Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGAR series GA regulator with internal BSP thread, manually adjustable, maintains a constant pressure value at the outlet, regardless of fluctuations in pressure before the valve. The package includes a mounting bracket and a pressure gauge. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: from -20°C to +70°C. Connection: BSP 1/8" to 1". Flow rate: 1400 l/min - size 200, 2100 l/min - size 300, 5000 l/min - size 400, 6800 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle "Y" adjustable tee with external thread, type R25, intended for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtremely lightweight, flexible water delivery hose designed for internal fire protection of buildings. The inner layer is made of high-quality synthetic rubber. The outer layer consists of a strong, dense polyester braid reinforced with a thin, tightly wound PET spiral. The hose is used in internal hydrant cabinets with a length of 20 m to 30 m of hose wound on a drum (reel) with a nozzle mounted at the end of the hose. Compliant with EN 694 standard for fire hoses (type B class 5). In the field of fire protection (Poland), it has a CNBOP-PIB compliance certificate. It can also be used in industry - for seawater, industrial water, and some light diluted chemicals, as well as for air, dust, and light solid particles. It is not intended for use in harsh external conditions. Installation with clamps or crimping sleeves on ends with smooth, sharp-free fittings to avoid cutting the inner layer. Inner layer: smooth synthetic rubber. Reinforcement: polyester braid with a reinforcing spiral (thread) PET. Working pressure: from 7 bar to 12 bar - depending on the hose diameter. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, and elastic hose designed for the extraction of hot fumes, gases, dust, exhaust gases, cooling air, and blowing. Used in all areas of industry for high-temperature applications, particularly in machine construction, vehicles, engine equipment, aerospace, and military applications. Resistant to temperature, flame-retardant, and very mechanically durable. Characterized by excellent compressibility, a very strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Other diameters available upon special request in the range of 50 to 508 mm. Hose installation on couplings with bridge clamps (left-handed). Standard length: 3 m (also available in lengths of 6 and 10 m upon special request). Hose material: aramid fiber fabric internally impregnated with silver-gray silicone, 0.4 mm thick, externally green-gray. Reinforcement: type CLIP - external spiral made of galvanized steel wire and sheet metal, left-handed. Operating temperature: from -60°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for CO2 installation in industrial and marine fire protection systems. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -60°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft suction hose, for larger diameters and small thicknesses almost flat at rest, intended for pneumatic transport of dry bulk materials. Inner layer made of black, smooth, antistatic rubber (R < 106 Ω), abrasion-resistant (70±5 mm3 according to ISO 4649, formerly DIN 53516). Reinforcement with synthetic cord. Outer layer made of antistatic (R < 106 Ω) abrasion-resistant rubber, weather-resistant and ozone-resistant. The hose is primarily used for the transfer of cement, sand, gravel, silica, and other dry abrasive materials from rail tankers, road tankers, and silos. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord. Outer layer: black NR/SBR rubber. Working pressure: from 5 bar to 6 bar - depending on the hose diameter. Operating temperature: from -40°C to +70°C. Indices marked at the end with the letters XE have an inner layer made of high-abrasion-resistant antistatic rubber (abrasion 50 mm3 according to ISO4649) and with a copper wire.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug for water NiTO CLICK 3/4" with external thread. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved with an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connector, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with a front lever, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with internal BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, allowing for easy connection. Elements with the same hook spacing can be connected. Available in a forged version with a working pressure of up to 16 bar and in a cast version, characterized by significantly lower strength with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (forged connections), 6 bar (cast connections). Seal: white NBR rubber (forged connections), black NBR rubber (cast connections).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic partition nipple (high pressure) without nut, type A107, with external BSP threads (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHandy straight nozzle for compressed air with a lever, designed for removing all types of contaminants from surfaces: liquids, fine chips, shavings, etc. The lever design reduces operator fatigue and discomfort, even during prolonged use. Equipped with a standard nozzle with a hole diameter of 2 mm. Depending on the connection, we distinguish between a nozzle ending with a hose fitting of 6 mm and 9 mm diameter or a EUROSTANDARD 7.2 plug. Material: aluminum. Nozzle hole diameter: 2 mm. Maximum pressure: 8 bar. Operating pressure: 1 ÷ 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded nipple enabling the connection of quick couplings and UHP hoses to each other, as well as connecting to UHP connection blocks. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for safe and vibration-damping mounting of pipes, hoses, hose bundles, corrugated electrical installation pipes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has wide applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of galvanized carbon steel (W1), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The clamp does not include a screw, washer, or nut. Material: galvanized carbon steel (strip), EPDM rubber (flange). Strip width: 20 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality steam gun meeting safety requirements for working with steam. Equipped with a swivel connection for the hose. Available with a wide range of accessories – various types of lances and nozzles. Used for washing and cleaning equipment, surfaces, floors, and defrosting external equipment with steam. The steam supplied to the gun via the hose is redirected inside the gun to a shut-off valve before flowing out through the lance and nozzle. The ergonomically designed trigger reduces the force required to open the valve. Releasing the trigger automatically cuts off the steam supply, preventing unwanted leakage and potential accidents. The special thermal insulation of the gun (perforated stainless steel shield on thermally resistant plastic bridges) eliminates the risk of burns. The gun handle can be easily reassembled on the opposite side for use by left-handed operators (not included with the gun and must be ordered separately!). The gun is standardly equipped with a swivel connection, preventing hose twisting during operation. The gun is often used with a specialized steam valve – available upon request. Configuration selection of the gun in contact with Tubes International. Material: stainless steel (main components), thermally resistant plastic. Sealing: PTFE with fiberglass. Working pressure: 10 bar. Operating temperature: up to +180°C (temporarily up to +210°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external BSPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction coupling STORZ intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same coupling spacing can be connected. Available in forged version with a working pressure of up to 16 bar and in cast version, characterized by significantly lower strength with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (forged couplings), 6 bar (cast couplings). Seal: white NBR rubber (forged couplings), black NBR rubber (cast couplings).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSymmetrical 90° tee KTSB 90 designed for quick and efficient installation of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAF-THU clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinks suction and discharge hose designed for the transfer of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bend radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. Standard length: 60 m or 120 m. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose for pneumatic transport of dry abrasive substances. Special hose construction with exceptional abrasion resistance. The inner layer is smooth, made of black antistatic natural rubber with embedded alumina (Al2O3) ceramic balls, a material with high hardness. Built-in copper wire that, when grounded (connected to a grounded end), dissipates electric charges. The outer layer is corrugated, made of black antistatic (R<10^6Ω) SBR/NR rubber resistant to abrasion and aging. The hose is designed for transporting dry highly abrasive substances: e.g., dry cement, coal, coke, solid fuels from secondary raw materials, minerals, ceramic powders, steel shot, glass shards, fiberglass. Used in steelworks, coking plants, power plants, cement plants, mines, glassworks, abrasive material factories, and insulation material factories. An advantage is the long lifespan of the hose in these applications; a traditional abrasion-resistant rubber hose may work for only a few days, while the ALUSPHERE hose can last several months under the same conditions. Installation: The hose is designed for installation using the GHIBLI system - aluminum half-flanges PN10 applied externally to the hose. Inner layer: ceramic balls embedded in black NR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NR rubber. Working pressure: from 8 bar to 10 bar - depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug for water NiTO CLICK 1/2" with a dual hose coupling, allowing the installation of hoses with two diameters. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK A connector plug with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve with spring rod assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FR+L set is a combination of a filter-reducer and a lubricator. The filter-reducer consists of a standard air filter and a pressure reducing valve housed in one casing. The filter's task is to separate heavier fractions of air contaminants using centrifugal force, while the pressure reducing valve, thanks to the shaped diaphragm, ensures maximum sensitivity and precision of adjustment. It has additional connections at the front and back for connecting a manometer or fittings for reduced pressure. The lubricator is the most widely used solution for ensuring proper lubrication of actuating devices in pneumatic systems. It also features auxiliary connections on its rear and front surfaces for connecting a manometer, pressure sensor, or for additional air intake. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1, up to 13 bar for SY2, up to 10 bar for the RA drain. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Filtration degree: 5 µm, 20 µm, 50 µm. Oil tank capacity: 60 cm³ - SY1, 130 cm³ - SY2. Additional connection for manometer or fittings: BSP 1/8" for SY1 and 1/4" for SY2. Condensate drain: manual/semi-automatic (RMSA), automatic (RA). Flow rate: 1400 l/min - SY1, 4000 l/min - SY2, (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° fitting type LET-LOK® for inch tubing intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled plug connector, adjustable triple with external thread, type R52, intended for connections of wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction adapter with external and internal threads enabling the connection of quick couplings and UHP hoses, as well as connecting to UHP connection blocks. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A205 with internal BSP thread (seal on the thread) and external NPT thread (seal on the thread). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard nozzle with a central hole (available hole diameters 1.5 mm and 2 mm), characterized by a concentrated air stream with high blowing force. Noise level 90 dB at pressure above 4 bar. Connection: GZ M12x1.25. Material: aluminum. Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filter regulator) FR, SKILLAIR® series, without end plates, is a device consisting of a filter and a pressure reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size and type of discharge. Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Pressure gauge connection: BSP 1/8". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1600 l/min - series 100, 3000 l/min - series 200, 5600 l/min - series 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting for thermoplastic and hydraulic hoses intended for high-pressure gases with internal thread G-3/4" (3/4" - BSP), connection according to PN-81/M-69229 (DIN477-1 no. 9). Application: oxygen, carbogen. Material: Material: AISI 304 steel - fitting, brass - nut.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPZP12 or PZG28 scissors for cutting hoses and pipes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type LET-LOK® with external BSPT thread for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug-in distributor, type R42, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp sleeve for OBHR type Teflon brake hose. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAF-TH clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - locking diameter. Diameter D3 [mm] - inner diameter. Material: AISI 304 or 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard gasket for the female part (socket) of the CAMLOCK coupling. Material: black neoprene (also available in white - index suffix "-NF"). Operating temperature: from -50°C to +107°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible rubber hose for suction and transport of sand, gravel, cement, and other abrasive materials. Also used in cleaning systems and removal of abrasive material after abrasive blasting. The inner layer is smooth, made of wear-resistant rubber with a thickness of 3 mm. The outer layer is corrugated, resistant to abrasion and weather conditions. Reinforced with a steel spiral, it is resistant to kinking and vacuum. Designed for both suction and pressure work. It features a copper anti-static wire for discharging electric charges. Inner layer: black or brown natural rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black NR/SBR rubber. Working pressure: from 2 bar to 3 bar - depending on the hose diameter. Vacuum: up to 0.9 bar. Operating temperature: from -30°C to +70°C.
