Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for Guillemin connection. Material: viton.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for symmetrical connections standard NOR. Material: NBR. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for symmetrical joints standard ROTTA ROTH (Russia). Material: NBR. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for symmetrical connections standard SMS (Sweden). Material: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTRI-CLAMP coupling gasket series 3C type EM. Material: EPDM, FKM, Gylon® and PTFE.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfile gasket for TW (tank truck) connection type GSD (for 4" connection, O-ring type TWO is used). Material: polyurethane (PUR). Temperature range (approximate): from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHygienic RJT joint gasket according to BS 4825-5. Operating temperature: from -50°C to +200°C. Material: silicone.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for securing screws against loosening. It features medium viscosity and medium strength. It has KTW certification - approval for installation in drinking water systems. Disassembly is possible using standard tools. Maximum thread size: M 36. Operating temperature: -60°C to +150°C. Packaging type "pen" with a capacity of: 20 and 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for securing screws against loosening and for locking pins. It features medium viscosity and very high strength. Difficult to disassemble. Maximum thread size: M20. Operating temperature: -60°C to +150°C. Packaging type "tube" with a capacity of: 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic thread sealant for passive materials without an activator. Sealing of hydraulic and pneumatic systems. Increased viscosity, high strength – very difficult disassembly. Maximum gap 0.20 mm. Color: green. Operating temperature: from -60°C to +180°C. Packaging type "pen" with a capacity of: 20 and 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermally resistant sealant in the form of a semi-liquid paste that cures to a non-sticky state within 10 to 15 minutes, and completely within 18 hours. Supplied in 310 ml tubes for a caulking gun. It should be used in well-ventilated areas and avoid contact with gasoline or diesel fuel. Material: a mixture of amorphous silica, polydimethylsiloxane (a type of silicone), iron oxide, and a catalyst. Operating temperature: from -59°C to +287°C (temporarily up to +538°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for hot water pressure washing equipment. The outer layer is resistant to abrasion, oils, and animal fats. High flexibility facilitates operator work. Inner layer: black NBR rubber. Reinforcement: single textile braid, single steel braid, or double steel braid. Outer layer: yellow Carbryn®/NBR blend. Working pressure: 103 bar (for hose with nominal inner diameter DN12 - 83 bar), 206 bar, or 310 bar, depending on hose type. Operating temperature: from -30°C to +93°C (for hose with single textile braid), from -30°C to +120°C, for others.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry ice blasting hose – granulated solid carbon dioxide. Dry ice cleaning is used for removing coatings, adhesives, residues, etc., in various industrial sectors. The advantages of the process include no damage to the cleaned surface, no aggressive chemicals, no water in the process (compared to high-pressure water cleaning), and no abrasive residue (compared to sandblasting). Dry ice (solid carbon dioxide) has a temperature of up to -78.5°C (melting point), in granulated form, and sublimates to gas during the process. The DRY ICE hose is specifically designed for the transport of dry ice. The inner layer is smooth, made of anti-static synthetic rubber resistant to abrasion and low temperatures. The outer layer is anti-static, abrasion-resistant, weather-resistant, and ozone-resistant. It is fitted with quick couplings and specialized dry ice cleaning guns. Inner layer: black synthetic rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -55°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for pressure cleaning of sewage systems with water. Standard lengths: 80, 100, 120, 150, 180, 200, 250 m. Inner layer: thermoplastic polyester. Reinforcement: double polyester braid. Outer layer: orange for JC 7 and red for JC 8 polyurethane, abrasion-resistant. Working pressure: from 200 bar to 345 bar (depending on the diameter and type of hose). Operating temperature: from -40°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose intended for high-pressure washing and flushing of sewage systems. Outer layer resistant to abrasion, oil mist, and weather conditions. Manufactured according to standard EN ISO 1307. Inner layer: black, smooth synthetic rubber. Reinforcement: double textile braid. Outer layer: black, smooth synthetic rubber. Working pressure: 250 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for conveying wine, fruit juices, beer, and water, with smaller diameters. Can be used with drum reels. Completely free of animal-derived ingredients, phthalates, plasticizers, and nitrosamines. Highly resistant to cleaning and disinfection processes used in the food industry. Inner layer is tasteless and odorless. Outer layer is abrasion and aging resistant. Standards and requirements: Food industry, food contact 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA, D.M. 21/03/73, BfR II. Inner layer: white smooth technopolymer. Reinforcement: synthetic braid. Outer layer: blue smooth technopolymer. Working pressure: 10 bar. Operating temperature: -20°C to +80°C (temporarily up to +90°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-soiling, abrasion-resistant, oil and grease resistant, high-quality FORTRESS® hose. With an external Microban® antibacterial coating and high flexibility, it finds wide application in cleaning devices in the cosmetic, food, pharmaceutical industries, etc. Inner layer: black NBR rubber. Reinforcement: single textile braid or single steel braid. Outer layer: yellow Carbryn® rubber protected with a Microban® coating. Working pressure: 69 bar or 207, depending on the type of hose. Operating temperature: from -30°C to +93°C or from -30°C to +120°C, depending on the type of hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose with an extended temperature working range compared to standard hydraulic hoses. Standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 78 bar to 400 bar depending on the hose diameter. Operating temperature: from -50°C to +135°C (temporarily +150°C). For water and air, the maximum operating temperature is +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 856 4SP. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 280 bar to 450 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose designed for the most demanding applications. Excellent resistance to pulsating pressures. Thanks to a special rubber compound, the outer layer is antistatic, highly flame-resistant, highly resistant to ozone, weather conditions, abrasion, and UV radiation. Standards: EN 856 4SH, ISO 3862-4SH. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black synthetic rubber. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Enhanced hose lifespan compared to the standard confirmed by a test of 1,000,000 impulse cycles. Outer layer is flame-resistant (MSHA). Standards: EN 856 R13, ISO 3862-1 R13, SAE 100R13. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 51). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 350 bar. Operating temperature: from -40°C to +120°C (temporarily +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose with increased outer diameter for applications in mining. Antistatic, non-toxic, flame-resistant outer layer. It has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 853-2ST. Installation: contact TUBES INTERNATIONAL®. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for mining applications. Antistatic, non-toxic, flame-resistant outer layer. It has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black synthetic rubber. Working pressure: from 350 bar to 420 bar depending on the hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility. Complies with standards: EN 857 2SC, SAE 100R16, SAE 100R2AT. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Working pressure: from 165 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility. Complies with standards: EN 857 1SC, SAE 100R1 AT. Inner layer: black synthetic rubber. Reinforcement: single steel braid. Outer layer: black synthetic rubber. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, high-quality flexible hose made of fluorine rubber, resistant to solvents, fuels, oils, aggressive chemicals, also under elevated temperature conditions. Used for cleaning solvents (dry cleaning, solvent recovery systems), aggressive chemicals, acids and bases, hot oils and fuels. Suitable for peristaltic pumps. Resistant to ozone, sunlight, and weather conditions. The opaque black wall of the hose completely protects light-sensitive substances. The production process of the hose with post-vulcanization heating removes any residues and ensures minimal outgassing, required in vacuum and space applications. Full roll length of the hose is 15 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: fluoroelastomer (FKM). Maximum operating temperature: +204°C. Brittleness temperature: -51°C. Hardness: 60° Shore (A). Density: 1.90 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically and thermally resistant two-layer hose designed for the discharge and transfer of the most chemically aggressive vapors, gases, dust, and fibers (non-abrasive), as well as for the blowing of hot air. Very good chemical resistance to aggressive chemicals due to the internal layer of PTFE. In the standard version, the internal layer of white natural PTFE meets food industry requirements (FDA). In the antistatic version EL, the black internal layer of PTFE is electrically conductive (R ≤106 Ω). The hose features high compressibility - up to 1:6, a strong construction resistant to vibrations, stretching, and tearing, and impact resistance due to the external spiral. Resistant to UV radiation, ozone, and aging. Used in the chemical, petrochemical, and food industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material internal layer: white PTFE film - standard version HYTEF, black conductive PTFE film - antistatic version HYTEF EL. Hose material external layer: black polyethylene fabric coated with CSM rubber. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -35°C to +175°C (temporarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically resistant hose designed for the extraction and transfer of aggressive chemical vapors from solvents, paints, hydrocarbons, chemicals, etc. Thanks to the conductive FKM rubber, it has antistatic properties (surface resistance R <106 Ω). Very good resistance to oil, aromatic substances, most acids, and chemicals. Excellent resistance to elevated temperatures. Resistant to UV radiation and ozone. Characterized by high compressibility - up to 1:6, strong construction resistant to vibrations and stretching, impact resistance due to the external spiral. Used in the paint, chemical, and paper industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for FKM (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material: polyester fabric coated with FKM, antistatic, externally black. Reinforcement: external spiral made of steel sheet and wire. Operating temperature: from -25°C to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight and with excellent flexibility, the hose is designed for the discharge of oil vapors, dust, and light bulk materials. Resistant to microorganisms and hydrolysis. Compliant with FDA requirements and European Directives. Hose material: transparent polyether-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled insulating cover designed for cooling electrical hoses in automatic welding systems. Electrical resistance 1x108 Ω/m. Inner layer material: black SBR/NR rubber. Outer layer material: black SBR/NR rubber. Reinforcement: textile braid. Working pressure: 10 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft fuel hose made of special NBR rubber resistant to methyl ester of fatty acid rapeseed oil (RME). Reinforcement with synthetic textile braid. Outer layer made of chloroprene rubber (CR), antistatic, self-extinguishing, resistant to abrasion, temperature, and aging. Particularly recommended for biofuels based on methyl esters of fatty acids (FAME) such as biodiesel B10, B20, B100. Resistant to methyl ester of fatty acid rapeseed oil (RME). Can also be used for regular diesel fuel. Inner layer: special NBR rubber. Reinforcement: synthetic textile braid. Outer layer: CR rubber. Working pressure: 15 bar. Operating temperature: from -30°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose designed for suction and transport of abrasive materials: sand, gravel, debris, leaves, and other contaminants. Intended for use in street, square, and road cleaning. Used in sweepers and other municipal and road service equipment. The special design of the P7 M STREET hose ensures that despite its large wall thickness (1.4 mm), it has a smaller bending radius (1.2 x D) than standard hoses of this thickness. The folds of the hose between the spiral at the bend turn outward, reducing flow resistance and wear. Flexible, low-compressible, smooth inside, and elastic even at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Wall thickness is measured between the spiral. Installation on fittings with bridge clamps (right-handed). Other diameters may be available upon special request. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight transparent smooth-walled hose made of natural (non-regenerated) fluoropolymer PFA (perfluoroalkoxy), a material with properties similar to PTFE. The hose features excellent chemical resistance, dimensional and shape thermal stability, a very smooth, micropore-free internal and external surface, high pressure resistance, and crack resistance due to excessive stress. Good transparency of the hose allows for easy observation of level or flow. UV resistant. Designed for low-pressure installations of aggressive chemicals or when high purity and chemical inertness of the hose material are required. Commonly used in laboratories, chemical and pharmaceutical industries. Due to its excellent insulating properties (dielectric strength 3 to 4 times greater than PTFE), it is used in the electronics and semiconductor industries. The hose is not antistatic (does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic plug connections. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Safety factor n = 4:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Hose material: PFA. Shore hardness (D) 60. Operating temperature: from -200°C to +260°C. Working pressure: from 7 bar to 19.5 bar - depending on the diameter and wall thickness of the hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic, resistant to kinking hose designed for hydraulic oil, water-based fluids, and other media. Used in measurement systems, control systems, hydraulic brake systems in bicycles, and micro-hydraulics (car roof opening systems). The outer layer is made of abrasion-resistant polyurethane or polyamide and is micro-perforated, allowing the hose to be used for gas media. The hose has vacuum resistance up to 0.93 bar. Temperatures above 80°C may reduce the hose's lifespan. The DN2 hose made of polyamide (ZC-TEST8-5021PA) has successfully passed impulse tests of 1 million cycles. Inner layer: polyester or polyamide. Reinforcement: single aramid braid. Outer layer: black polyurethane or polyamide. Working pressure: from 412 bar to 500 bar, depending on the diameter and type of hose. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose made according to platinum-enhanced technology. Steam sterilization (max. +135°C at 3.5 bar pressure for 30 min.). The inner layer meets FDA, USP Class VI, D.M. 21/03/73, and EU Regulation No. 10/2011 requirements. The outer layer meets USP Class VI, FDA, and European Pharmacopoeia standards. Hose compliant with EC 1935/2004 and 2023/2006/EC (GMP). Free from animal-derived substances, phthalates, adipates, and materials subject to restrictions of Directive EC 1907/2006 (REACH). Safety factor 3:1. The specified bend radius applies to static pressure. Working pressure (20°C): from 4 bar to 10 bar, depending on hose diameter. Inner layer: white smooth fluoropolymer PFA. Dynamic. Reinforcement: polyester braiding, AISI 302 steel spiral. Outer layer: transparent silicone. Operating temperature: from -30°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, reinforced polyester braided hose, odorless and tasteless, non-toxic, free from phthalates and BPA (Bisphenol A). Designed for the transfer and dispensing of food products under higher pressure. Smooth, non-porous inner surface of the hose eliminates the problem of product particle settlement and bacterial growth. Resistant to alkaline cleaning agents. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). Compliant with REACH and California Proposition 65 - does not contain hazardous and prohibited substances. Possible sterilization with ethylene oxide. After installing fittings with appropriate hygienic design, cleaning by CIP method is possible. Full hose roll length 15 m (from internal diameter 38.1 mm - 6 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transport and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). Inner layer made of black, smooth NBR/PVC rubber blend. Reinforced with layers of durable synthetic cord and steel spiral. It has copper wires ensuring electrical continuity between the hose ends – provided that it is properly connected to the fittings. Outer layer made of CR chloroprene rubber, flame-retardant, resistant to oil, seawater, abrasion, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms, successfully utilized in land applications. Higher working pressure versions (20 / 27 / 30 / 35 bar) available on special order, with specified breaking strength under tension (up to 2T for 2”, 4T for 3”, and 7T for 4”, 5”, and 6”) and ABS type approval for the complete hose. Inner layer: black NBR/PVC rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: from 17 bar to 20 bar - depending on the hose diameter. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of aviation fuel (jet fuel, kerosene, e.g., Jet A1) and petrochemical products containing up to 50% aromatic compounds, primarily for draining fuel from aircraft tanks, loading and unloading airport tankers and fuel dispensers. The outer layer is antistatic, abrasion-resistant, oil-resistant, and weather-resistant. It features copper wires ensuring electrical continuity (R < 100 Ω) between the hose ends and dissipation of electrostatic charges. Compliant with requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong suction-discharge hose for aviation fuel, intended for filling and emptying aircraft tanks, loading and unloading airport tankers and fuel dispensers. As a hose without metal components, it can be used for direct filling and emptying of aircraft tanks. It can be wound on reels. Suitable for aviation fuel for turbine engines (aviation kerosene, e.g., Jet A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Inner layer made of black, smooth NBR rubber. Reinforcement with layers of high-strength synthetic cord and a polymer spiral (PET). Outer layer made of black, antistatic synthetic rubber, resistant to abrasion, weather conditions, and contact with oil. Antistatic outer layer ensures the required low resistance of the hose between the ends (10^3 Ω < R < 10^6 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. Other diameters and hoses with fluorescent markings visible at night are available upon special order. Inner layer: black NBR rubber. Reinforcement: synthetic cord, PET spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHyperline FX SS AS SI WHITE hose is a lightweight, flexible Teflon hose. Due to its properties, it is recommended for the transfer of hot media and CIP applications. The hose can be supplied by the meter or as complete assemblies. The outer layer made of white silicone facilitates cleanliness maintenance. This solution also protects the operator from burns. High resistance of the inner layer to prolonged exposure to steam. At operating temperatures above +160°C, the maximum working pressure specified in the technical data should be reduced by 1% for each 1°C above this temperature. For example, at a temperature of 180°C, the maximum working pressure for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. The specified value of vacuum is defined for operating temperatures up to 150°C. The hose is standardly available in an antistatic version and is also available in a natural PTFE version. Hose material: smooth inside, corrugated outside, antistatic PTFE (Teflon). Reinforcement: single braid of AISI 304 steel with an additional protective layer of white silicone rubber. Working pressure: from 50 bar to 110 bar - depending on the hose diameter. Operating temperature: from -70°C to +204°C.
