Strong hose delivery intended for hot oil in installations hydraulic under pressure up to 40 bar. Layer outer made is with blue rubber synthetic, self-extinguishing (in accordance with requirements MSHA), resistant to conditions atmospheric. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: blue self-extinguishing synthetic rubber. Working pressure: 40 bar. Operating temperature: od -30°C up to +130°C (momentarily up to +150°C).

Flexible, soft hose rubber with external a braid of galvanized steel, intended for gasoline and oils petroleum-based such as e.g. oil drive, heating, lubricating. mounted in installations fuel and oil small vehicles and equipment industrial. It can also be used for water, cooling liquids, non-oxidising detergents, air. Based on the requirements of the DIN 73379 standard. Layer inner with smooth, black rubber NBR. The external reinforcing braid of galvanized steel provides high pressure resistance. W braid black band marking. The maximum working temperature depends on the medium: for petrol, unleaded petrol, fuels up to 50% aromatic hydrocarbon content: +40°C; for diesel oil (diesel): +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidising detergents: +80°C. Hose material: black NBR rubber. Reinforcement: external braid wire of galvanized steel. Working pressure: from 10 bar to 20 bar, dependent od diameter hose. Operating temperature: od -35°C up to +80°C (Maximum temperature dependent od medium).

Flexible hose rubber CODAN 3106 intended for gasoline leaded and unleaded. used for connections e.g. carburettor with pump fuels in cars, motorcycles, mopeds, tractors garden, etc. Not is suitable for engines with system injection. Based on the requirements of the DIN 73379 standard type B (03/1982). Layer inner with smooth, black blend rubber NBR / PVC. The external braid vulcanised with rubber reinforces the hose and protects against contact with hot element. It can also be used for water, cooling liquids, non-oxidising detergents, air. The maximum working temperature depends on the medium: for water and cooling liquids based on ethylene glycol: +90°C, for air: +80°C, for liquid, non-oxidising detergents: +80°C, for diesel oil (diesel): +80°C, for petrol, unleaded petrol, fuels up to 50% aromatic hydrocarbon content: +40°C. Hose material: black NBR rubber/PVC. Reinforcement: external textile braid (black polyester). Working pressure: from 5 bar to 13 bar, depending on the diameter hose. Operating temperature: od -30°C up to +100°C (momentarily), Maximum temperature use dependent od medium.

Flexible, very pliable, hose for conveying gasoline and oil drive, fire-resistant, for small vessels - recreational boats up to 24 m long. hose o pressure working 10 bar, manufactured method mandrel. Intended for fuel systems of stationary engines on ships, motorboats, yachts etc.. Suitable for unleaded petrol, petrol with up to 10% ethanol added (E10 petrol), diesel oil and diesel oil with 10% FAME esters added (B10 – biodiesel). Compliant with ISO 7840 type A1 (fireproof, fuel vapour permeability less than or equal to 100 g/m2/24 h), compliant with directive 94/25/EC, RINA certified, compliant with SAE 1527, USCG type A1. Layer inner with black, smooth rubber synthetic, resistant to oils and fuels up to 50% content hydrocarbons aromatic. Reinforcement layers synthetic cord, a for hose POSEIDON LL additional spiral steel. Layer outer with black, self-extinguishing rubber synthetic, resistant oil and conditions atmospheric (resistance to fire: ISO 7840 Annex A: hose filled fuel should withstand flame through 2.5 min). POSEIDON : hose POSEIDON is soft a hose delivery without reinforcement spiral steel. the manufacturer recommended assembly hoses POSEIDON o diameter over 19 mm in installations in sections straight or o gentle (high) radius bends. hose is used in particular in installations filling tanks fuels boats. On special order Available hose POSEIDON o smaller diameters 6, 8.10.13.16 and 19 mm, o pressure working 10 bar. POSEIDON LL : hose POSEIDON LL has additional Reinforcement spiral steel, co ensures resistance to vacuum and kinking. hose is very pliable, its minimal radius bends corresponds only three times diameter internal and can be easily installed in tight spaces compartment engine boats. universal use and high quality hose make, that is on readily and often used through manufacturers greater yachts motor. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord synthetic (POSEIDON); cord synthetic, steel spiral (POSEIDON LL). Outer layer: synthetic rubber. Working pressure: 10 bar. Operating temperature: od -30°C up to +100°C.

Hose rubber reinforced a braid of galvanized steel ensuring high resistance pressure, perfectly works in installations oil small vehicles, installations fuel and equipment industrial. intended for gasoline and oils petroleum-based such as e.g. oil gear, heating czy drive. Layer inner made with rubber NBR in connection with a braid in the molds mesh (braid), make that hose is simultaneously soft and flexible. The maximum working temperature depends on the medium: for petrol, unleaded petrol, fuels up to 50% aromatic hydrocarbon content: +40°C; for diesel oil (diesel): +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidising detergents: +80°C. Inner layer: smooth, black NBR rubber. Reinforcement: external braid wire of galvanized steel. Working pressure: from 20 bar to 25 bar - depending on the diameter hose. Operating temperature: od -35°C up to +90°C (Maximum temperature use dependent od medium).