Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose suction-delivery intended for transfer milk and substances food, demanding use rubber free of smell and taste. Nie contains plasticizers, phthalates ani substances origin animal. special The design hose "CRUSH PROOF" of spiral with plastic allows return hose pod pressure for primary shape po accidental running over go np. truck forklift. hose is light and easy for handling. hose designed primarily for unloading milk with tankers. Nie recommended for heavy conditions use in use process. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German institute ensuring quality and certification. Inner layer: white mixture NR/NBR. Reinforcement: braid synthetic, spiral PET. Outer layer: blue rubber synthetic. pressure working: 16 bar. Vacuum: 0.7 bar. Operating temperature: from -30°C to +85°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for transferring substances food, demanding use rubber free of smell and taste. Nie contains phthalates and bisphenol A. Layer inner with NBR/PVC resistant na used standard in industry food agents and processes cleaning. appropriate for milk and its products and fatty substances food. wide used in industry food in standard conditions use. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber NBR/PVC. Reinforcement: braid synthetic, spiral steel. Outer layer: blue rubber synthetic. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -15°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and very flexible and flexible hose delivery of reinforcement two braids steel intended for conducting steam saturated o higher pressure. Layer inner resistant na steam o high temperature. Layer outer resistant na high temperature and conditions atmospheric. Do steam water use special fitting screw-together screws intended for steam water – precisely selected for diameter and wall thickness hose. in order to elongation service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: double braid steel. Outer layer: red rubber EPDM, micro-perforated. pressure working: 18 bar. Operating temperature: from -40°C to +210°C (momentarily up to +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner with UPE resistant na most aggressive chemicals, antistatic (R 6 Ω), compliant with requirements for hoses food, smooth, o low coefficient friction during flow, protecting deposition medium na walls. facilitates to significantly cleaning and allows na use also in industry cosmetic, pharmaceutical and food. Reinforced with synthetic cord and steel spirals. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant na abrasion, ozone, conditions atmospheric, fire-resistant. compliant with requirements EN 12115:11 type Ω/T, completely antistatic - ensures discharge charges electrostatic also through wall hose (R 9 Ω). allows to use hose in zones hazard explosion. hose wide used for many applications in industry chemical. standards and requirements: hoses chemical: EN 12115:2011 (type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, C, D2). installing: should use fitting with a spigot ("a tail" for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with UPE. Diameter spigot should be precisely matched for diameter hose in order to ensuring tightness. installing sleeves clamping or clamps shell. confirmation resistance and conditions use requires contact with Tubes International, in particularly for temperatures above 50°C. Inner layer: black polyethylene UPE. Reinforcement: cord textile, spiral steel. Outer layer: black rubber EPDM. pressure working: 16 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery intended for transferring liquid products industry petrochemical containing for 50% carbon aromatic, fuels, gasoline, oil drive, heating, oils lubricating itp. Layer inner with black, smooth, antistatic (dissipating charges electrical 10 4 Ω 9 Ω) rubber NBR. Reinforced with synthetic cord and steel spirals. Layer outer with black rubber NBR, resistant na oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for transferring fuels or other compatible media in typical conditions use. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spirals steel. Outer layer: black rubber NBR. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery RIG STAR D and suction - delivery RIG STAR SD intended is for transferring and transfer oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (for 50% compounds aromatic). can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. has copper cable ensuring continuity electrical between fitting hose. Layer outer with rubber chloroprene CR, flame-retardant, resistant na abrasion, ozone, water sea and conditions atmospheric. designed as specialized hose OFFSHORE for operation na platforms drilling. wide used na platforms sea northern. can be with success used in use land. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spiral steel. Outer layer: black rubber CR. pressure working: 20 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for transferring fuels and liquid products industry petrochemical, containing for 50% compounds aromatic, m.in. gasoline, oil drive and oil mineral. can be used for tankers, tanks, stations loading, equipment industrial. hose wide used in industry and transport in standard conditions use. Layer inner with smooth, black, antistatic (R 6 Ω/m) rubber NBR. Reinforcement cord synthetic and spiral steel. has two cable copper ensuring continuity electrical between fitting hose – pod a condition correct connection for ends. Layer outer with black rubber SBR/NBR, antistatic (R 6 Ω/m), resistant na abrasion, oil, ozone and conditions atmospheric. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spiral steel. Outer layer: black rubber SBR/NBR. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C (for +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft and flexible hose delivery o reinforcement textile intended for conducting steam saturated. Layer inner o sound resistance na high temperature and steam saturated. Layer outer resistant na temperature, abrasion, conditions atmospheric and ozone. hose wide used in industry for low-pressure steam saturated – for light applications. For water steam, use special fittings bolted with screws, intended for water steam. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: synthetic cord. Outer layer: black rubber EPDM, micro-perforated. pressure working: 6 bar. temperature use: from -40°C to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum, resistant na UV and ozone. compliant with requirements 1935/2004 CE, FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopeia 3.1.9, BfR XV, Journal Officiel Brochure 1227. At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. factor safety is 4:1. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral steel (AISI 316). Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. The inner layer of the hose is extruded. compliant with requirements with FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV, Journal Officiel Brochure 1227 and directives CE 1935/2004. maximum vacuum 736.6 mm Hg (0.98 bar). At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral of steel AISI 316. Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose delivery made in accordance with technology improvement platinum. The inner layer of the hose is extruded. compliant with requirements FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV A, Journal Officiel Brochure 1227 and directives CE 1935/2004. At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester. Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction-delivery intended for water, juices, beverages and other products food, reinforced has been spiral with hard PVC, through co hose gained also na lightness. additional resistant na impact spiral, ensures good strength na vacuum and kinking hose. transparent wall whereas, facilitates easy control visual flow medium, a no phthalates in material, use hose for transferring milk and its products and alcohols o concentration for 50%. not recommended is for oils and fatty substances food. smooth surface inner reduces losses flow and ensures ease cleaning. outer surface also smooth, facilitates installing ends using bands or straps, reduces damage external in result abrasion and facilitates maintaining hose in cleanliness. as hose reinforced only spiral with hard PVC, nie having braid, pod pressure undergoes certain elongation, co should take into account in use, particularly in temperatures above 40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Material hose: transparent PVC. Reinforcement: spiral with hard PVC. pressure working: from 5 bar to 7 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible pressure hose delivery general purpose. used for air, water, light chemicals and liquid and semi-liquid products food such jak water, juices, beverages, beer, wine, alcohols o concentration for 50% (and for 20% for hoses o index SO-PVCSTAR-CR). Not recommended for food substances containing fats and oils. is suitable for milk and its products (nie is suitable for milk and products milk hose o index SO-PVCSTAR-CR). free of phthalates. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1). Dla hoses o index SO-PVCSTAR-CR: 1) general: EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). Material hose: transparent PVC. Reinforcement: braid polyester. pressure working: from 8 bar to 22 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for water, juices, beverages, alcohols o concentration for 50% (and for 20% for hoses o index SO-PVCSTAR-MS), and other products food. Not recommended for food substances containing fats and oils. is suitable for milk and its products (with railway nie is suitable for milk and products milk hose o index SO-PVCSTAR-MS). Reinforcement spiral with wire steel, embedded in wall, PVC, ensures good resistance na vacuum and kinking hose. smooth surface inner reduces losses flow and ensures ease cleaning. transparent wall allows na easy control visual flow. at the absence direct contact with food (in industry, construction, agriculture) can be used for light chemicals, water, sludge and sewage, other liquids (without fat, oils and carbon). as hose without braid is characterized certain elongation pod pressure. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Dla hoses o index SO-PVCSTAR-MS: industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Material hose: transparent PVC. Reinforcement: spiral steel galvanized. pressure working: od 6 bar for 11.5 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, flexible and almost smooth inside hose intended for extraction and transferring dusts, powders, granulates, grain, flakes and similar light materials o properties abrasive. thanks to made with polyether–polyurethane has good resistance na abrasion, ozone, conditions atmospheric, hydrolysis and corrosion biological. is suitable for contact with food in the scope transferring bulk and liquid materials food, in this fatty or oily. Nie recommended for milk and its products. Reinforcement spiral with hard PVC ensures good resistance na crushing. version antistatic hose has copper cable anti-electrostatic embedded with outer side hose along spiral reinforcing. effective grounding cable ensures sufficient for many applications level discharge charges electrostatic. used in particularly in industry agricultural–food, plastics, materials construction itp. hose WIND STAR PU is compliant with the European requirements 10/2011/EU (simulants A, B, C, D2 and E), and American FDA 21 CFR 177.2600 „d”, „e”, „f” (dry, liquid-water, fatty). information additional regarding applications food and pharmaceutical – see section „hoses for products food”. Material hose: transparent polyether- polyurethane. Reinforcement: spiral with hard PVC. Operating temperature: from -40°C to +80°C (pressure working dependent od temperatures).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for transferring and transfer oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (for 50% compounds aromatic). can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. Reinforcement layers strength cord synthetic. has copper cable ensuring continuity electrical between fitting hose. Layer outer with rubber chloroprene CR, flame-retardant, resistant na abrasion, ozone, water sea and conditions atmospheric. designed as specialized hose OFFSHORE for operation na platforms drilling. wide used na platforms sea northern. can be with success used in use land. Inner layer: black rubber NBR. Reinforcement: cord synthetic. Outer layer: black rubber CR. pressure working: 20 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for transferring liquid products industry petrochemical containing for 50% carbon aromatic, fuels, gasoline, oil drive, heating, oils lubricating itp. Layer inner with black, smooth rubber NBR. Reinforcement cord synthetic. has cable copper ensuring continuity electrical between fitting hose – pod a condition correct connection for ends. Layer outer with black rubber NBR, resistant na oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for transferring fuels or other compatible media in typical conditions use. Inner layer: black rubber NBR. Reinforcement: cord synthetic. Outer layer: black rubber NBR. pressure working: 10 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details
Hose high quality resistant to most demanding conditions use. exceptionally flexible, light and convenient in use. suitable Wall thickness and braid ensures retention shape cross-section hose. antistatic Layer inner guarantees safety at use in zones hazardous. intended for gases medical in accordance with the standard EN ISO 5359. Inner layer: black, antistatic PVC R 6 Ω/m. Reinforcement: a polyester braid. Outer layer: PVC in various colors for markings purpose hose for defined kinds medium – blue (nitrous oxide nitrogen), white (oxygen), yellow (vacuum), black-white (air). Working pressure: 15 bar. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible hose intended for discharge air, vapours oil and fuels, dust, dusts, very fine sawdust, chips and light bulk materials. Dla all types industry, in particular often used for dedusting and discharge vapours and fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, in version AS with polyether resistant also on microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P2 PU – version with polyester - polyurethane, o very sound resistance to abrasion; P2 PU AS – version antistatic (R ≤10 8 Ω, compliant with TRBS 2153, for extraction also with TRGS 727), made with polyether - polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P2 PU), polyether – polyurethane (P2 PU AS). Wall thickness measured between the spiral: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong industrial hose delivery for water and for compressed air, intended for use in heavy conditions in industry, construction ways, a even in quarries. Layer inner resistant to mist oil. resistant to abrasion and conditions atmospheric. commonly used and proven in various use industrial. hose Available in colour black and yellow. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic. Outer layer: black or yellow EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, flexible hose with rubber silicone vulcanized platinum. used in industry pharmaceutical, cosmetic and biotechnology, equipment medical, culture cells, sterile lines filling, for water for injection (WFI), in chemistry and analyzers blood, in chromatography liquid. can be used in pumps peristaltic – moderate service life. is characterized exceptionally smooth surface inner prevents deposition and adhesion contamination inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, nie toxicity, nie hemolyticity and nie pyrogenicity ensures total cleanliness liquids we sensitive use. meets requirements hygienic American FDA 21 CFR 177.2600, NSF-51, 3-A and USP Class VI and ISO 10993 for contact with blood, fluids body and tissues for 30 dni. possible sterilization steam (30 min, 1 bar, 121°C), oxide ethylene or radiation (for 2.5 Mrad). Length of a full hose roll 15 m. hose Available in sizes inch and metric. pressure working determined relative to pressure bursting at factor safety 1:5. Material: silicone (platinium). Maximum operating temperature: +204°C. temperature brittleness: -80°C. Hardness: 50° Shore (A). Density: 1.14 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality thin-walled hose type BARRIER for flow freon in single braid polyester for use in automotive and industrial systems air-conditioning and refrigerant working based on freon R134a, R1234yf, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to abrasion and conditions atmospheric. standards: SAE J2064 type C Class I. Inner layer: black rubber CR divided layer nylon (PA). Reinforcement: a polyester braid. Outer layer: black rubber CIIR, micro-perforated. Working pressure: 35 bar. Operating temperature: od -35°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE), black – white type MARBLE (marbled), smooth, antistatic (R 6 Ω). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE type MARBLE is also compliant with requirements for hoses food, is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic and spiral steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type Ω/T, completely antistatic (R 9 Ω) - ensures discharge charges electrostatic also through wall hose, co allows na use we all zones hazard explosion. standards and requirements: hoses chemical: EN 12115:2011(type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. atmospheres explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. assembly: should use fitting with a spigot („tail” for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white-black polyethylene UPE. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white-black polyethylene UPE. Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPDM. pressure working: from 12 bar to 16 bar - depending on diameter hose. temperature use: from -35°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, strong and very flexible rubber hose delivery, intended for air, water and light chemicals. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer antistatic (R 9 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C (momentarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE FX is optimal solution in use industrial, when required are large flow rates, resistance chemical and temperature, resistance na penetration. perfectly is suitable for conveying substances chemical, fuels, oils, paints, solvents, adhesives, dyes, gases and steam water, detergents, water and substances food. at temperature use above +160°C maximum pressure working given in table should reduced o 1% na each 1°C above tej temperatures. for example at temperature 180°C maximum pressure working for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. W case, when a hose PTFE flows substances, which is poor conductor and has potential properties electrification, charge electric will accumulated na internal surface PTFE and to avoid problem electricity static is used antistatic AS variant PTFE. antistatic teflon in version AS contains appropriate distributed in PTFE graphite and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). Material hose: inside smooth, externally Serrated PTFE (teflon) - natural white and antistatic - black. Reinforcement: braid of steel AISI 304. pressure working: from 50 bar to 110 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installations, chemicals, paints, adhesives, fuels liquid and gas, oils, greases, air, gases, water, steam and liquids na base water. used we all types industry. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. can be used also as mechanical guiding cables or tie rods of regard na low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material hose: smooth PTFE (teflon). hardness Shore (D): 58. temperature use: from -200°C to +260°C. pressure working: od 2.3 bar for 10.8 bar - depending on diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hose delivery, of reinforcement steel, intended for conducting steam superheated. Layer outer resistant na high temperature and conditions atmospheric. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black or red rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsARMORVIN HNA to hose suction-delivery intended for conveying juices, drinks, milk, water, wine, beer, alcohols with a concentration up to 50% and other products food. not recommended for greasy substances such as oils. except for intended use food, can be used between other in industry, construction czy agriculture, for light chemicals, dirty water, sludge, sewage and other liquids not containing fats, oils and hydrocarbons. is suitable also for air, a embedded in wall hose steel spiral allows use go for vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk. at this kinds substances, should take into account abrasion resistance and any problem electricity static. smooth surface inner reduces losses flow and ensures ease cleaning. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 7 bar - depending on the diameter hose. vacuum at 20°C: from 0.7 bar to 0.85 bar - depending on the diameter hose. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPliable and flexible, easy in handling hose suction-delivery intended for conveying greasy and non-greasy substances food, requiring the use of rubber free of odour and taste. Contains no plasticisers, phthalates or substances of animal origin. Layer inner with NBR resistant to used standard in industry food agents and processes cleaning. Layer outer resistant to momentary contact with fats animal and vegetable. especially recommended for applications demanding small radius bends at sound strength on pressure and vacuum. Widely used in industry dairy and for handling milk in ordinary conditions use. not recommended for applications transfer in heavy conditions use and at pressure pulsating. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards, RAL (German institute ensuring quality and certification). Inner layer: white NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft and flexible hose for applications laboratory and food. ideal for equipment analytical, condensers, incubators, desiccators, as lines for gases and drainage. Do products food and biopharmaceutical. used often also for cooling processors computers. glassy smoothed, free of pores surface inner prevents deposition and adhesion contamination inside hose and facilitates its cleaning. total repeatability parameters hose we all batches. can be used for pumps peristaltic, ale service life nie is large. hose free of is phthalates and BPA (bisphenol A). meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, 3-A, USP Class VI, Japanese #370/1959. possible sterilization steam, oxide ethylene or radiation. compliant with REACH and California Proposition 65 – nie contains substances hazardous and banned. Length of a full hose roll 15 m. Available version VACUUM o thicker walls for applications vacuum. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -46°C. Hardness: 56° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon type BARRIER (thick-walled) intended for automotive and industrial systems refrigerant and air-conditioning working based on freon R134a, R12, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to oil, abrasion and conditions atmospheric. standards: SAE J2064 type C Class II. Inner layer: black rubber CR, Layer nylon (PA). Reinforcement: two braids polyester. Outer layer: black EPDM rubber, micro-perforated. Working pressure: from 17 bar to 24 bar, depending on the diameter hose. Operating temperature: od -30°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction – delivery hose, PVC intended for water and sewage. smooth wall inner, externally lightly Serrated. good resistance to external impacts and heavier conditions use. flexible in low temperatures. used in systems irrigation, tankers and vehicles sewage, for purification sewers and emptying septic tanks. Hose material: green PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 1.8 bar to 4.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness hose flexible of spiral reinforcing, intended for extraction and conveying bulk materials abrasive, granulates, chips, offcuts etc. used in various branches industry, in particular often used for discharge particles solid in industry plastics, wood, materials construction and metal. pliable and flexible, also in low temperatures. smooth inside, little compressible. dense and thick steel spiral coated white PVC ensures high parameters pressure, is resistant to corrosion and has good adhesion for material hose. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. versions: P3 PU – version standard, with polyester – polyurethane, very resistant to abrasion; P3 PU AS – version antistatic (R ≤10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, with polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis; P3 PU EL – version conductive electrically (R ≤10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in zones hazard explosion po carrying out analysis risk, made with black polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P3 PU), transparent polyether-polyurethane (P3 PU AS), black polyether-polyurethane (P3 PU EL). Wall thickness measured between the spiral: 0.8 ÷ 1.5 mm (depending on the diameter hose). Reinforcement: spiral with wire steel coated white PVC. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose welding for oxygen made acc. to standards ISO 3821. is characterized resistance on kinking and action conditions atmospheric. Not recommended for gases generated based on fuels, oils and gas LPG. Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: blue smooth rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, light, very flexible hose suction-delivery, intended for applications general-industrial for water and light chemicals, other liquids (without fat, oils and hydrocarbons). It can be used also for air, vacuum conveying dusts and powders – In that case the abrasiveness and the possible problem of static electricity must be taken into account. It can be used (at temperatures up to +40°C) for liquid and semi-liquid products food such as juices, drinks, beer, wine, alcohols with a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. Reinforcement spiral with wire steel, embedded in wall with soft PVC, ensures good resistance to vacuum and kinking hose. transparent wall allows on easy visual control of the flow. As a hose reinforced only with a steel spiral (without a braid), it shows a certain elongation under pressure, which must be taken into account in use, especially at elevated temperatures. hose METALFLEX PVC complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP) and FDA CFR 21 175.300 and 175.1210. Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent, soft PVC. Reinforcement: galvanised steel spiral. Working pressure at a temperature of 20°C: from 1 bar to 9 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -10°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFree of braid version TO ( Tube Only ) hose HYPERLINE, externally spirally serrated (clockwise), a in center smooth. hose combines advantages flexible hose serrated and hose smooth o unobstructed notches flow. standard version made is with natural, semi-transparent PTFE, co allows visual control flow. version antistatic AS with PTFE with addition carbon (black) ensures discharge and dissipation charges electric for substances and conditions hazard electricity static. Material hose meets requirements FDA (21 CFR 177.1550 for hose standard, 21 CFR 178.3297 for antistatic). Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). can be used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents in conditions very low pressure. fitting can be mounted crimped ferrules tube of steel stainless. dependence pressure working od temperatures for hose PTFE HYPERLINE FX without braid, applies only for temperatures 150°C. above tej temperatures occurs drop pressure working and vacuum. assuming use hose above these temperatures should to take into account and carry out appropriate test in conditions use. available versions: standard and antistatic. Material hose: PTFE (teflon). temperature use: from -70°C to +150°C (up to +260°C - pressure working hose dependent od temperatures).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE SB (HYDRAFLON) has layer inner made with high quality seamless PTFE ensuring minimal porosity, maximum flexibility and resistance na vibration. braid made is with treated thermally wire of steel stainless AISI 304 o strength 1700 MPa. used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water, itp. - as well as for classic high-pressure hydraulic oil installations. hose HYPERLINE SB is version hose SMOOTHBORE of wall o medium wall thickness and diameter internal adjusted for standard ends hydraulic; assembly using standard straight jaws clamping. W case when identified is hazard electricity static (danger formation and accumulation charges electric, should use hoses HYPERLINE SB, in version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE graphite) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. at temperature use above +130°C maximum pressure working should reduced o 0.75% na each 1°C rise temperatures. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. pressure working: from 80 bar to 350 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning and rinsing installations and machine in industry food steam water and hot water. Layer inner meets requirements FDA 21 CFR 177.2600 and BfR XXI kat.2. Layer outer resistant na fats vegetable and animal. hose high quality, commonly used for cleaning and rinsing hot water or steam installations and machine in industry food (np. dairies, industry meat). Note: nie should use hose simultaneously for water and steam water. For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. length standard rolls: 60 m (or 120 m - contact with Tubes International). Inner layer: white rubber butyl. Reinforcement: synthetic cord. Outer layer: blue rubber NBR/PVC. pressure working: 6 bar (10 bar - for water). factor safety: 10:1 (3:1 - for water). temperature use: from -30°C to +165°C (from -30°C to +95°C - for water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose for propane - butane and gas natural. Meets the requirements of standards ISO 3821. Inner layer: black NBR rubber. Reinforcement: two braids textile. Outer layer: orange EPDM rubber/SBR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon o high diameter intended for automotive (especially trucks and buses) and industrial systems refrigerant and air-conditioning working based on freon R 134a and R404a and oils mineral and synthetic PAG and POE. Layer outer resistant to oil, abrasion, high temperature and conditions atmospheric. standards: SAE J2064 type B (dimensions SAE 100R5). assembly: use bolted or crimped fittings special. Inner layer: black rubber IIR. Reinforcement: a steel braid. Outer layer: black rubber CSM, micro-perforated. Working pressure: 35 bar. Operating temperature: od -40°C up to +125°C.
