Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling with shut-off valve and external metric thread. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: up to 350 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adaptor type A115A with internal BSP thread (seal on the thread) and with internal BSP thread (seal on the thread). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° socket DN 9 quick coupling with "tail" for PUSH-ON hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange end (SFL), 90° angle, light series. Designed for clamping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with internal BSP or NPT thread (3/16" ÷ 1"), with valve, ideally suited for gas media. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 240 bar (depending on the size of the quick coupling), (safety factor 4:1). Material: AISI 303 steel. Sealing: NBR (from -40°C to +121°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A121 with external BSP thread (60° cone sealing) and SAE 6000 flange (O-ring sealing or other gasket in the flange groove). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 90°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard quick coupling plug DIN with internal BSP thread. Mainly used in agricultural machinery. Different dimensions from both ISO-A and ISO-B. Standard: manufacturer standard. Applications: hydraulic power (hydraulic oil). Working pressure: up to 400 bar (depending on coupling size). Material: galvanized steel. Sealing: NBR (from -25°C to +100°C). Flow rate provided at Δp = 3 bar [l/min].
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 90 quick coupling plug with a 14 mm diameter tube without a valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter with external BSPT thread (seal on the thread) and internal BSP thread (60° cone seal), with a swivel nut. Used in hydraulic systems for connecting hydraulic flexible hoses and pipes with other installation components (pumps, valves, quick couplings, etc.). Allows for reduction of type and size, compatible with the connections of the joined components. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° socket DN 9 quick coupling with external BSP and metric thread (seal on 60° cone), with or without valve. Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 9 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z – with a regular hydraulic "tail" for hose), BANJO for screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A204 with internal BSP thread, with a rotating nut (60° cone seal) and external NPT thread (thread seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with external BSP thread, 60° sealing cone (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 6 quick coupling plug with external thread and shut-off valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSNAP-TITE quick coupling plug with internal BSP thread, American-made, without valve. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Working pressure: up to 759 bar (depending on the size of the quick coupling), safety factor 2:1. Material: carbon steel, galvanized. Sealing: NBR. Operating temperature: from -35°C to +120°C. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure JIS type A505 adaptor with external metric thread (sealing inverted cone 60°) - KOMATSU and with external BSP thread (sealing ISO-6149 type G - O-ring with retaining ring). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with external BSPT thread, sealing on the thread using Teflon tape or liquid sealant; possible sealing on a 60° cone (AGR-K). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 40 quick coupling plug with external BSP thread and valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SNAP-TITE quick coupling plug with internal BSP thread, manufactured in the USA, features a unique valve design that allows for laminar flows. Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 345 bar (depending on the size of the quick coupling), safety factor 2:1. Material: AISI 316 steel. Sealing: NBR (operating temperature: from -35°C to +120°C), EPR (operating temperature: from -56°C to +120°C), viton (operating temperature: from -26°C to +204°C). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure plug JIS type A506 with external metric thread (sealing inverted cone 60°) - KOMATSU. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling socket DYROS series 40 with external thread and shut-off valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with shut-off valve and external metric thread. "Push-pull" version - automatic disconnection upon accidental tensioning of the hose. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: 250 bar. Safety factor 4:1. Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z – with a regular hydraulic "tail" for hose), with internal UNF thread and nut, flat sealing (ORFS), 90° angle. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DYROS series 40 with hose end and shut-off valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHANSEN quick coupling socket type HK with internal NPT or BSP thread. Compliant with ISO 7241-1 B standard. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Material: AISI 303 steel, AISI 316. Sealing: NBR (operating temperature from -40°C to +121°C), EPDM (operating temperature from -54°C to 149°C), EPDM236 (for use with steam at temperatures above +149°C), viton (operating temperature from -29°C to +204°C). Working pressure: up to 344 bar (depending on the size of the quick coupling). Flow is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with shut-off valve Gromelle type MLDB with internal "flat-face" thread made of high-purity steel (VIM-VAR melting). Used, among others, in industrial installations where ideal cleanliness is required (nuclear, food, pharmaceutical industries, semiconductor production, perfumes). Not intended for connecting - disconnecting under pressure. Working pressure: 25 bar (safety factor 4:1). Operating temperature: from -20°C to +200°C (viton), from -40°C to +150°C (EPDM). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DYROS series 30 with hose end without valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), heavy-duty series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHANSEN type HK quick coupling with internal BSP or NPT thread. Compliant with ISO 7241-1 B standard. Quick couplings designed and manufactured in accordance with the PED 2014/68/EU directive. Quick couplings in sizes from 1/2” to 1” are made of special hardened steel, providing increased resistance to pressure pulsations. In the case of pulsating pressure with the coupling disconnected, the maximum working pressure should be reduced by 50%. Can be used interchangeably with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Material: galvanized steel. Sealing: NBR (operating temperature from -40°C to +121°C), EPDM (operating temperature from -54°C to +149°C), viton (operating temperature from -29°C to +204°C). Working pressure: up to 345 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 80 quick coupling socket with hose end and shut-off valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket without valve quick coupling TEMA STANDARD (NORDIC RANGE) with internal BSP thread. The socket has an additional o-ring (besides size 3/16"), making it suitable for gas installations. It also features a safety ring to prevent accidental disconnection. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew quick coupling with zero leakage - socket, type RH, with external metric thread DIN 2353. The flat design of the front surface prevents fluid loss during disconnection. Coupling is allowed under residual pressure of 50 bar. Application: hydraulic power (hydraulic oil). Material: carbon steel with zinc-nickel coating. Socket sealing: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 420 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 90 quick coupling plug with hose end without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° DN 9 quick coupling socket with hose end, with valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 15 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hoses), with external metric thread, sealing on a 60° cone (CEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGROMELLE series H-5000 quick coupling plug with internal BSP and metric thread. Designed for applications with high working pressure, pressure impulses, mechanical loads, and frequent connecting and disconnecting. Designed and manufactured in accordance with the PED directive 2014/68/EU. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). In the case of pulsating pressure at the disconnected coupling, the maximum working pressure should be reduced by 50%. Material: galvanized steel. Sealing: NBR (operating temperature from -20°C to +100°C), above size 1" viton (from -20°C to +200°C). Working pressure: up to 1000 bar (depending on the size of the quick coupling), safety factor 3:1. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with external BSPT, NPT, and metric thread, without valve, used in the industry for cooling injection molds and casting parts made of plastics and aluminum, for the transfer of hot oil. Plug geometry: straight, 90°, 45°. Flow diameter: 8.3 mm (series 100.08) or 13 mm (series 100.12). Working pressure: 10 bar. Operating temperature: from -20°C to +200°C. Material: nickel-plated brass.
