Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsType CNP end with external BSPT tapered thread made of galvanized steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with external BSPT thread type AI 13480 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsH-type clamp sleeve used for securing hoses on ends without a locking mechanism connecting the sleeve to the end. It can also be used on NiTO ends and quick-connect ends. Low-pressure hoses up to approximately 30 bar (depending on diameter) made from various materials can be used with clamp sleeves, provided that the hose material is sufficiently soft for this type of clamp. Primarily rubber hoses with textile reinforcement and PVC hoses. There is also the possibility of crimping hoses with a steel braid (e.g., PZ type hose). The internal diameter of the sleeve should be selected according to the external diameter of the hose, while ensuring that the diameter of the hole at the front of the sleeve matches the used end. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - hole diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type B with external BSPT thread. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCND connector corrugated intended for rubber hoses and industrial plastic hoses made of galvanized steel. Designed for assembly using straps or clamps. For multiple assembly and disassembly. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass angle connector type AI 13260 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsH-type clamp sleeve used for securing hoses on ends without a locking mechanism connecting the sleeve to the end. It can also be used on NiTO ends and quick-connect ends. Low-pressure hoses (up to approx. 30 bar depending on diameter) made from various materials can be used with clamp sleeves, provided that the hose material is sufficiently soft for this type of clamp. Primarily rubber hoses with textile reinforcement and PVC hoses. There is also the possibility of crimping hoses with steel braiding (e.g., type PZ hose). The internal diameter of the sleeve should be selected according to the external diameter of the hose, while ensuring that the diameter of the hole at the front of the sleeve matches the used end. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - hole diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with internal BSP thread and flat sealing, hexagonal nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNP type end with external tapered BSPT thread made of AISI 304 steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsH-type crimping sleeve used for clamping hoses on ends without a locking mechanism connecting the sleeve to the end. It can also be used on NiTO ends and quick coupling ends. Low-pressure hoses up to approximately 30 bar (depending on diameter) made from various materials can be used with crimping sleeves, provided that the hose material is sufficiently soft for this type of clamp. Primarily rubber hoses with textile reinforcement and PVC hoses. There is also the possibility of crimping hoses with a steel braid (e.g., type PZ hose). The internal diameter of the sleeve should be selected according to the external diameter of the hose, while ensuring that the diameter of the hole at the front of the sleeve matches the used end. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - hole diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting "T" type AI 13200 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting with fixed nut and internal BSP thread. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCND corrugated connector intended for rubber and plastic industrial hoses made of AISI 304 steel. Designed for assembly using straps or clamps. For multiple assembly and disassembly. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass straight connector type AI 13460 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic (e.g., polyamide) pipes and hoses. The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLN type soldering nipple, spherical, sealing cone 60°, similar to DIN 7608. Use nut type UM (EC- 105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight BANJO fitting type RS, similar to DIN 7642, intended for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNW type end fitting for welding made of carbon steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with internal BSP thread and flat sealing, knurled nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass reinforcing insert used for flexible hoses for AI 13000 type couplings. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNW type end fitting for welding made of AISI 304 steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external thread fitting, internal cone 45°. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUM type nut with metric or BSP thread, similar to DIN 3870, for S and SF type fittings. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle fitting with external BSPT thread type AI 13280 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose end with external BSP thread for use in industrial installations, e.g., for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: from -20°C to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSA type end fitting with external BSP thread, 60° cone sealing, designed for low-pressure rubber and non-reinforced plastic hoses as well as those with textile reinforcement, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air installations, etc. Material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType CNP end with external tapered BSPT thread made of AISI 316 steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "T" fitting with internal BSPT thread type AI 13240 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 18 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFixed flange PN16 type CNWF made of AISI 304 steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps or clamp bands. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpherical end - insert under the nut. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking ring for metric threaded nut type AI 13740 made of brass. Range of external diameters of connected pipes from 4 to 22 mm. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHS type BANJO screw with metric or BSP thread, similar to DIN 7643. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angular fitting type RBU with nut, spherical, 60° cone sealing, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal nut for spherical end - insert under the nut. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling with internal BSP thread type AI 13500 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRL type BANJO end fitting for soldering, similar to DIN 7642. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall end for hose - insert under the nut - for use in industrial installations, e.g., for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass nut AI 13680. Range of external diameters of connected pipes from 4 to 22 mm (Diameter D). Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with external BSP thread and flat sealing. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsS-type end fitting with a 60° sealing cone, spherical, similar to DIN 7608, intended for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Use nut type UM (EC-105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle fitting with internal BSP thread type AI 13290 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 18 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
