Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd piece - insert according to EN14420-4 with a smooth "tail" for mounting with RS shell clamp or for crimping with TI-LR, TI-LDR. For use in the industry, e.g., for connections with flexible hoses. Material: carbon steel, galvanized. Working pressure: up to 25 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded end with a brass nut for high-pressure washers. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK angular fitting with internal BSP thread, 60° cone with o-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S1 with internal BSP thread (with flat gasket), manufactured according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a chrome-plated brass version (nut and sleeve) and in a stainless steel version (end) with a chrome-plated brass sleeve. Material: brass (B), polyurethane (PU) gasket. Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector (four-way) type AI 13510 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 14 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBending lance type ST-85 designed for high-pressure washer. Smooth adjustment of the bending angle of the lance from 20° to 140° allows for cleaning hard-to-reach surfaces such as vehicle undercarriages and roofs, tanks, etc. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT male. Working pressure: up to 210 bar. Operating temperature: up to +150°C. Material: galvanized steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flat (in a resting state), pressure hose designed for water transmission. An economical solution for average working conditions. Used in agriculture, construction, and other industrial sectors. Available in two versions: HIFLAT LD (green) and HIFLAT HD (blue). Inner layer: black PVC. Reinforcement: polyester spacer. Outer layer: green PVC (LD), blue PVC (HD). Working pressure: from 2.5 bar to 10 bar - depending on the hose diameter, temperature, and type of hose (LD, HD). Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for the conveyance of air, dust, powders, wood shavings, fine chips, light bulk materials, etc. Suitable for all types of industries, particularly frequently used for dust extraction and the removal of fine solid particles in the woodworking, furniture, ceramics, and plastics industries. Flexible and elastic, even at low temperatures. Compressible, smoother inside compared to ECO 0.4 hose. Good abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. Wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: ECO – standard version, ECO SE – flame-retardant material version (without fire classification), ECO AS – permanently antistatic version ISO 8031: R <109 Ω, TRGS 727 (6.4.2.4): R <2.5 x 108 Ωm, directive 2014/34/EU (ATEX): can be used in specific explosion hazard zones after risk analysis, ECO SE AS – antistatic and flame-retardant version (available on special request). The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials from recycled clean production waste, renewable energy, closed water cycles, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.6 mm. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialized suction and discharge hose for water and sewage in sanitary installations on ships, motorboats, yachts, etc. Odorless hose that does not allow odors from sewage discharge to escape outside (5-year warranty). The outer layer is resistant to marine factors and weather conditions. It has resistance to vacuum. Compliant with EN ISO 8099 standard. A special version SANITARY STAR / 7 with a working pressure of 7 bar is available upon special order. Standard length: 60 m or 120 m. Inner layer: white synthetic rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: white synthetic rubber. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature angular pressure reducing valve type RMC (threaded connection with an O-ring at the inlet and a plug connection at the outlet) ensures the parallelism of the pipe relative to other installation components due to its geometry. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble nipple with external BSPT thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 double clamp type 301 (with upper plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: self-extinguishing polyamide. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial oil for lubrication and maintenance of pneumatic equipment according to DIN 51 524 – 2 with a viscosity class of VG 32 (according to ISO 3448). This oil contains surfactants that provide corrosion protection over a wide temperature range from -20°C to +80°C. Packaging: 1 l, 5 l.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm clamp with a band width of 9 and 12 mm designed for quick and easy multiple fastening of hoses reinforced with steel spiral, e.g., ventilation hoses. The purpose of the bridge is to encompass the spiral wire and ensure precise adherence of the clamp to the hose. The use of the bridge in the clamp provides a tight and non-damaging connection to the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The unique worm mechanism of the clamp in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple clamping without damaging the hose surface. The number of segments depends on the minimum/maximum diameter of the clamp. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMKV sealing ring with BSP internal thread for TW loading connections. To be used with MKH closing ring. Together they form the MK connection. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Intended for liquids, bulk materials, and gases (except liquefied gas and steam). Material: brass. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Joint sealing (seal type GSD, for 4" type TWO): NBR. Thread sealing (seal type GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension – ready air hose made of WTZ hose with a diameter of 10 mm and a length of 10 or 15 m. Finished with a brass socket (TP-ES72-GK-10) and a plug (TP-ES72-WK-10) of the standard Eurostandard DN 7.2 pneumatic quick coupling. The simplest solution for connecting pneumatic tools. Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: 10 bar. Operating temperature: from -5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSymmetrical reduction (concentric reducer) for butt welding for pressure applications made from seamless pipes, compliant with standard EN 10253-4 (stainless steel). With material certificate EN 10204 3.1. Commonly used in the industry for the construction of installations and pipelines, as components of complete welded ends for metal and rubber hoses (welded with threaded and flanged ends) and other fittings and valve components. Other sizes and materials are also available upon request, including reductions of more than two sizes DN and ASME reductions. For type A fittings (EN 10253-4A), the pressure strength may be slightly lower than for a straight pipe of the same diameter D and thickness T. The working pressure of the reducer can be determined using the pressure correction factor provided in the EN 10253 standards (for the specified sizes approximately 1.0 ÷ 0.9 of the pressure corresponding to the dimensions of the pipe). Other types of fittings for butt welding are available upon special request: 45° and 180° elbows, eccentric reducers, tees, end caps. Material: stainless steel AISI 321, AISI 316Ti. Working pressure: from 61 to 185 bar - depending on the diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand-operated lever grease gun 75/PK silver 500 g without accessories. Body material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSVL silencer with throttling and external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 25 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing "T" fitting with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing tee for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum sleeve for mounting SAFE SLEEVE shields. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBPMTKM clamping sleeve for thermoplastic hoses type MTKM or CNG. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for NITO end with internal thread type A.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetal-rubber gasket DOWTY, metric for high-pressure connections. Material: washer - carbon steel, sealing - NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 853 2SN, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 415 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible double hose used in pneumatic systems, hydraulic systems, tool lines, industrial robots, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Maintains flexibility at low temperatures. Shore hardness (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on hose diameter). Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality silicone hose widely used in the industry (e.g., in cooling systems and for hot air). Exceptionally resistant to mineral oil vapors. Hardness 65° Shore (A). Inner layer: blue silicone. Reinforcement: textile inserts. Outer layer: blue silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose for the transfer of almost all aggressive chemical substances. Specifically designed for the petrochemical industry for fuels with high concentrations of aromatic hydrocarbons, hot oil, and solvents. Due to the high overall chemical resistance of FKM rubber, it can be used for aggressive chemicals, in many cases also at elevated temperatures. Used for the transshipment of chemicals from road and rail tankers. Inner layer made of smooth black FKM fluorine rubber. Reinforcement with synthetic cord and steel spiral. Outer layer made of CR chloroprene rubber, antistatic, resistant to weather conditions, ozone, abrasion, and oils. Two built-in copper wires for discharging electrostatic charges. Compliant with EN 12115:11 (type M). Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50°C. Vacuum: 0.9 bar. Inner layer: black FKM rubber (FPM, viton). Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: 16 bar. Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug DN11.8 with hose end, with flange, facilitating quick connection of the water gun to the hose or other washing accessories. Material: AISI 303/304L steel. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1/2" with a dual hose end, allowing the installation of hoses with two diameters. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for CEJN series 232 quick coupling with a securing chain to protect against contamination and damage. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFPU type throttling and check valve used in hydraulic systems as a component to allow free flow in one direction. The flow throttled in the opposite direction is regulated using a knob. Standard opening pressure 0.5 bar (also available in 2.5, 5, and 10 bar). Permissible flow direction: A → A1 (free), A1 → A (throttled). Material: carbon steel, galvanized (body), steel (spring, stem), plastic (knob). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details1/2" stainless steel ball valve for multifunctional use with water, cleaning agents, foam. Can be used independently or with quick couplings allowing connection of various types of lances and nozzles. Valve secured against opening by falling on its lever. Features a robust EPDM rubber cover protecting the valve and floor from damage in case of a fall. Connections: quick coupling socket DN11.8 in EPDM rubber cover / BSP female thread with flat gasket (viton). Material: AISI 304 steel. Working pressure: up to 60 bar. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact, two-piece medium-pressure ball valve designed for demanding general applications. It can be used for precision instrumentation in the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipeline installation. The valve features a large size range to ensure sufficiently high flow, tight shut-off (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Designed for operation in fully open or fully closed positions. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Ball and stem material: AISI 316 steel. Lever material: AISI 304 steel, PVC. Ball seal: modified PTFE. Stem seal: PTFE. Operating temperature: from -42°C to +204°C. Working pressure: up to 137 bar (depending on temperature). Connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal two-part, flanged ball valve type 2019S with full bore, lever lock, and actuator connection according to ISO 5211, intended for industrial installations. It can be used for air, gases, water, steam, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: stainless steel CF8M. Ball material: stainless steel CF8M. Lever material: stainless steel AISI 304. Ball sealing: PTFE / RTFE. Stem sealing: PTFE. Connection: flange PN16 according to DIN 2501. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAssembly kit for the BIT system (2 plates + 2 screws). Material: galvanized steel.
