Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBending lance type ST-85 designed for high-pressure washers. Smooth adjustment of the bending angle of the lance from 20° to 140° allows for cleaning hard-to-reach surfaces, e.g., vehicle undercarriages and roofs, tanks, etc. Connections: (inlet) GZ M22x1.5 / (outlet) GW 1/4" NPT. Working pressure: up to 210 bar. Operating temperature: up to +150°C. Material: stainless steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStorz cap chain preventing loss. The chain should be selected for the specific DN size of the cap. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAC mounting bracket for cylindrical actuator - RNDC series. Packaged individually. Actuator sizes: Ø32, Ø40, Ø50. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClaw for replacing individual working jaws in FINN-POWER presses type P20, P32 and FP type presses...
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight foam and spray gun with a flat nozzle (nozzle rotation capability) at low pressure - 2.5 bar (best effect at 3.5 ÷ 4 bar). Made of reinforced fiberglass polyamide PA66. Material: polyamide PA66. Trigger, spring, and valve stem made of stainless steel. Cover made of blue EPDM rubber. Sealing: EPDM. Connection (inlet): GW 1/2" BSP. Maximum working pressure: 12 bar. Maximum operating temperature: +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight foam and spraying gun for mounting lances and nozzles (outlet GZ 1/2" BSP) made of reinforced fiberglass polyamide PA66. Material: polyamide PA66. Trigger, spring, and valve stem made of stainless steel. Cover made of blue EPDM rubber. Sealing: EPDM. Connection (inlet): G 1/2" BSP. Maximum working pressure: 12 bar. Maximum operating temperature: +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel securing hose (for pressure hoses), coated with plastic. Cable diameter: 3 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDistribution rail with two opposing outlets for use in pneumatic systems, allowing for the separation of compressed air under pressure into several other branches. It has additional holes for securing it in the desired location of the installation. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLong 90° bend with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLong 90° bend with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMagnetic drain plug mounted at the bottom of the tank. It has a magnetic pin that attracts and retains ferromagnetic particles floating in hydraulic oil. This protects the moving parts of pumps, distributors, valves, etc. from damage, increasing their lifespan. Material: aluminum (body), alnico (magnetic pin), guarnital (fiber washer).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini actuators of the TP series, manufactured according to ISO 6432 standards, have covers made of high-strength plastic, while the cylinders are made of anodized aluminum. Available versions: with magnet or without magnet. Piston diameter: Ø 16, 20, and 25 mm. Working stroke: from 1 to 80 mm (with the possibility of ordering up to 500 mm). Working pressure: from 0.6 to 10 bar. Sealing: polyurethane. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini double-acting cylinder ISO 6432 STD, type 109 with cushioning, without magnet. It is designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance. The cylinder is made with a stainless steel sleeve. The dimensions of the outer covers for certain diameters have been reduced, allowing for installation in confined and restricted spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but only as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 16, 20, and 25 mm. Stroke: from 10 to 320 mm. Operating pressure: from 0.6 to 10 bar. Sealing: polyurethane, NBR, FKM/FPM. Operating temperature: from -10°C to +150°C depending on the seal used.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature quick coupling socket DN 2.7 with valve, with a corrugated hose end or with a plastic hose end, screwable clamping sleeve. Quick couplings are used wherever small installation dimensions are required, e.g., in medical technology, measurement, and laboratory applications. Interchangeable with RECTUS 20 and DN 2.7 quick couplings from other manufacturers with the same plug profile. Application: pneumatics (air, nitrogen, other non-flammable gases). Working pressure: 16 bar. Flow rate: 228 l/min, Pe = 6 bar, Δp = 1 bar (air). Operating temperature: from -20°C to +100°C. Material: nickel-plated brass, pins and spring made of stainless steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature quick-connect socket DN 2.7 with valve, with external or internal thread (metric or BSP), for use where small dimensions are important, e.g., in medical, measurement, and laboratory technology. Can be operated with one hand at pressures up to 8 bar. Interchangeable with RECTUS 20 and quick-connects DN 2.7 from other manufacturers with the same plug profile. Application: pneumatics (air, nitrogen, other non-flammable gases). Working pressure: 16 bar. Flow rate: 228 l/min, Pe = 6 bar, Δp = 1 bar (air). Operating temperature: from -20°C to +100°C. Material: nickel-plated brass, pins and spring made of stainless steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature quick-connect plug DN 2.7 with external or internal (metric or BSP) thread, without valve for use where small dimensions are important, e.g., in medical, measurement, and laboratory technology. Interchangeable with RECTUS 20 and quick-connects DN 2.7 from other manufacturers with the same plug profile. Application: pneumatics (air, nitrogen, other non-flammable gases). Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature quick-connect plug DN 2.7 with a corrugated hose end or a plastic hose end, with a screw clamp sleeve, without a valve, for use where small dimensions are important, e.g., in medical, measurement, and laboratory technology. Interchangeable with RECTUS 20 and quick-connects DN 2.7 from other manufacturers with the same plug profile. Application: pneumatics (air, nitrogen, other non-flammable gases). Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature RML type pressure reducing valve (threaded connection with O-ring at the inlet and plug connection at the outlet) designed to reduce higher pressure to lower pressure downstream of the valve. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature RML type pressure reducing valve (plug-in connection at the inlet and threaded connection with an O-ring at the outlet) designed to reduce higher pressure to lower pressure downstream of the valve. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini ball valve four-way double, manually operated (available on special order with electric or pneumatic control), with seamless internal BSP thread, made of PP, PVDF, and PFA. The PFA valve has a ball made of PTFE, while the other valves have balls made of the same material as the body. Due to the materials used, the valve exhibits excellent chemical resistance to many substances. Widely used in laboratories and development departments, analytical technology processes, chemical industry, etc. Material: polypropylene, polyvinylidene fluoride, perfluoroalkoxy. Sealing sleeve: PTFE. Maximum operating temperature: +90°C (PP), +140°C (PVDF), +180°C (PFA). Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual two-way ball valve (available on special order with electric or pneumatic control), with seamless BSP internal thread, made of polypropylene (PP), PVDF, and PFA. The PFA valve has a ball made of PTFE, while the others have balls made of the same material as the body. Due to the materials used, the valve exhibits excellent chemical resistance to many substances. Widely used in laboratories and development departments, analytical technology processes, chemical industry, etc. Material: polypropylene, polyvinylidene fluoride, perfluoroalkoxy. Sealing sleeve: PTFE. Maximum operating temperature: +90°C (PP), +140°C (PVDF), +180°C (PFA). Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini five-way ball valve with seamless BSP internal thread, manually operated (available on special order with electric or pneumatic control), made of PP, PVDF, and PFA. The PFA valve has a ball made of PTFE, while the other valves have balls made of the same material as the body. Due to the materials used, the valve exhibits excellent chemical resistance to many substances. Widely used in laboratories and development departments, analytical technology processes, chemical industry, etc. Material: polypropylene, polyvinylidene fluoride, perfluoroalkoxy. Sealing sleeve: PTFE. Maximum operating temperature: +90°C (PP), +140°C (PVDF), +180°C (PFA). Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual three-way ball valve (available on special order with electric or pneumatic control), with seamless BSP internal thread, made of PP, PVDF, and PFA. The PFA valve has a ball made of PTFE, while the other valves have balls made of the same material as the body. Due to the materials used, the valve exhibits excellent chemical resistance to many substances. Widely used in laboratories and development departments, analytical technology processes, chemical industry, etc. Material: polypropylene, polyvinylidene fluoride, perfluoroalkoxy. Sealing sleeve: PTFE. Maximum operating temperature: +90°C (PP), +140°C (PVDF), +180°C (PFA). Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual three-way ball valve (available on special order with electric or pneumatic control), with seamless BSP internal thread, made of PP, PVDF, and PFA. The PFA valve has a ball made of PTFE, while the other valves have balls made of the same material as the body. Due to the materials used, the valve exhibits excellent chemical resistance to many substances. Widely used in laboratories and development departments, analytical technology processes, chemical industry, etc. Material: polypropylene, polyvinylidene fluoride, perfluoroalkoxy. Sealing sleeve: PTFE. Maximum operating temperature: +90°C (PP), +140°C (PVDF), +180°C (PFA). Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for unleaded gasoline, diesel oil, and liquid fuels containing up to 50% aromatic compounds. Used in industry and transportation for the transfer and handling of petrochemical products, in tank trucks, at road and rail loading and unloading terminals for fuels. Inner layer made of black, smooth, antistatic (R ≤ 10^6 Ω) NBR rubber (NBR1). Reinforced with layers of high-strength cord. Equipped with two copper wires ensuring electrical continuity between the hose ends, provided that they are properly connected. Outer layer made of black, antistatic (R ≤ 10^6 Ω) synthetic rubber, self-extinguishing, resistant to abrasion, oil, ozone, and weather conditions. Wall resistance across the hose R ≤ 10^9 Ω (type M/T). Compliant with standards EN12115:11 (16 bar), EN 1761 (10 bar), ISO 2929 (10 bar), TRbF. Excellent resistance to petrochemical products, strong construction, and antistatic properties of both inner and outer layers, built-in antistatic wires, recommend this hose for demanding applications, including in explosion hazard zones. In any case, however, use in explosion hazard zones (ATEX) should be preceded by a risk analysis conducted by a specialist. A version without wire (type Ω/T) is available on special order. Inner layer: black, smooth NBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +90°C (temporarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong general-purpose PVC hose with specially reinforced wall and braid construction. Good resistance to kinking. Designed for water, air, and light chemicals in agriculture, horticulture, and industry. Inner layer: black PVC. Reinforcement: polyester braid. Outer layer: yellow PVC. Working pressure at 20°C: 10 bar. Operating temperature: from -5°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality with modern design, professional "premium" class air and nitrogen tire inflator – calibrated (* - available version without calibration); re-calibration after two years (directive 86/217/EEC). For cars, construction machinery, tractors, motorcycles, bicycles, airplanes. The robust, ergonomic body of the inflator is made of aluminum, with a corrosion-resistant surface. Tire filling occurs by fully pressing the lever, while air release is done by pressing the lever halfway. Equipped with a large and clear 80 mm analog manometer (accuracy class 1.0) in a polyethylene (PE-HD) shield, with a dual measurement scale (bar, psi). A 500 mm rubber hose with a swivel coupling to the inflator is used for connecting to the tire. Depending on the version, the hose is terminated with one of three types of fittings: lever, clamp, or double-sided plug (ideal for dual wheels). A proven solution for service stations, tire repair shops, and workshops. Replacement of the manometer results in the expiration of the inflator's calibration feature and necessitates a new calibration! Material of the inflator: aluminum (body, lever). Sealing: NBR, PU. Working pressure: 12 bar, 25 bar. Operating temperature: from -10°C to +40°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way branching module GA series G with internal BSP thread, used for air intake from any location of the FRL station. Supply pressure: up to 10 bar. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPA branching module, SKILLAIR® series, with end plates, is used for air intake from the FRL station at any stage of its preparation, regardless of the installation location. Size: 100, 200, 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: BSP thread 1/4" ÷ 1".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe distribution module is used when there is a need to draw air from the FRL Newdeal unit at any stage of its preparation, e.g., reduced air, oil-free air, or supply air. Size: 1/4", 3/8", 1/2", 3/4", 1". Connection: BSP female thread 1/8" for 1/4", BSP female thread 1/4" for 3/8" to 1/2", BSP female thread 1/2" for 3/4" to 1". Working pressure: up to 18 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBranching module - coupling mounted between two any SYNTESI® modules, used for independent air intake. Version 2 - two-way, has two connections (upper and lower). Size: SY1, SY2. Operating pressure and temperature: dependent on the SYNTESI® modules it is connected to. Flow: 1550 l/min - 1/8" (SY1), 7000 l/min - 3/8" (SY2), (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe branching module is a coupling mounted between any two SYNTESI® modules, used for independent air intake. It has 4 sockets for terminal connections on each plane. Size: SY1, SY2. Operating pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10°C to +50°C. Flow rate: 500 - 2000 l/min - SY1, 1500 - 4500 l/min - SY2, (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two sockets without a valve with a connecting tube. Designed for the DYROS system - series 6. Material: brass. Sealing material of the sockets: viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two sockets and a shut-off valve with a connecting tube. Designed for the DYROS system - series 30. Material: brass. Sealing material of the sockets: viton. Working pressure: 15 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two sockets and a shut-off valve with a connecting tube. Designed for the DYROS system - series 40. Material: brass. Sealing material of the sockets: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two sockets and a shut-off valve with a connecting tube. Designed for the DYROS system - series 6. Material: brass. Socket sealing material: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBridge with two sockets and a shut-off valve with a connecting tube. Designed for the DYROS system - series 90. Material: brass. Socket sealing material: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded BSP coupling, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for R12/R134 adapter protecting the valve from various contaminants and from refrigerant leakage from the system (adapter index: BU-7034/7036 or BU-7035). Material: polyamide.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUNF threaded nut for ORFS connectors. Material: carbon steel, galvanized.
