Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and very flexible and flexible hose delivery of reinforcement two braids steel intended for conducting steam saturated o higher pressure. Layer inner resistant na steam o high temperature. Layer outer resistant na high temperature and conditions atmospheric. Do steam water use special fitting screw-together screws intended for steam water – precisely selected for diameter and wall thickness hose. in order to elongation service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: double braid steel. Outer layer: red rubber EPDM, micro-perforated. pressure working: 18 bar. Operating temperature: from -40°C to +210°C (momentarily up to +230°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft and flexible hose delivery o reinforcement textile intended for conducting steam saturated. Layer inner o sound resistance na high temperature and steam saturated. Layer outer resistant na temperature, abrasion, conditions atmospheric and ozone. hose wide used in industry for low-pressure steam saturated – for light applications. For water steam, use special fittings bolted with screws, intended for water steam. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: synthetic cord. Outer layer: black rubber EPDM, micro-perforated. pressure working: 6 bar. temperature use: from -40°C to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hose delivery, of reinforcement steel, intended for conducting steam superheated. Layer outer resistant na high temperature and conditions atmospheric. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black or red rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning and rinsing installations and machine in industry food steam water and hot water. Layer inner meets requirements FDA 21 CFR 177.2600 and BfR XXI kat.2. Layer outer resistant na fats vegetable and animal. hose high quality, commonly used for cleaning and rinsing hot water or steam installations and machine in industry food (np. dairies, industry meat). Note: nie should use hose simultaneously for water and steam water. For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. length standard rolls: 60 m (or 120 m - contact with Tubes International). Inner layer: white rubber butyl. Reinforcement: synthetic cord. Outer layer: blue rubber NBR/PVC. pressure working: 6 bar (10 bar - for water). factor safety: 10:1 (3:1 - for water). temperature use: from -30°C to +165°C (from -30°C to +95°C - for water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery compliant with dimensions and requirements standards EN ISO 6134:2005 type 2 class A (Ω), of reinforcement steel, intended for conducting steam saturated and superheated. Layer inner o sound resistance na high temperature and steam saturated. can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant na temperature, conditions atmospheric, abrasion and aging. antistatic R ≤10 6 Ω. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conducting steam saturated, o sound resistance na high temperature, abrasion and ozone. on request Available hose acc. to standards EN ISO 6134:2005 type 1 class A. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: synthetic cord. Outer layer: black rubber EPDM. pressure working: 6 bar. temperature use: from -40°C to +165°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible hose delivery of reinforcement steel for conducting steam saturated. Layer inner o sound resistance na high temperature, steam saturated and phenomenon pop-corningu (destruction layer internal through penetration condensate steam). withstands momentarily steam superheated o temperature 230°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant na temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. factor safety: 10:1. length standard: 60 m. Inner layer: black rubber IIR. Reinforcement: double steel wire cord. Outer layer: red rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality A gun for steam meeting requirements safety use with steam water. equipped in coupling swivel for hose. Available with wide range equipment – different kinds lances and nozzles. used for rinsing and cleaning steam equipment, equipment, floors, defrosting equipment external. incoming for gun a hose steam is in center gun redirected for valve shut-off against leakage through lance and nozzle. ergonomically designed A trigger reduces force opening valve. release trigger causes Automatic shut-off inflow steam, securing against jej undesirable outflow and possible accidents. special insulation thermal gun (perforated A guard with sheet stainless na bridges with resistant thermally plastic) eliminates risk burns. A handle gun can be easily remounted na the other side, for operation through the operator left-hand (nie enters in composition gun and should order separately!). standard A gun equipped is in coupling swivel, co prevents tightening hose during use. A gun is often used together with of specialized valve for steam – available na request. selection configuration gun in contact with Tubes International. Material: steel stainless (main element, resistant thermally plastic. sealing: PTFE with fiber glass. pressure working: 10 bar. temperature use: up to +180°C (momentarily up to +210°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp shell Heavy Duty in version economical intended primarily for hoses rubber for steam water for mounting ends for steam type SSF. made according to EN 14423 (DIN 2826). screws and a nut of steel zinc-plated (for clamps with brass), of steel stainless (for clamps of steel stainless). a clamp should select for diameter internal hose and for wall thickness wall hose acc. to size nominal clamp, tak, to Diameter outer mounted hose fit in given for clamp the scope. initial tightening clamp requires use long bolts auxiliary. Material: steel AISI 316, brass. temperature use: for + 230°C. pressure working: 18 bar (+ 210°C) – steam saturated, other use: selection in contact with TUBES INTERNATIONAL®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with a thread internal BSP, type SSF (version economical). Intended primarily for hoses rubber for steam water, with serrated tail and with a lock, for mounting in hose at means clamps shell for steam (type Heavy Duty). made in accordance with EN 14423 (DIN 2826). Material: steel AISI 304, brass. pressure working: 18 bar (+210°C) – steam saturated, other use: selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings with a thread internal BSP and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with a spigot („tail”) for hose, a nut wing B of special a thread internal (NPS) and special adapter GFB with a thread external (NPS) such jak in nut and a thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant na action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Material: steel/cast iron galvanized. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp SBC (Steam Bolt Clamp) with cast iron galvanized, steel stainless (cast steel) AISI 316 and brass, bolted screws, with claws for lock (flange) ends. intended primarily for mounting ends for steam type GF and MS BOSS in hoses rubber for steam water. a clamp should precisely select both for size (diameter internal) hose, jak and actual diameter outer hose, a in period operation should je periodically check and optionally tighten. depending on size, clamp differ od each other shape, amount claws and amount bolts mounting. Material: cast iron galvanized, steel stainless AISI 316, brass. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with a BSPT male thread, type SSF (version economical). Intended primarily for hoses rubber for steam water, with serrated tail and with a lock, for mounting in hose at means clamps shell for steam (type Heavy Duty). made in accordance with EN 14423 (DIN 2826). Material: steel AISI 304, brass. pressure working: 18 bar (+210°C) – steam saturated, other use: selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery of reinforcement steel and with layer external resistant na oil, for conducting steam saturated and superheated. Layer inner o sound resistance na high temperature and steam saturated. can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant na oil, temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial, in particular tam, where required is resistance layer outer na oils, greases and other products petrochemical. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. hose VAPOFER EN ISO 6134 is version antistatic (R ≤10 6 Ω), compliant with the standard EN ISO 6134/05 type 2 class B (Ω). Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black rubber synthetic, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality A clamp shell Heavy Duty Intended primarily for hoses rubber for steam water for mounting ends for steam type VSS, MSS, FSS, SSF. made (sizes 1/2” for 2”) according to EN 14423 (DIN 2826). screws and a nut of galvanized steel (for clamps with brass), of steel stainless (for clamps of steel stainless).a clamp should select for diameter internal hose and for wall thickness wall hose acc. to size nominal clamp, tak, to Diameter outer mounted hose fit in given for clamp the scope. initial tightening clamp requires use long bolts auxiliary. Material: brass, steel AISI 316. temperature use: for + 230°C. pressure working: 18 bar (+ 210°C) – steam saturated, other use: selection in contact with TUBES INTERNATIONAL®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings with a thread external tapered BSPT and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock ensure safe connection hose with installations. mounted for hose with use clamp for steam SBC type BOSS. sealing on the thread tapered BSPT or NPT using packing (np. tape PTFE). depending on size and kinds material, fittings can differ shape tail. Material: steel galvanized, cast iron galvanized, steel stainless AISI 316, brass. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality fittings with a thread internal BSP. intended for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (type Heavy Duty). sealing ends using special the gasket fiber (Frenzelit®), flat for version of galvanized steel and brass, and PTFE for steel stainless. Material: steel galvanized, steel AISI 316, brass. temperature use: up to +230°C. pressure working: 18 bar (+210°C) - steam saturated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange fixed, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel galvanized. pressure working: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (np. PN40) - selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality fittings with a BSPT male thread and NPT. intended for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (type Heavy Duty). sealing ends with a thread external - on the thread ( np. PTFE tape); in case thread BSPT, exists possibility seal flat na surface butt. Material: steel galvanized, steel AISI 316, brass. temperature use: up to +230°C. pressure working: 18 bar (+210°C) - steam saturated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. W made of steel zinc-plated, has special an insert polymer or copper na surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. This creates a tight connection resistant to steam and high temperature, which is at the same time easy to unscrew and screw on without using tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with a thread internal. use adapter allows creating various connections, depending on element used in installations. Material: steel galvanized. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNuts wing B, used as parts interchangeable ends GF system BOSS. enable at use fittings GB and various adapters GFB, GMB, GDB flexible configuring complete ends GF, also in versions mixed material. Material: steel or cast iron galvanized, steel AISI 316, brass. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings ball GB, used as parts interchangeable ends GF system BOSS. enable at use a nut B and various adapters GFB, GMB, GDB flexible configuring complete ends GF, also in versions mixed material. Na request available are also selected fittings of steel AISI 316 or brass. Material: steel or cast iron galvanized. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector for sections rubber hoses for steam water. intended for mounting using clamps for steam SBC (type BOSS). Material: steel or cast iron galvanized. pressure working: 18 bar (+210°C) - steam saturated. temperature use: for +230°.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. W made of steel zinc-plated, has special an insert polymer or copper na surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. This creates a tight connection resistant to steam and high temperature, which is at the same time easy to unscrew and screw on without using tools. thread a nut wing has different (greater) size than thread external adapter GMB. use adapter allows creating various connections, depending on element used in installations. Material: steel galvanized. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. W made of steel stainless, has special an insert polymer or copper na surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. This creates a tight connection resistant to steam and high temperature, which is at the same time easy to unscrew and screw on without using tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with a thread internal. use adapter allows creating various connections, depending on element used in installations. Material: steel stainless AISI 316. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. has tapered surface, cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. This creates a tight connection resistant to steam and high temperature, which is at the same time easy to unscrew and screw on without using tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with a thread internal. use adapter allows creating various connections, depending on element used in installations. Material: brass. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings with a thread internal NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with a spigot („tail”) for hose, a nut wing B of special a thread internal (NPS) and special adapter GFB with a thread external (NPS) such jak in nut and a thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant na action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Material: brass. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. W made of steel zinc-plated, has special an insert polymer or copper na surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. This creates a tight connection resistant to steam and high temperature, which is at the same time easy to unscrew and screw on without using tools. Adapter GDB on both sides screwed with a nut wing can connect two hoses with fitting GF. Material: steel galvanized. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange swivel, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel stainless AISI 316, steel galvanized. pressure working: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (np. PN40) - selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange fixed, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel stainless AISI 316. pressure working: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (np. PN40) - selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange swivel, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel galvanized. pressure working: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (np. PN40) - selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings with a thread internal BSP and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with a spigot („tail”) for hose, a nut wing B of special a thread internal (NPS) and special adapter GFB with a thread external (NPS) such jak in nut and a thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant na action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Ze regard na reduced structurally lock (flange) fittings 2”, nie should Use clamps for steam type BOSS SBC 2” with 4 claws. Material: steel stainless AISI 316. pressure working: 18 bar (+210°C) - steam saturated. temperature use: up to +230°C.
