flange with socket, for 3090 type air conditioning hose. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° JIC INTERLOCK fitting with internal UNF thread, 74° cone with o-ring, for hose types 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° NON SKIVE end with internal UNF thread, with sealing on a 74° cone (DKJ), intended for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° NON SKIVE end with internal metric thread, with sealing on a 24° cone, o-ring (DKOS 45), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end without nut for air conditioning hose type 3356 and 3090. Material: steel.- Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end BURGACLIP without nut for air conditioning hose type 3090. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end BURGACLIP with internal UNF thread for compressor, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end BURGACLIP with internal UNF thread, for 3090 type air conditioning hose. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end BURGACLIP with external UNF thread, with socket, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end BURGACLIP with R134 HP (16 mm) or LP (13 mm) valve with internal UNF thread, for hose type 3090 for air conditioning. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end with internal UNF thread, for hose for air conditioning type 3055. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end with internal UNF thread, for air conditioning hose type 3356 and 3090. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° tube end with R134 HP (16 mm) or LP (13 mm) valve with internal UNF thread, for 3055 type air conditioning hose. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° end with internal UNF SAE thread, 45° cone, for 3055 type air conditioning hose. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° end fitting with external UNF thread and socket, for 3055 type air conditioning hose. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° BURGACLIP end for compressor, with R134 HP (16 mm) or LP (13 mm) valve with internal UNF thread, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to air conditioning system components. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° BURGACLIP fitting with internal UNF ORFS thread - flat seal, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to air conditioning system components. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° BURGACLIP fitting with external UNF thread, with socket, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal thread for high-pressure washers. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with BSP female thread series 1B type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve, and locking occurs via a knurled nut that clamps the flexible hose onto the connecting sleeve. Multiple installations are possible. Designed for flexible hoses made of materials (PVC, silicone) reinforced with a specific wall thickness. The fitting withstands short pressure spikes up to 30 bar at +20°C. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with BSP female thread series 1C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. It is intended for smooth-walled unreinforced hoses and tubes made of harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with BSP female thread series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of PTFE, FEP, PFA fluoropolymers, glass, metal, polyamide (PA), and polyethylene (PE) tubes. Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates hose cross-section reduction, which does not affect media flow. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with BSP female thread type EM, widely used in laboratories, medicine (e.g., dialysis devices), pharmaceutical, chemical, and food industries. It features an integrated sleeve for easier installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. It is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON® hoses. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP series 1C type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. Designed for smooth-walled unreinforced hoses and tubes made from harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP series 1D type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion at the ends for installation (so-called flared connection). This solution guarantees no particle deposition, bacterial accumulation, and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass tubes, metal, polyamide (PA), and polyethylene (PE) tubes. Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates the reduction of hose cross-section, which consequently does not affect the flow of media. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP, type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple installations without the need for tools. It is intended for flexible smooth-walled unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone, and TYGON® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar.
