Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting mining STECKO intended for crimping onto hoses hydraulic type 2SN, dostarczana in komplecie with a ferrule. Material: free-cutting steel, galvanized. sealing: NBR (O-ring), teflon (ring oporowy).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP end fitting with socket for 3090 type air conditioning hose. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF male thread, 74° cone sealing (AGJ). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with male thread tapered NPT, sealing na gwincie (AGN), possible 60° cone sealing. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP male thread, flat sealing - requires the use of an additional flat gasket (AGR-F). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSPT male thread, sealing na gwincie using band teflonowej or uszczelniacza in flows; possible 60° cone sealing (AGR-K). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting hydraulic screw-together, type S, for a bolt with metric thread (RNM). intended for screwing onto hoses rubber and termoplastycznych using a ferrule screw-together. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), for a bolt with metric thread (RNM). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end (type P - with a special "tail" for thermoplastic hose) with external metric thread, sealing on a 24° cone (CEL), lightweight series. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric male thread, 60° cone sealing (CEL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with external metric thread, sealing on a 24° cone (CES), heavy series. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric male thread, 60° cone sealing (CES), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type (use ferrules additionally marked with the letters "-PH" at the end of the index). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric male thread, 60° cone sealing (CES), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF female thread with a nut, 74° cone sealing (DKJ), angled 45°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF female thread with a nut, 74° cone sealing (DKJ), angled 90°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type (use ferrules additionally marked with the letters "-PH" at the end of the index). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with internal UNF thread, sealing on a 74° cone (DKJ). Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF female thread, 74° cone sealing (DKJ). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type (use ferrules additionally marked with the letters "-PH" at the end of the index). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing face (DKL-FL), angled 90°, series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing metal - metal, cone uniwersalny 24°/60° (DKL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOS), angled 45°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOS), angled 90°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type (use ferrules additionally marked with the letters "-PH" at the end of the index). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOS), angled 90°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOS), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type (use ferrules additionally marked with the letters "-PH" at the end of the index). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP female thread with a nut, 60° sealing cone (DKR), angled 45°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type (use ferrules additionally marked with the letters "-PH" at the end of the index). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP female thread with a nut, flat sealing - requires the use of an additional flat gasket (DKR-F), angled 45°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP female thread with a nut, flat sealing - requires the use of an additional flat gasket (DKR-F), angled 90°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP female thread with a nut, flat sealing - requires the use of an additional flat gasket (DKR-F). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing metal - metal, cone uniwersalny 24°/60° (DKS), angled 45°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with external BSPT thread, sealing on the thread using Teflon tape or liquid sealant. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with male thread tapered NPT, swivel, sealing na gwincie (AGN), possible 60° cone sealing. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF female thread with a nut, flat sealing (ORFS), angled 45°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting hydraulic screw-together, type S, with BSP female thread with a nut, 60° sealing cone (DKR), angled 45°. intended for screwing onto hoses rubber and termoplastycznych using a ferrule screw-together. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting hydraulic screw-together, type S, with UNF female thread, 74° cone sealing (DKJ). intended for screwing onto hoses rubber and termoplastycznych using a ferrule screw-together. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting hydraulic screw-together, type S, with BSPT male thread, 60° sealing cone / na gwincie (AGR-K). intended for screwing onto hoses rubber and termoplastycznych using a ferrule screw-together. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with internal NPT thread, fixed, sealing on the thread using Teflon tape or liquid sealant. Designed for crimping in UHP thermoplastic hoses using a crimp sleeve suitable for the type of hose. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle fitting with a sleeve for thermoplastic hose FR 5 DN2 (1/12"), with internal UNF thread, SAE type, 45° cone. Fitting material: brass. Sleeve material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle fitting with a thermoplastic hose sleeve FR 5 DN4 (5/32"), with internal UNF thread, SAE type, 45° cone. Fitting material: carbon steel, galvanized. Sleeve material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 45° INTERLOCK SAE 3000, O-ring or other gasket in the flange groove, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 45° NON SKIVE SAE 6000 (SFS 45), series heavy, intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
