Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hoses), with external BSP thread, 60° sealing cone (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki series PCV PIPE CUPLA quick-connect fittings with external BSPT thread, designed for connecting copper tubes with other installation components. The connection is made by inserting the tube into the fitting and tightening the clamp; the double sealing ensures a leak-proof connection. Used for gas media (air, nitrogen, refrigerants - freon R12, R22, R134a along with compressor oil). Depending on the medium, the type of sealing must be selected. Applications include testing the tightness of tanks, draining and filling systems in air conditioners, refrigerators, etc. Material: brass. Working pressure: 45 bar (vacuum up to 0.13 Pa). Operating temperature: from -20°C to +80°C (chloroprene), from -20°C to +180°C (viton), from -20°C to +120°C (HNBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with internal BSP or NPT thread (3/16" ÷ 1"), with valve, ideally suited for gas media. Can also be successfully used in hydraulic systems for hydraulic oil, as well as in industry for water, steam, fuels, oils, or chemicals. Interchangeable with ISO-B quick couplings from other manufacturers. Working pressure: up to 345 bar (depending on the size of the quick coupling), (safety factor 4:1). Material: carbon steel, galvanized. Sealing: NBR. Operating temperature: from -40°C to +121°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard quick coupling socket DIN with internal BSP thread. Mainly used in agricultural machinery. Different dimensions from both ISO-A and ISO-B. Standard: manufacturer standard. Applications: hydraulic power (hydraulic oil). Working pressure: up to 400 bar (depending on coupling size). Material: galvanized steel. Sealing: NBR (from -25°C to +100°C). Flow rate provided at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 6 quick coupling socket with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), 45° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with shut-off valve and external metric thread. "Push-pull" version - automatic disconnection upon accidental tensioning of the hose. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: 250 bar. Safety factor 4:1. Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki series SP CUPLA type A socket with a shut-off valve and internal BSPT thread, featuring excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Material: AISI 304 steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR), from -20°C to +180°C (Viton).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBX7 clamping sleeve for thermoplastic hoses type R6, R7, or R8. Installation - no machining. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEATON quick coupling plug series J70000 with hose end without valve. Designed for cooling and thermostating injection molds, for water and oil. Material: nickel-plated brass. Sealing: viton. Working pressure: 15 bar. Operating temperature: -15°C to +200°C (when using identifying rings for sockets, operating temperature up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 40 quick coupling plug with external thread without valve. Available with BSPT or BSP metric thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), angled 45°, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 6 quick coupling plug with a 10 mm diameter tube without a valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProtective cap for DIN quick-connect plug, prevents dirt from entering the connector and system, which could result in damage to hydraulic system components. Material: PVC. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 6 quick coupling plug with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A quick coupling socket cap protecting the couplings from contamination, which may result in damage to components and the ingress of impurities into the system. Available in colors: red, yellow, green, blue, or black. Material: PE or PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 6 quick coupling socket with internal thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: all components are made of brass, while retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with internal BSP or NPT thread (3/16" ÷ 1"), with valve. Ideally suited for gas media, as it features two O-rings and a backup ring, can also be successfully used in hydraulic systems for hydraulic oil, as well as in industry for water, steam, fuels, oils, or chemicals. Interchangeable with ISO-B quick couplings from other manufacturers. Working pressure: up to 345 bar (depending on the size of the coupling), (safety factor 4:1). Material: carbon steel, galvanized. Sealing: NBR. Operating temperature: from -40°C to +121°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN NON DRIP quick coupling socket (leak-free) with valve, designed for fluid transfer (water, oil, chemicals, etc.). Flat contact surfaces minimize potential fluid leakage and prevent air inclusion while allowing for easy maintenance of the coupling's cleanliness. Sockets and plugs are available in versions with or without a shut-off valve, allowing for three coupling configurations: free flow, one-sided shut-off (socket must have a valve), and two-sided shut-off (leak-free). Protective caps are available to shield the coupling from contaminants when disconnected. To ensure additional safety, when interchangeability between socket and plug is not permissible, the coupling can be color-coded: green (standard) and optionally black, blue, red, white, and yellow, or key coding, where the socket and plug have additional grooves and protrusions, allowing only properly matched coupling connections. Material: nickel-plated brass. Sealing: NBR, Viton, EPDM. Working pressure: 20 bar. Operating temperature: from -15°C to +205°C, depending on the type of sealing.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with external BSPT thread, sealing on the thread using Teflon tape or liquid sealant; possible sealing on a 60° cone (AGR-K). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 6 quick coupling plug with external BSP and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (Viton). Material: brass (plug body, valve), stainless steel (spring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for ISO-F quick-connect socket, protecting connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: PVC. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling coupling DYROS series 80 with hose end and shut-off valve. Designed for cooling liquids in plastic processing, compressed air systems, gas cylinders, and other technical fields. Material: all components are made of brass, while the supporting rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN NON DRIP quick coupling plug (leak-free) with valve, designed for fluid transfer (water, oil, chemicals, etc.). Flat contact surfaces minimize potential fluid leakage and prevent air inclusion while allowing easy maintenance of the coupling's cleanliness. Sockets and plugs are available with or without shut-off valves, allowing for three coupling configurations: free flow, one-sided shut-off (socket must have a valve), and two-sided shut-off (leak-free). Protective caps are available to shield the coupling from contaminants when disconnected. To ensure additional safety, when interchangeability between socket and plug is not permissible, the coupling can be color-coded: green (standard) and optionally black, blue, red, white, and yellow, or key coding, where the socket and plug have additional grooves and protrusions, allowing only properly matched coupling connections. Material: nickel-plated brass. Sealing: NBR, Viton, EPDM. Working pressure: 20 bar. Operating temperature: from -15°C to +205°C, depending on the type of sealing.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for ISO-F non-leak quick coupling socket protecting connections from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKL), 90° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling plug with hose end, without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 25 bar. Material: brass (plug body).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling socket DYROS series 90 with hose end without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with internal BSP or NPT thread (3/16" ÷ 1"), with valve, for gas media. It has two O-rings and a retaining ring. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 200 bar (depending on the size of the quick coupling), Safety factor: 4:1. Material: brass. Sealing: NBR (from -40°C to +121°C), Viton (from -29°C to +204°C), EPDM (from -54°C to +149°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 90°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal metric thread and nut, metal-metal sealing on a 60° cone (DKM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket type TC designed for use in hydraulic systems of heavy-duty trucks - dump trucks. The socket is equipped with a locking nut, allowing for installation in a partition version. Tightening of the quick coupling under residual pressure is permitted up to a maximum of 50 bar (static pressure remaining in the system after the drive is turned off). Application: hydraulic power (hydraulic oil). Material: galvanized steel. Sealing: NBR. Operating temperature: from -40°C to +106°C. Working pressure: up to 350 bar (depending on size). Safety factor 3:1. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for the body socket of DYROS quick couplings. Available with metric or BSPT thread. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with O-ring on a 24° cone (DKOS), heavy-duty series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 90 quick coupling plug, 100 mm in length, with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for CEJN quick coupling series 525 and 526 (NORDIC RANGE) protecting connections from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC. Color: black.
