Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble straight BANJO fitting type DRS, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO connector with a BSP male thread type AI 13550 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass. Gasket: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting type SF with a flat seal, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Use a UM type nut (EC-105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Connector for flexible hoses. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with a BSP male thread with a gasket flat type AI 13485 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass. Gasket: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube fitting type RST, without a nut, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Screw-together connector for hoses NiTO type A with a BSP thread with a flat seal. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details"T" tee connector with a BSPT male thread type AI 13220 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hoses. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube connector with a hose fitting type AI 13540 intended for joining copper pipes with a hose. Range of external diameters of the joined pipes from 6 to 14 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt for BANJO type DHS with a metric thread, with two holes. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter type RDST with a metric male thread, reducing, 60° cone seal. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass cross connector type AI 13510 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 14 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / Details"T" connector for a hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum installations, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for the fitting NITO with a female thread type A.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO fitting type DRL double, for soldering. Material: carbon steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for a hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum installations, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter type DST with a metric male thread, 60° cone seal. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details"Y" tee connector for a hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum installations, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled connector 90° for a hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum installations, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee type TSM intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled BANJO fitting 90° type RBR, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting, type NA with a BSPT and metric male thread. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum installations, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP male thread, type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. The design allows repeated assembly without the need for tools. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone and TYGON® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled tube fitting 90° type RBS, without a nut, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO adapter type R-G with a metric male thread or BSP, 60° cone seal. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTapered Fitting with a "tail" for pneumatic hoses, without a safety flange. Material: galvanized cast iron. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut DIN 8537/20033 with an Rd thread intended for a tapered fitting with a "tail" for a hose. Material: galvanized cast iron. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter DIN 20037 with a BSP and Rd male thread, for use in a pneumatic installation. Material: steel/galvanized cast iron. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCylindrical filter with round holes with a BSP threadT for use with hoses for drawing water, sewage, emptying tanks, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCylindrical filter with round holes with a "tail" for a hose for use with hoses for drawing water, sewage, emptying tanks, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO adapter type R-G-L with a metric male thread, 24° cone seal. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for connectors for copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide) with a BSP male thread, with a gasket. Standard: EN 1254-2. Material: brass. Gasket: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded cross with BSP female threads, 3F series type EM. is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded cross with BSP male threads, 3F series type EM. is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConical filter with holes on top with a BSP threadT for use with hoses for drawing water, sewage, emptying tanks, etc. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with a BSP female thread, 3F series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with a BSP male and female thread, 3F series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled nipple with a BSP male thread, 3F series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPN16 fixed flange type CNWF made of carbon steel with a "tail" for a hose. Intended for rubber hoses and industrial plastic hoses. Assembly by means of bands or clamps. Material: carbon steel, galvanized.
