Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpherical end - insert under the nut. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with internal BSP thread, 60° cone with o-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting strip for pneumatic hoses. Facilitates and accelerates the construction of installations, reduces installation space, increases resistance to vibrations. Color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini double-acting cylinder ISO 6432 STD, type 113, has been designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance. The cylinder is made with a stainless steel sleeve. The dimensions of the external covers for certain diameters have been reduced, allowing for the installation of cylinders in confined and restricted spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but merely as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 16, 20, and 25 mm. Stroke length: from 10 to 500 mm. Operating pressure: from 0.6 to 10 bar. Sealing: polyurethane, NBR. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for a double-conical ring intended for the installation of a conduit for lubrication systems using standard tube fittings and seamless pipes made of steel or brass. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal cylindrical threaded nipple type A1, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial version of the PYROJACKET shield designed primarily for aviation (manufactured according to SAE Aerospace Standard 1072E), railway industry (compliant with DIN EN 45545-2:2013-08), and marine applications. Additionally, it is certified in diameters from 13 mm to 127 mm by DNV for temperatures up to +800°C for 30 minutes (ISO 15540) and by MSHA (for use in mines). A VCO version with flame-retardant Velcro is available upon request, in diameters ranging from 22 mm to 140 mm, with lengths up to 30 meters. The Velcro mounting allows the shield to be easily installed without disconnecting wires, hoses, or pipes. Material: fiberglass coated with silicone in a rusty color. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes), (up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking ring for metric threaded nut type AI 13740 made of brass. Range of external diameters of connected pipes from 4 to 22 mm. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHot water gun AKBO. Made of stainless steel, insulated trigger, EPDM rubber covers, Viton seals. Use with hot water requires special caution. Connection: 1/2" BSP. Working pressure: 24 bar. Flow rate: 75 l/min. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight plastic compressed air gun designed for removing various contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Made of durable glass fiber reinforced polyamide. Ergonomic shape and lever action that does not require force ensure user comfort. Due to its low weight and plastic construction, it is particularly recommended for the automotive, textile, electronic industries, etc. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, interchangeable, with an external connection thread M12x1.25. Instead of the standard nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, we distinguish a gun finished with a EUROSTANDARD 7.2 plug, a hose end with a diameter of 6 mm, 9 mm, and 13 mm, or an internal thread of 1/4". Material: body - blue polyamide (PA6 GK30) reinforced with glass fiber; sealing - NBR, PU. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMB cover, without chain, for TW loading connections. Used for VK (male) parts, serves as a pressure-resistant cap. Material: aluminum. Operating temperature: from -20°C to +65°C (consider medium and sealing material). Seal type TWF, seal material: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe P20 NMS crimping press is a basic stationary device for workshops, service centers, and small plants producing hydraulic hoses with an internal diameter of up to 1.1/2”, intended for small-scale hose production. It is powered by a three-phase electric motor (400 V) with a power of 3 kW. The control of the achieved crimp diameter is done using an optical indicator (LED light), and once the diameter is reached, the press jaws stop. The crimp diameter setting is adjustable with a micrometric knob with a setting accuracy of 0.01 mm. All FINN-POWER crimping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a crimp diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 should be ordered. The P20X machine can be additionally equipped with a base or a bracket with sockets for storing jaws, complete with a magnetic holder for their quick exchange.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° flange connection with a compact design, featuring a flange with a pitch diameter of holes from 35 mm to 55 mm, with an external metric connection thread, socket 24° DIN 2353. Used in hydraulic pump connections. Standardly equipped with a set of screws, washers, and an O-ring. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal and external threaded nipple for pressure gauges with standard pressure connection according to EN 837-1. Allows the installation of a pressure gauge to a larger size socket. The pressure gauge is mounted to the internal thread d1. This connection is self-sealing – the cone at the bottom of the hole d1 presses into the hole of the centering plug of the pressure gauge connection. Threads d1 and d2 are secured against loosening of the connection by a special adhesive. Designed for non-aggressive liquids and gases, for the installation of pressure gauges, taps, and pressure valves, as well as other accessories equipped with this type of connection. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHS type BANJO screw with metric or BSP thread, similar to DIN 7643. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble BANJO screw with washer and internal thread type D10 for couplings type R13, R14, D12, D17, D5, D6. Material: nickel-plated brass. Working pressure: 18 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP threaded fitting for use in pipe connections of industrial installations. Fitting seal: cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSC silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 35 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: up to 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary elbow, screw-in with external cylindrical thread, series F type R 32 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, coated with nickel in a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel tee type 62400 with internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, reinforced flexible hose made of platinum-cured silicone rubber. Designed for higher pressures. Used in the pharmaceutical, cosmetic, food, biotechnology industries, sterile filling lines, water treatment systems, vaccine production, bioreactors. Characterized by an exceptionally smooth internal surface that prevents the deposition and adhesion of contaminants inside the hose and the development of bacteria. This facilitates complete cleaning and sterilization of the hose. The smooth internal layer also reduces flow resistance through the hose. Low extractability, non-toxicity, non-hemolytic, and non-pyrogenicity ensure total fluid purity in sensitive applications. Minimal biological load (bioburden). Meets hygienic requirements of the American FDA 21 CFR 177.2600, 3-A, and USP Class VI. Sterilization possible by steam (30 min, 1 bar, 121°C), CIP and SIP cleaning of installations, ethylene oxide, or radiation (up to 5 Mrad). Full hose roll length 15 m (from internal diameter 31.8 mm – 7.5 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: silicone (platinum). Maximum operating temperature: up to +160°C. Brittleness temperature: -80°C. Hardness: 70° Shore (A). Density: 1.18 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality worm clamp for general use designed for quick and easy fastening of industrial hoses, entirely made of AISI 316 stainless steel, recommended for applications in the food, chemical, marine industries, etc. Manufactured in accordance with the requirements of DIN 3017 standard and RoHS directive 2002/95/EC. The ASFA-L clamp with a band width of 9 mm is recommended for standard applications. The unique worm mechanism in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple clamping of the clamp without damaging the hose surface. Material: AISI 316 stainless steel (W5).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for railway nut compatible only with KGW type end nuts. Material: NBR. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, thick hose designed for the removal of sawdust, chips, shavings, bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial fields. Compliant with DIN 26057 Type 3. Antistatic and flame-retardant, ensuring high work safety. Thick wall and dense reinforcing spiral provide high pressure parameters. Very smooth inside, low compressibility. Flexible even at low temperatures. Excellent abrasion resistance, also resistant to microbes and hydrolysis. Free of halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal flow direction of the medium is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ωm, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – according to DIN 4102 class B1. Wall thickness measured between the spiral: 1.4 mm. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose used in systems where frequent contact with water occurs (high resistance to microorganisms and hydrolysis), detergents, and solvents. Maintains high flexibility at low temperatures, resistant to abrasion and kinking. Calibrated outer diameter allows compatibility with plug couplings. Shore hardness (A): 98°. Complies with FDA requirements. Available in natural, black, blue, green, and red colors. Hose material: polyether-polyurethane. Working pressure: from 16 bar to 24 bar, depending on hose diameter. Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible spiral hose over a wide temperature range, resistant to abrasion, welding sparks, and hot metal chips. Designed for pneumatic control systems, hand tools, industrial robots, etc. Resistant to UV radiation and aging. Finished on both ends with straight sections of 100 mm and 500 mm and external BSPT threaded ends. Shore hardness (A) 98°. The stated total length is the maximum length of the hose when stretched. Hose material: flame-retardant polyurethane PUR. Working pressure: up to 13 bar (depending on hose diameter). Operating temperature: from -40°C to +70°C. Standards: UL 94 VO (outer layer). Color black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, smooth oxygen hose, compliant with EN ISO 3821 standard. For use with industrial equipment for oxy-fuel welding, typically alongside a red acetylene hose. Can also be used for natural gas and air. Inner layer: black SBR/EPDM rubber. Reinforcement: PVA. Outer layer: blue EPDM rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose with an inner layer made of chemically resistant polyethylene with ultra-high molecular weight (UPE, UHMWPE). The inner layer is resistant to most acids and bases as well as many other aggressive chemicals (at elevated but not very high temperatures), making the hose widely used in the chemical and petrochemical industries. The UPE inner layer also complies with food-grade hose requirements, is free from phthalates and polycyclic aromatic hydrocarbons (PAH), and features a low friction coefficient during flow, preventing medium deposition on the walls. This significantly facilitates cleaning and allows for use in the cosmetic, pharmaceutical, and food industries as well. Reinforced with synthetic cord and steel spiral, with built-in copper wires for electrostatic discharge. The outer layer is made of chemically resistant EPDM rubber, resistant to abrasion, ozone, and weather conditions. Compliant with EN 12115:11 requirements (type M, resistance between hose ends R ≤ 100 Ω, guaranteed for hoses up to 40 m in length). Standards and requirements: Chemical hoses: EN 12115:2011. Food industry, contact with food (inner layer): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50°C. Inner layer: white creamy UPE polyethylene. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose with an inner layer made of abrasion and oil-resistant polyurethane, reinforced with a densely arranged steel spiral to increase working pressure and resistance to vacuum. Designed for air, liquids, light chemicals, in pneumatic and hydraulic systems, as well as for the transport of solid substances. The smooth inner surface reduces flow losses and ensures ease of cleaning. The transparent wall allows for visual flow monitoring. Reinforcement with a dense steel wire spiral provides very good resistance to vacuum and hose collapse, as well as a small bending radius. In general industrial applications, it can be used for water, light chemicals, and other fluids based on fats, oils, and hydrocarbons (chemical resistance of polyurethane should be considered) and for air, for vacuum transport of dust, powders, granules, and other abrasive bulk materials (abrasiveness of the medium and potential static electricity issues should be considered). It can be used in the food industry (where American FDA 21 CFR 177.2600 e, f requirements are acceptable) for liquid food substances for hydrated food ("e") and fatty food ("f"). Inner layer: transparent polyurethane. Reinforcement: steel spiral. Outer layer: transparent PVC. Working pressure at 20°C: from 12 bar to 20 bar - depending on the hose diameter. Operating temperature: from -20°C to +90°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe Hyperline FX SS RC BLACK hose is a lightweight, flexible Teflon hose, featuring an additional outer layer made of black, antistatic, and flame-retardant EPDM rubber, meeting the requirements for railway vehicles EN 45545. This provides extra protection for the braid and hose against damage and allows for easy cleaning of the hose. Due to its properties, it is recommended for use in the industrial sector and mechanical vehicles. The hose can be supplied without fittings or as complete assemblies ready for installation. Hose material: smooth on the inside, corrugated PTFE (Teflon) on the outside. Reinforcement: single braid of AISI 304 steel with an additional protective layer of EPDM rubber. Working pressure: from 50 bar to 110 bar, depending on the hose diameter. Operating temperature: from -40°C to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for low-pressure parts of hydraulic power systems, compliant with SAE 100 R6 and ISO 4079 R6 standards. Designed primarily for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids as well as for water and air with a temperature limit of +70°C (air applications may require micro-perforation of the outer layer). Suitable for many liquid products in the petrochemical industry: mineral and synthetic oils, diesel and heating oil, ethylene glycol, and others. Not recommended for gasoline and ester-based oils, unsuitable for aromatic hydrocarbons. Inner layer made of black, smooth synthetic rubber. Reinforcement with textile braid. Outer layer made of black synthetic rubber, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black synthetic rubber. Reinforcement: single textile braid. Outer layer: black synthetic rubber. Working pressure: from 12 bar to 28 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and lightweight pressure hose with a thin wall, almost flat in a resting state, designed for operation in harsh conditions. Used for the transmission of industrial water and wastewater, for submersible pumps, drainage and irrigation systems, mobile irrigation. Resistant to abrasion, weather conditions, and ozone. The hose construction allows for easy coiling after use. Installation using straps or clamps. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: polyester cord. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert for clamp DIN 3015 type 301 made according to standard DIN 3015. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: self-extinguishing polyamide. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling plug with valve and external NPT thread connection. The couplings are available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug DN11.8 with internal thread facilitating quick connection of the water gun to the hose or other washing accessories. Material: AISI 303/304L steel. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEO plug with hose end for use in hydraulic systems where there is not enough space to install the hose in the traditional way. Once connected, the plug has freedom of movement in the socket, which prevents the hoses from twisting during installation. Designed for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for hose size up to 3/4"), 250 bar (for hose size 1"). Material: hardened steel. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type B throttling-check valve (threaded connection with O-ring on one side and plug connection on the other side) regulates the flow of air passing in both directions. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality three-way ball valve "L" type BK3L with internal BSP thread, designed for high-pressure hydraulic installations. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with internal trapezoidal thread compliant with DIN EN 12713 standard and CAMLOCK D (socket) connection. The trapezoidal threads standardly equipped on IBC connectors are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle fitting type B6 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
