Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for hot water mixed with antifreeze fluids. Used in cooling and heating systems, for pumps in engines and machines. Inner layer resistant to heat and cooling fluids. Outer layer resistant to heat and aging. Manufactured according to standard DIN 73411:79. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: synthetic cord. Outer layer: black EPDM rubber. Working pressure: from 2 bar to 4 bar - depending on the hose diameter. Operating temperature: from -40°C to +120°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for mining applications. Antistatic, non-toxic, flame-resistant outer layer. It has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black synthetic rubber. Reinforcement: four layers of spiral steel wire. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 445 bar depending on the hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTranslucent, yellow, flexible hose designed specifically for fuel and lubricating oils. Resistant to swelling and hardening due to hydrocarbon exposure, significantly reduces the risk of cracking and leakage. Minimal extractability ensures fuel cleanliness, and low permeability to aromatic substances protects the operator and the environment. Ozone and UV radiation resistant. The flexibility of the hose facilitates installation even in tight spaces. The translucent wall allows for flow monitoring. The hose is resistant to most petroleum products and fuels (including those with up to 10% ethanol) and can be used for gasoline, kerosene, diesel, heating oil, lubricants, cutting fluids, and glycol-based fluids. Widely used and proven in thousands of applications: small engines, automotive, recreational vehicles, lawn mowers, saws, cooling and lubrication systems, cutting and polishing equipment. Full hose roll length: 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -37°C. Hardness: 57° Shore (A). Density: 1.26 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with excellent temperature resistance and strength under elevated pressure made from a special, non-flammable polymer. It has a calibrated outer diameter. The material is resistant to aging and UV radiation, exhibiting good sliding properties which counteract material wear. The material is impermeable to gases, resistant to most concentrated bases and inorganic, organic acids, alcohols, and solvents at elevated temperatures. It has electro-insulating properties. The calibrated outer diameter allows for connection with plugs or fittings from leading manufacturers. Dimensional accuracy ensures consistent compressive strength even for hoses with larger diameters, making it suitable for a wider range of practical applications. Hose material: polyvinylidene fluoride PVDF. Working pressure: from 16 bar to 80 bar (depending on hose diameter). Operating temperature: from -50°C to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyurethane spiral hose designed for pneumatic control systems, hand tools, industrial robots, etc. Resistant to abrasion, rupture, and kinking, successfully used in the automotive industry as well. Its high flexibility is maintained even after many years of use. Finished on both ends with straight sections of 100 mm and 500 mm and external BSPT threaded ends (without springs for an outer diameter of 16 mm). The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 17 bar (depending on hose diameter). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible suction and discharge hose designed for the transfer of chemical substances. Made from thermoplastic vulcanizate TPV – a material that combines the processing advantages of thermoplastic polymers (PP – polypropylene) with the properties of vulcanized rubber (EPDM). Good chemical resistance - similar to EPDM rubber allows for use with many substances, including acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols, and ketones, concentrated detergents. Not recommended for fuels, oils, aromatic solvents. Resistant to weather conditions, aging, and abrasion (abrasion resistance according to ISO 4649:150 mm³). Low weight and small bending radius of the hose ensure ease of handling, which can be an advantage when transferring from tankers and containers. A special version, VACUPRESS SUPER CHEMI (diameters up to 63 mm), is available on special order with an inner layer lined with polyethylene (LLDPE), which increases the chemical resistance of the hose and allows its use with concentrated hydrochloric and sulfuric acids, nitric acid, as well as aggressive herbicides and insecticides. Inner layer: thermoplastic rubber TPV. Reinforcement: polyester braid, galvanized steel spiral. Outer layer: thermoplastic rubber TPV. Working pressure for temperature +20°C: from 7 to 15 bar - depending on the diameter of the hose. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE FX hose is an optimal solution for industrial applications where high flow rates, chemical and temperature resistance, and permeation resistance are required. It is perfectly suited for the transfer of chemicals, fuels, oils, paints, solvents, adhesives, dyes, gases, and steam, detergents, water, and food substances. At operating temperatures above +130°C, the maximum working pressure specified in the table should be reduced by 1% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for the hose AF-FXAM-10 is: 70 bar – (170°C-160°C) x 1 = 70 bar – 40% = 42 bar. In cases where a substance that is a poor conductor and has potential electrification properties flows through the PTFE hose, the electric charge will accumulate on the inner surface of the PTFE, and to avoid static electricity issues, an antistatic AS variant of PTFE is used. Antistatic Teflon in the AS version contains appropriately distributed graphite in the PTFE and has a resistance R <108 Ω (according to ISO 8031 annex A). Hose material: smooth inside, corrugated outside PTFE (Teflon) - natural white and antistatic - black. Reinforcement: aramid braid. Working pressure: from 35 bar to 77 bar - depending on the hose diameter. Operating temperature: from -70°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible pressure hose with steel reinforcement for conveying saturated steam. The inner layer has good resistance to high temperatures, saturated steam, and the phenomenon of pop-corning (destruction of the inner layer due to the ingress of steam condensate). It can temporarily withstand superheated steam at a temperature of 230°C and a pressure of 18 bar; prolonged use with superheated steam reduces the hose's lifespan. The outer layer is resistant to temperature, weather conditions, abrasion, and aging. The hose is used in the chemical, petrochemical, and energy industries, as well as in other industrial applications. It is not intended for steam cleaners ("dry steam cleaners"). For steam, use special screw-on fittings designed for steam. To extend the lifespan, the hose should be emptied of steam after use to avoid condensate accumulation. Safety factor: 10:1. Standard length: 60 m. Inner layer: black IIR rubber. Reinforcement: double steel wire braid. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for high-pressure grease lubrication systems. Standard: DIN 1283. Inner layer: polyester. Reinforcement: single synthetic braid. Outer layer: polyurethane (130A), micro-perforated polyurethane (130C). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal flexible high-quality polyurethane hose with a braid produced in the United Kingdom. Designed for water, air, oils, fuels, lubricants, chemicals, and granules. Stronger than similar PVC hoses, maintaining its shape, resistant to kinking, hydrolysis, and abrasion, flexible at low temperatures. Contains no cadmium, silicone, plasticizers, or halogen compounds. Inner layer: transparent polyurethane-polyether. Reinforcement: polyester braid. Outer layer: transparent polyurethane-polyether. Working pressure at 20°C: from 10 bar to 20 bar - depending on the hose diameter. Operating temperature: from -30°C to +70°C (temporarily +100°C). As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug NiTO made of AISI 316L stainless steel with external BSP thread. Available in two systems: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., a 1/2″ socket with a 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with external BSPT thread and shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector plug FERRARI with flange PN10, type F.46, for use in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with external BSP thread, widely used for example: for the transfer and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / Details2" valve in "premium" version for pallet container made entirely of durable polypropylene, eliminating any occurrence of corrosion. Standardly equipped with a polyethylene (LDPE) seal, which has a very high resistance to chemical substances compared to standard rubber seals such as EPDM, NBR, or Viton. The valve is additionally equipped with a locking latch and a cap. Available outlet connection of the valve: external thread (trapezoidal, NPT) or CAMLOCK A fitting. Material: polypropylene. Seal: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality two-way ball valve type BKH L/S with external metric thread, DIN 2353, designed for high-pressure hydraulic installations. Available as: L (light series), S (heavy series). Material: steel (body, ball, stem). Seals: PA (ball), NBR (stem). Operating temperature: from -40°C to +100°C (PA); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel needle shut-off valve with manometer connection, used in hydraulic systems as an isolating element for the manometer from the installation, protecting against overload and pressure spikes during opening and allowing for replacement. Simple version (FT290) and 90° angled version (FT291). Panel mounting possible on the thread under the knob. Available in AISI 316 stainless steel upon special request. Material: galvanized carbon steel (body), carbon steel (needle), polyamide 66 (knob). Sealing: NBR/PTFE. Working pressure: 350 bar. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version finished with plug-in couplings on both sides (pipe - pipe). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFPRI type check valve used in hydraulic systems as a component for closing the flow of hydraulic fluid in one direction and allowing free flow of fluid in the opposite direction. Designed to be screwed into a suitably deep threaded hole. Supplied with an O-ring, which serves as a seal between the valve and the threaded hole. The O-ring can be installed on either side of the valve (depending on the flow direction desired). Standard opening pressure: 0.5 bar. Permissible flow direction A → A1. Material: galvanized steel (body), hardened steel (stem). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd plate set for the SKILLAIR system, series 100, 200, 300 or 400.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction socket connector of the STECKO system for use in hydraulic systems for mining. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsB4 type bulkhead fitting with a cutting ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled socket coupling type C6 designed for connecting hoses made of soft plastics. The connection is made by fitting the hose onto the end and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting, series F type R 4 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel-coated through a special chemical process, and seals made of Viton provide high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality straight connector, made entirely of AISI 316L steel, series 60040. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor enabling the connection of a pressure gauge with a 1/8" thread to a 1/4" coupling, o-ring. Material: carbon steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsASTA version of the PROTECTOR cover is fully antistatic, designed for underground work and other special environments that require a conductive surface. Compliant with standard EN ISO 80079-36:2016, which is related to the ATEX directive for non-electrical equipment in explosive atmospheres. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for lance. Material: stainless steel. Connection: GZ 1/4" NPT. Working pressure: up to 350 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick coupling socket with external thread and valve designed for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Optionally, the socket can be equipped with a safety ring to prevent accidental disconnection. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (connected coupling). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1/2" with hose end and shut-off valve. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils). For valve O-ring with EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK CRS connector socket with smooth hose end (for shell clamp) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrari lever connector socket with external BSP thread, type F.14, for use in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector socket with a wide range of applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of gasket material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever coupling socket with PN 10 flange, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: carbon steel, galvanized. Sealing: SBR. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe R-4000 type check valve is designed and manufactured in accordance with the PED Directive 2014/68/EU. It is intended for high-pressure hydraulic and industrial installations. It closes the flow of medium in one direction and opens free flow of medium in the opposite direction. Standard opening pressure: 0.5 bar (also available in 1, 2, 3, and 5 bar). Permissible flow direction: A → A1. Material: galvanized steel, nickel-plated brass, stainless steel AISI 316L. Sealing: NBR - standard RA, RL; viton (FKM) - standard RZ; EPDM - option. Operating temperature: from -20°C to +100°C (NBR); from -20°C to +200°C (viton); from -40°C to +150°C (EPDM).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal NPT thread, type 100H, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO socket elbow for use in hydraulic systems for mining. Material: automatic steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFixed flange PN16 type CNWF made of AISI 304 steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps or clamp bands. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° Non-Skive Flare Fitting SAE 6000 (SFS 90), heavy series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
