Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery for oils and fuels. lighter and more flexible than standard hoses rubber. flat at rest, co facilitates operation and storage. intended for conveying and handling products petrochemical, oils and fuels in refineries, industry and transport. used for refuelling vessels, cleaning tanks, applications firefighting and military. hose built is with high-strength braid polyester – polyamide, completely pressed in blend NBR/PVC. has copper cable ensuring continuity electrical between fitting hose – under a condition correct connection for ends. inner surface hose with NBR/PVC smooth, not causing losses flow, outer surface with NBR/PVC lightly longitudinally ribbed, co serves increasing resistance to abrasion and protection against contact with hot element. resistant externally on abrasion, ozone, conditions atmospheric, oil, fuels and wide range chemicals. Not requires cleaning and drying. resistant to loads longitudinal – during unwinding and pulling (force longitudinal not should never exceed 1/3 given force breaking, assembly ends should take into account force longitudinal). standard color green-grey (army green). Hose material: green-grey blend NBR/PVC pressed in braid polyester-polyamide in process extrusion hose. Working pressure: od 16 up to 20 bar - depending on the diameter a hose. Operating temperature: od -20°C up to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber formed hose without reinforcement, flexible and stretchable (na diameter) o special serrated shape, ensuring resistance na kinking at bending and possibility cutting na sections o required length. manufactured in sections o length 1 m, which can cut and easily molds in installation. Available in version basic, made with rubber EPDM, for water, liquids cooling, resistant na diluted acids and principles, na elevated temperature and ozone. Range temperatures use from -40°C to +135°C (TUBANO) and in version o elevated resistance outer na oil, made with other rubber synthetic. Range temperatures use from -30°C to +120°C (TUBANO OIL). Material hose: formed rubber EPDM. pressure working: 1.5 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, exceptionally soft and flexible, A universal hose laboratory free of phthalates (DEHP). excellent solution for complex installations equipment laboratory demanding small radii bends and repeated bends. Ten ultra soft hose is resistant na twisting and crushing and remains flexible in low temperatures (for -55°C). thanks to its softness nie requires large forces for compression consists ofc ideal solution for pumps peristaltic o low moment swivel or powered battery. is characterized greater service life in use in pump peristaltic od typical hoses silicone, having simultaneously good resistance chemical na range corrosion media (acids, bases, salts, alcohols). compliant with requirements FDA for contact with food and REACH. sterilization only oxide ethylene. Length of a full hose roll 15 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special, without DEHP). Maximum operating temperature: +52°C. temperature brittleness: -55°C. Hardness: 40° Shore (A). Density: 1.1 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal flexible rubber hose delivery, intended for air, cold and hot water and light chemicals (with the exception acids). resistant to acetates and ketones. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. hose o strong the structure and small elongation pod pressure. is suitable for use on drums. Layer inner electrically conductive (R 6 Ω, EN ISO 8031), Layer outer resistant to ozone and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA - alcohol polyvinyl). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery for demanding, versatile applications in industry food. excellent for conveying many types products food such as: olive oil, wine, beer, juices fruit, milk, fats and alcohols with a concentration up to 96%. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. Layer outer resistant to conditions atmospheric and ozone. standards and requirements : industry food, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, strong and flexible hose reinforced a braid, intended for higher pressures. made with polyether - polyurethane, free of plasticizers, exceptionally resistant na abrasion and tearing, is characterized small radius bending and flexibility even in low temperatures. withstands cyclic changing temperatures. resistant na oils, greases and fuels and range chemicals. found use in many branches industry: conveying products abrasive and viscous, sludge and pastes, conveying granulates and powders, lubrication and degreasing, for liquids cooling in automotive, for air in pneumatics and automation industrial. used in industry food and cosmetic - meets requirements FDA 21 CFR 177.1680 and FDA 21 CFR 177.2600 for contact with food and NSF-61 for use for water drinking (with limitation length hose depending od diameter). length full roll hose 30 m (od diameter internal 31.8 mm - 15 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: tygothane® - polyurethane - polyether (PU). temperature use: from -73°C to +82°C. temperature brittleness: -73°C. Hardness: 85° Shore (A). Density: 1.12 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning dry ice – granulate solidified dioxide carbon. cleaning dry ice used is for removing coatings, adhesives, deposits etc. in many fields industry. advantage process is no damage cleaned surface, no aggressive substances chemical, no water in process (in comparison for cleaning high-pressure water), no residue abrasive (in comparison with sandblasting). dry ice (solidified dioxide carbon) has temperature for -78.5°C (temperature melting), moulds granulate and in during process sublimates for the molds gas. hose DRY ICE designed is specially for conveying dry ice. Layer inner smooth, with antistatic rubber synthetic resistant to abrasion and low temperature. Layer outer antistatic, resistant to abrasion, conditions atmospheric and ozone. mounted with use quick couplings of specialist guns for cleaning dry ice. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -55°C up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery o smaller diameters intended for conveying wine, juices fruit, beer, water. It can be used for hose reels drum. completely free of components origin animal, phthalates, plasticisers and nitrosamines. highly resistant to processes cleaning and disinfection used in industry food. Layer inner free of taste and odour. Layer outer resistant to abrasion and aging. standards and requirements : industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA, D.M. 21/03/73, BfR II. Inner layer: white smooth technopolymer. Reinforcement: a synthetic braid. Outer layer: blue smooth technopolymer. Working pressure: 10 bar. Operating temperature: -20°C up to +80°C (momentarily up to +90°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, the highest quality flexible hose with rubber fluorine, resistant na solvents, fuels, oils, aggressive chemicals, also in conditions elevated temperatures. used for solvents cleaning (laundries chemical, systems recovery solvents), aggressive chemicals, acids and bases, hot oils and fuels. is suitable for pumps peristaltic. resistant na ozone, light solar and conditions atmospheric. opaque black wall hose secures completely substances sensitive na light. process production hose with annealing po vulcanization removes all residue and ensures minimal degassing, required in use vacuum and space. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: fluoroelastomer (FKM). Maximum operating temperature: +204°C. temperature brittleness: -51°C. Hardness: 60° Shore (A). Density: 1.90 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge and conveying most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical, petrochemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard HYTEF, black conductive foil PTFE PTFE - version antistatic HYTEF EL. Material hose Outer layer: black fabric polyethylene coated rubber CSM. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical hose intended for extraction and conveying aggressive chemical vapours solvents, paints, hydrocarbons, chemicals etc. thanks to conductive rubber FKM has properties anti-electrostatic (resistance surface R 6 Ω. very good resistance to oil, substances aromatic, most acids and chemicals. excellent resistance to elevated temperature. resistant to radiation UV and ozone. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. used in industry paint, chemical and paper. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for FKM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyester coated FKM, antistatic, externally black. Reinforcement: outer spiral with sheet and wire steel. Operating temperature: od -25°C up to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and o excellent flexibility hose intended for discharge vapours oils, dusts, light bulk materials. resistant to microorganisms and hydrolysis. meeting requirements FDA and directives European. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose fuel of special rubber NBR resistant to ester methyl acids fatty oil rapeseed (RME). Reinforcement synthetic a braid textile. Layer outer with rubber chloroprene CR, antistatic, self-extinguishing, resistant to abrasion, temperature and aging. especially recommended for biofuels, based on esters methyl acids fatty (FAME) e.g. biodiesel B10, B20, B100. resistant to ester methyl acids fatty oil rapeseed (RME). It can be used also for ordinary oil drive. Inner layer: special NBR rubber. Reinforcement: textile braid synthetic. Outer layer: rubber CR. Working pressure: 15 bar. Operating temperature: od -30°C up to +100°C (momentarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose intended for extraction and conveying materials abrasive: sand, gravel, rubbish, leaves and other contaminants. intended for use in cleaning streets, squares and ways. used in sweepers and other equipment services municipal and road. special The design hose P7 M STREET makes, that despite high wall thickness wall (1.4 mm) hose has smaller radius bends (1.2 x D) than standard hoses o tej wall thickness. folds hose between spiral at bending fold over on outside, co reduces resistance flow and wear. pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Wall thickness measured between the spiral. assembly on spigots hose clamps bridge (right-handed). Other diameters may be available on special order. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight transparent smooth hose with natural (non-regenerated) polymer fluorine PFA (perfluoroalkoxy), material o properties close for PTFE. hose is characterized excellent chemical resistance, stability temperature dimensions and shape, very smooth, free of micro-pores surface inner and external, high strength pressure and resistance na bursting caused excessive stresses. good transparency hose allows na easy observation level or flow. resistant na radiation UV. intended for low-pressure installations aggressive substances chemical or when required is high cleanliness and inert chemical material hose. used commonly in laboratories, industry chemical and pharmaceutical. Ze regard na excellent properties insulating (strength dielectric 3 ÷ 4 times greater od PTFE) used in industry electronic and semiconductors. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material hose: PFA. hardness Shore (D) 60. temperature use: from -200°C to +260°C. pressure working: od 7 bar for 19.5 bar - depending on diameter and wall thickness wall hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. sterilization steam (max. +135°C under pressure 3.5 bar through 30 min.). Layer inner Meets the requirements of FDA, USP kl.VI, D.M. 21/03/73 and regulation WE nr 10/2011. Layer outer meets requirements USP kl. VI, FDA and European Pharmacopoeia. hose compliant with EC 1935/2004 and 2023/2006/EC (GMP). free of substances origin animal, phthalates, adipates and materials subject restrictions the directive EC 1907/2006 (REACH). Safety factor 3:1. stated radius bends: refers to pressure static. pressure working (20°C): from 4 bar to 10 bar, depending on the diameter hose. Inner layer: white smooth fluoropolymer PFA. dynamic. Reinforcement: braids polyester, spiral of steel AISI 302. Outer layer: transparent silicone. Operating temperature: od -30°C up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, reinforced a braid polyester hose free of smell and taste, non-toxic, nie containing phthalates and BPA (bisphenol A). intended for conveying and dispensing products food pod higher pressure. smooth, non-porous surface inner hose eliminates problem settling particles product and growth bacteria. resistant na action alkaline agents cleaning. meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). compliant with REACH and California Proposition 65 - nie contains substances hazardous and banned. possible sterilization oxide ethylene. Po mounting ends o appropriate hygienic the structure possible is cleaning method CIP. Length of a full hose roll 15 m (od diameter internal 38.1 mm - 6 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling crude oil, petrochemical products and drill cuttings mixed with crude oil (up to 50% aromatic compounds). Layer inner with black, smooth blend rubber NBR/PVC. Reinforcement layers strength cord synthetic and spiral steel. It has copper wires ensuring electrical continuity between the hose ends – provided they are correctly connected to the ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to oil, water sea, abrasion and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on North Sea platforms, successfully used in onshore applications. On special order available also versions o higher pressure working (20 / 27 / 30 / 35 bar), with specified force breaking at tension (maximum for 2T for 2”, 4T for 3” and 7T for 4”, 5” and 6”) and with approval type ABS ( American Bureau of Shipping Type Approval ) for complete line. Inner layer: black NBR rubber/PVC. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: from 17 bar to 20 bar - depending on the diameter hose. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying fuels aviation (kerosene aviation, kerosene, e.g. Jet A1) and products industry petrochemical containing up to 50% compounds aromatic, mainly for draining fuels of tanks aircraft, loading and unloading airport tankers and dispensers fuels. Layer outer antistatic, resistant to abrasion, oil and conditions atmospheric. has copper cable ensuring continuity electrical (R ‹ 100 Ω) between fitting hose and discharge charges electrostatic. Compliant with the requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: od -25°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong hose suction-delivery for fuels aviation, intended for filling and emptying tanks aircraft, loading and unloading airport tankers and dispensers fuels. as hose without element metal It can be used for direct filling and emptying tanks aircraft. can be wound on drums. Suitable for aviation fuel for turbine engines (aviation kerosene, kerosene, e.g. Jet A1), aviation petrol and fuels with an aromatic hydrocarbon content up to 50%. Layer inner with black, smooth, rubber NBR. Reinforcement layers high-strength cord synthetic and spiral with plastic polymer (PET). Layer outer with black, antistatic rubber synthetic, resistant to abrasion, conditions weather and contact with oil. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. On special order available other diameter and hoses with fluorescent marking visible in night. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spiral PET. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: od -25°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose Hyperline FX SS AS SI WHITE to light, flexible hose PTFE. Ze regard na its properties recommended is for conveying hot media, applications CIP. hose can be delivered with meter, jak and in the molds complete lines. Layer outer in the molds white silicone facilitates maintaining cleanliness. such solution protects also the operator against burn. high resistance layer internal na long-term operation steam water. at temperature use above +160°C maximum pressure working given in data technical should reduced o 1% na each 1°C above tej temperatures. for example at temperature 180°C maximum pressure working for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. the given in data value vacuum, defined is for temperatures use up to 150°C. hose standard is in version antistatic, Available also in version with natural PTFE. Material hose: inside smooth, externally Serrated, antistatic PTFE (teflon). Reinforcement: single braid of steel AISI 304 with additional layer protective with white rubber silicone. pressure working: from 50 bar to 110 bar - depending on diameter hose. temperature use: from -70°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVersion hose PTFE SMOOTHBORE o thickened wall of specially processed PTFE (reduced micro-porosity) for applications with gases high-pressure and other substances penetrating, in double braid steel. at temperature use above +130°C, maximum pressure working given in parameters, should reduced o 0.75% na each 1°C rise temperatures. assembly: use fitting and ferrules series AF-TL... Material hose: smooth PTFE. Reinforcement: double braid of steel 304. pressure working: from 180 bar to 225 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose CHEMFLUOR TH is flexible a hose PTFE and intended is for high-pressure installations hydraulic, pneumatic and gas. Layer inner made with conductive PTFE prevents accumulation charges electrostatic. Material hose: black, conductive PTFE. Reinforcement: braid of steel AISI 304. temperature use: from -50°C to +200°C. pressure working: 345 bar. pressure bursting for 20°C: 1100 bar. pressure bursting for 200°C: 820 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The PTFE tube of the hose is extruded under strictly defined and controlled conditions, which ensures its highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. version thick-walled HW recommended is for heavier conditions use, gases (up to 100 bar) and for applications in which available cyclic changing temperatures use. braid made is with annealed wire of steel stainless AISI 304 o high strength na stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose pod high pressure. Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. - as well as for classic high-pressure hydraulic oil installations. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1; if a factor of 4:1 is required (np. acc. to EN 16643) should multiply values through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% na each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-HWDB-10 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: double braid of steel AISI 304. pressure working: from 40 bar to 350 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The PTFE tube of the hose is extruded under strictly defined and controlled conditions, which ensures its highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel stainless AISI 304 o high strength na stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose pod high pressure. double braid whereas, should use at higher pressures and tam, where available (in permissible limits) greater bending or kinking hose. Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. - as well as for classic high-pressure hydraulic oil installations. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1; if a factor of 4:1 is required (np. acc. to EN 16643) should multiply values through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% na each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-SWDB-08 is: 250 bar – (170°C-130°C) x 0.75 = 250 bar – 30% = 175 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: double braid of steel AISI 304. pressure working: from 70 bar to 360 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE V (VISIFLON) has layer inner made with high quality serrated PTFE ensuring exceptional flexibility hose and resistance na vibration. has braid with fiber polypropylene characterized by low mass and high chemical resistance. at temperature use above +80°C maximum pressure working should reduced o 5% na each 1°C rise temperatures. for example at temperature 90ºC maximum pressure working for hose AF-VFPB-19 is: 16 bar – (90°C-80°C) x 5 = 16 bar – 50% = 8 bar. exists possibility order version in black braid polymer (version PBB), o similar characteristics jak version PB, for applications tam, where color bright nie can be used. available versions: standard (orange) and antistatic (black). antistatic teflon version AS, contains appropriate distributed in PTFE carbon and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. Material hose: spirally Serrated PTFE (teflon). Reinforcement: braid polypropylene. pressure working: od 12.5 bar up to 30 bar - depending on diameter hose. temperature use: from -30°C to +100°C. resistant na full vacuum for temperatures: +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The PTFE tube of the hose is extruded under strictly defined and controlled conditions, which ensures its highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel AISI 316, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose pod high pressure. Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. - as well as for classic high-pressure hydraulic oil installations. Safety factor 3:1; if a factor of 4:1 is required (np. acc. to EN 16643) should multiply values through 0.75. at temperature use above +130ºC maximum pressure working given in parameters should reduced o 0.75% na each 1ºC above tej temperatures. for example at temperature 170ºC maximum pressure working for hose AF-SWSB-316-06 is: 240 bar – (170ºC-130ºC) x 0.75 = 240 bar – 30% = 168 bar. Material hose: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 316. pressure working: from 80 bar to 240 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for conveying and handling crude oil, petrochemical products and drill cuttings mixed with crude oil (up to 50% aromatic compounds). Layer inner with black, smooth blend rubber NBR/PVC. Reinforcement layers strength cord synthetic. It has copper wires ensuring electrical continuity between the hose ends – provided they are correctly connected to the ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to oil, water sea, abrasion and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on North Sea platforms, successfully used in onshore applications. On special order available also versions o higher pressure working (20 bar, 27 bar), with specified force breaking at tension (2T for 2”, 4T for 3” and 7T for 4”, 5” and 6”) and approval type ABS ( American Bureau of Shipping Type Approval ) for complete line. Inner layer: black NBR rubber/PVC. Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 17 bar. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose delivery intended for conveying and distribution liquid products industry petrochemical, containing up to 50% hydrocarbons aromatic (e.g. diesel - oil drive, oil heating, gasoline up to 50% aromas). suitable for pumps for refuelling. Layer inner with black, smooth rubber synthetic. Reinforcement cord synthetic. has two copper cable ensuring continuity electrical between fitting hose (resistance R < 100 Ω between fitting) – under a condition correct connection cables for ends. Layer outer with rubber synthetic high quality resistant to oil and conditions atmospheric. hose compliant with requirements standards EN 1360:2013 type 1 type M, for hoses for systems distribution fuels. possibility order length for 120 meters. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA very strong delivery hose for aviation fuel, intended for direct pressurised refuelling of aircraft. It can also be used in fuel transfer operations in airport tankers – dispensers, in cases not requiring high vacuum. can be wound on drums. Suitable for aviation fuel for turbine engines (aviation kerosene, kerosene, e.g. Jet A1), aviation petrol and fuels with an aromatic hydrocarbon content up to 50%. Layer inner with black, smooth, rubber NBR. Reinforcement layers high-strength cord synthetic. Layer outer with black, antistatic rubber synthetic, resistant to abrasion, conditions weather and contact with oil. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type C/Ω) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Hoses with fluorescent marking visible at night are available on special order. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: od -25°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystalline transparent, flexible hose free of smell and taste, non-toxic, nie containing phthalates and BPA (bisphenol A). intended for conveying milk and products milk, used in equipment milking. smooth, non-porous surface inner hose eliminates problem settling fat, particles product and growth bacteria. built-in in wall hose blue tape ensures customer o receipt original hose TYGON® S3™ M-34-R, designed specially for transport raw milk. meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, 3-A, Japanese MHLW370(3-D). cleaning through flushing acc. to special procedures. compliant with REACH and California Proposition 65 - nie contains substances hazardous and banned. length full roll hose 30 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTraditional, known and proven od lat, hose with red rubber natural. easy for installation thanks to its softness (hardness 45° Shore – A), flexible and flexibility. resistant na abrasion, o low permeability for gases and sound resistance na acids and bases. used for liquids and gases for many applications industrial and in laboratories. meets requirements FDA for contact with food. Sterilization steam 30 min. (1 bar, 141°C) or oxide ethylene. length full roll hose 25 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber natural (NR). temperature use: from -30°C to +70°C (125°C for moist hot). temperature brittleness: -40°C. Hardness: 45° Shore (A). Density: 1.13 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose, PVC intended for water. It can be used for conveying water potable (short-term contact with water potable) – has issued in the Czech Republic certificate conformity with requirements 409/2005 Sb for this use (contact Tubes International). Do use in industry, agriculture, horticulture and use domestic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 10 bar to 17 bar - depending on the diameter hose. Operating temperature: from -5°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery of reinforcement steel and with layer external resistant na oil, for conducting steam saturated and superheated. Layer inner o sound resistance na high temperature and steam saturated. can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant na oil, temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial, in particular tam, where required is resistance layer outer na oils, greases and other products petrochemical. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. hose VAPOFER EN ISO 6134 is version antistatic (R ≤10 6 Ω), compliant with the standard EN ISO 6134/05 type 2 class B (Ω). Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black rubber synthetic, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with base magnetic and valve for supply coolant - system 1/4". parts components: 20 segments (L=300 mm), nozzle flat 1", valve with a thread external 1/4" BSPT and base magnetic with "tail" for hose 1/4" (size thread fittings 1/8" NPT). Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction supplied in the molds ready line, o various lengths, with mounted fitting, intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. available length: od 10 m for 25 m. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction supplied in the molds ready line, with mounted fitting, a clamp and a cable, intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. short sections hose o length 1 m with fitting used are as hoses cover, rested on edge hole channel, inside which introduced is for channel pressure hose cleaning or line inspection with camera. mounted on the tip clamp with attached a cable o length 7.5 m allows on maintaining appropriate position hose cover. length: 1 m. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar. Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial hose high-pressure for water for cannons snow resistant to abrasion, aging, rotting, radiation UV, conditions atmospheric and ozone. designed for continuous use at high pressure. flexible in low temperature. thanks to coating outer in yellow color perfectly visible on snow, even in dusk. supplied with mounted couplings type CAMLOCK (socket C and plug E) in version high-pressure 60 bar of steel stainless AISI 316. available also other length lines DN52 (e.g. 25, 30 and 40 m). Maximum length hose 60 m. Inner layer: EPDM rubber. Reinforcement: double polyester braid. Outer layer: yellow, special coating resistant to abrasion. Working pressure: 60 bar. Operating temperature: od -40°C up to +80°C (water).
