Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand-operated lever grease gun 75/PK silver 500 g. with hose Ø 11 mm and hydraulic nozzle. Body material: steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality sapphire nozzle for high-pressure devices. Maximum working pressure: 3000 bar. Operating temperature: up to +150°C. Tightening torque [Nm]: max. 25.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMuffler with MWSVE throttle and external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the muffler, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the muffler, averages 25 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Spring material: stainless steel. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting "T" with external BSPT thread type B7 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped "T" fitting with external BSPT thread type C7 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the end and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP threaded tee for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPSAF clamping sleeve for UHP thermoplastic hoses. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality general-purpose worm clamp designed for quick and easy fastening of industrial hoses. Manufactured in accordance with the requirements of DIN 3017 standard and RoHS directive 2002/95/EC. The ASFA-S clamp with a band width of 12 mm features greater strength and a higher permissible tightening torque compared to the ASFA-L clamp (9 mm), ensuring a stronger grip and is recommended for heavier applications. The unique worm mechanism in a compact housing and the cold-extruded thread in the band, smooth on the inside, provide a secure multiple clamping of the clamp without damaging the hose surface. Material: galvanized carbon steel (W1).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality universal hose designed for air, cold and hot water, oil, hydraulic fluids, light chemicals, diluted acids, cleaning fluids. Strong and flexible, resistant to twisting and kinking. Non-soiling outer layer, weather-resistant, abrasion-resistant, and oil-resistant. Due to its high durability and low elongation, it is particularly recommended for drum reels. The hose is non-conductive (R > 1 MΩ per inch of hose length at 1000 V DC). Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: blue (red for diameter 15.9 mm) Chemivic® rubber blend (NBR/PVC). Working pressure: 21 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, strong, and flexible hose made of polyester-polyurethane, free of plasticizers, exceptionally resistant to abrasion and tearing, characterized by flexibility even at low temperatures and withstands cyclic temperature changes. The hose is produced with strict dimensional tolerances from batch to batch, ensuring safe, repeatable connections with fittings. Resistant to oils, greases, fuels, and a range of chemicals. Durable against weather conditions and intensive daily use. It is used in various industrial sectors: fuel and lubrication systems, for cooling fluids in automotive applications, for air in pneumatics and industrial automation, for the transfer of abrasive and viscous products, sludges, and powders, as well as for electrical hose protection. Full hose roll length is 30 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: tygothane® - polyurethane-polyester (PU). Operating temperature: from -73°C to +79°C (temporarily up to +93°C). Brittleness temperature: -73°C. Hardness: 82° Shore (A). Density: 1.20 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the transmission of various chemical substances, mainly for acid solutions, bases, ketones, aldehydes, industrial alcohols, and glycols. Basic, classic rubber chemical hose. Frequently used in industrial plants and wastewater treatment facilities for discharging contaminated water and process water. Also suitable for seawater. Inner layer made of antistatic (R ≤ 10^6 Ω/m) EPR rubber (other designation: EPM). Reinforcement made of high-strength cord. Outer layer made of antistatic (R ≤ 10^6 Ω/m) EPR (EPM) rubber resistant to chemicals, abrasion, ozone, and weather conditions. Both inner and outer layers are antistatic. Inner layer: black EPM (EPR) rubber. Reinforcement: synthetic cord. Outer layer: black EPM (EPR) rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for washing with cold and hot water as well as light chemicals. Recommended for use in the food industry. Compliant with European regulations for food substances 1935/2004 CE and 2007/19/CE (simulated fluids A, B, C). Compatible with TR-THERMO-12-BZ130-08-SS and TR-THERMO-12-BZ140-08-SS fittings. Inner layer: gray, smooth PVC. Reinforcement: double polyester braid. Outer layer: blue PVC. Working pressure: 80 bar. Operating temperature: from -10°C to +80°C (for 80 bar up to +50°).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium thickness, strong and flexible hose designed for the removal of sawdust, chips, shavings, light bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial fields. Antistatic and flame-retardant, it ensures high work safety. Less flexible and compressible than SMARTFLEX® 0.4, 0.6, and 0.7, but smooth inside, flexible even at low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticizers. Resistant to oils and gasoline. The optimal direction of medium flow is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special order. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ωm, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – according to DIN 4102 class B1. Wall thickness measured between the spiral: 1.0 mm. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Enhanced hose lifespan compared to the standard confirmed by a test of 1,000,000 impulse cycles. Outer layer is flame-resistant (MSHA). Standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 180 bar to 460 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C (temporarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on hose diameter). Operating temperature: from -10°C to +80°C. Standard: DIN 73378.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, lighter than rubber, suction and discharge hose designed for the transport of water, sewage, sludge, and dry bulk materials. Used in irrigation systems, loading and unloading of tankers, in industrial installations, etc. Maintains high flexibility at low ambient temperatures. The smooth inner and outer wall facilitates hose cleanliness and increases discharge efficiency by 20%. It is resistant to weather conditions and abrasion. The hose is also available in straight, non-curved sections of 3 to 6 m. Inner layer: black PVC. Reinforcement: polyester braid, galvanized steel spiral. Outer layer: black PVC. Working pressure: from 5 bar to 16 bar - depending on the hose diameter and temperature. Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible suction and discharge hose designed for water, juices, beverages, beer, wine, alcohols with a concentration of up to 20%, and other food products. Not recommended for milk and its derivatives, oils, and fatty food substances. Reinforced with a hard PVC spiral, impact-resistant, providing good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of flow. The smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is slightly corrugated. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk substances (non-fatty). Abrasiveness and potential static electricity issues should be considered. Standards and requirements: Food industry, contact with food: compliant with European regulations 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: hard PVC spiral. Working pressure: from 2 bar to 7 bar, depending on hose diameter. Operating temperature: from -10°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made according to hydrogen peroxide enhancement technology. Resistant to UV radiation, oxygen, and ozone. Widely used in industry and household appliances. Sterilization by steam, ethylene oxide, or radiation. Meets FDA and BfR requirements. Material: translucent silicone. Hardness: 57° Shore (A). Density: 1.15 g/cm³. Operating temperature: from -50°C to +200°C (temporarily +220°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert clamp DIN 3015 type 101 manufactured according to DIN 3015 standard. For size group 0, there is one hole for a screw; for size groups 1 to 6, there are two holes for screws. It standardly features a profiled (grooved) surface for the pipe hole. Insert material: self-extinguishing polyamide. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° WEO plug with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. After connection, the plug has freedom of movement in the socket, which prevents the hoses from twisting during installation. Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 116 quick coupling plug with external thread without valve intended for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1500 bar (connected coupling). Burst pressure: 3000 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1/2" with external thread, for Heavy Duty gun. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFoam generator LS 3 for pressure devices intended for touchless washing. The 1 l tank made of polyethylene is equipped with a brass injector for foam production. Nozzle diameter: 1.25 mm. Working pressure: 180 bar. Max. flow rate: 20 l/min. Operating temperature: +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for CAMLOCK DC coupling made according to the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the size of the coupling. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality two-way ball valve type SKH with BSP internal thread, designed for high-pressure hydraulic and industrial installations. To properly select the valve for media other than hydraulic oil and for high temperatures, please consult Tubes International. Working pressure depends on the sealing material of the valve. Material: steel (body, ball, stem). Seals: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: from -40°C to +100°C (POM); from -200°C to +250°C (PTFE); from -20°C to +100°C (NBR); from -20°C to +200°C (FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLow-pressure HAMMER LUG coupling type 100 for general applications. Widely used for the transmission of air, water, oil, and gas. Set: male part, female part + nut. Color: yellow (male, female parts), black (nut). Material: carbon steel A105. Connection: GW NPT. Sealing: metal/metal (cone). Pressure: 1000 PSI (69 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with external trapezoidal thread compliant with DIN EN 12713 standard and internal thread. The trapezoidal threads standardly equipped on IBC connectors are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO socket-plug connector for use in hydraulic systems for mining. Material: automatic steel, galvanized. Sealing: NBR (o-ring), Teflon (back-up ring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with internal thread, type R2, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external and internal BSP thread type A4/Z, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is used; for a cylindrical thread, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details30 mm coil for PIV.B valves. Insulation class: F180. Voltage tolerance: -10% to +15%. Protection degree: IP65 EN60529 with coupling.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket NiTO made of AISI 316L stainless steel with external thread. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., socket 1/2″ with plug 3/4″. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry-mate disconnect socket with internal thread made of AISI 316 stainless steel. Used in the chemical, pharmaceutical, agricultural industries, and handling systems. Not intended for gas media. Installed on the hose side (hose part). The socket design is based on a ball valve, which ensures completely unobstructed flow. The socket is supplied with polypropylene caps. Connection material: body - AISI 316 steel, CAMLOCK latches - AISI 316 steel. Sealing: valve - PTFE, connection - viton (EPDM and Kalrez available). Working pressure: up to 7 bar. Operating temperature: up to 150°C. Maximum leakage: 1 ml (1") and 2 ml (1.1/2" and 2").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible delivery hose, flat-foldable, for water to hydrants and equipment used by fire services. Supplied with mounted aluminum STORZ type fittings (complete hose), compliant with the technical conditions of the MSWiA Regulation of April 27, 2010, and has a CNBOP-PIB approval certificate. The hydrant hose complies with the EN 14540 standard and is used in internal hydrants according to EN-671-2. The pump hose is used for fire pumps, rescue pumps, and forestry services. In addition to fire-fighting functions, it is widely used in industry, construction, agriculture, and mining. Also available in a yellow luminescent version (DN52, DN75, 20m, for pumps). It can be used for the transmission of water, seawater, industrial water, and solutions of certain chemical substances. Inner layer: PVC insert (PU for DN110). Reinforcement: polyester braid. Working pressure: from 12 bar to 15 bar - depending on the hose diameter. Operating temperature: from -30°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with 11/16″-18 UNF thread allowing connection of the fitting to type 2HG or 2HL Hansen Beverage quick coupling. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with external NPTF thread, sealing on the thread using Teflon tape or liquid sealant (AGN). Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight ORFS INTERLOCK fitting with internal UNF thread, flat sealing, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with external BSP thread and flat sealing. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
