Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight ORFS fitting with external BSP thread (rectangular cross-section elastomer seal), type GE-BE. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube connector with hose end type AI 13540 designed for connecting copper pipes to a hose. The range of external diameters of connected pipes is from 6 to 14 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless pipes for pressure applications manufactured according to standard EN 10216-1 for pipes made of carbon steel. With material certificate EN 10204 3.1. Commonly used in the industry for the construction of installations and pipelines. Material: AISI 321 steel (1.4541), AISI 316Ti (1.4571). Standard pipe length (one section): 6 m. Shipping in sections: 1 m or 2 m, longer sections upon agreement of transport costs.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible medium-thickness hose designed for the transport of chips, bulk materials, granules, etc. Suitable for all types of industries, particularly commonly used for the removal of chips and other solid particles in the woodworking, furniture, ceramics, and plastics industries. The medium-thick wall and dense reinforcing spiral provide higher pressure parameters compared to ECO hoses 0.4, 0.6, and 0.7. Very smooth on the inside, low compressibility, and flexible - even at low temperatures. Good abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: ECO – standard version, ECO SE – flame-retardant material version (UL94 V-2), ECO AS – permanently antistatic version (ISO 8031: R <109 Ω, TRGS 727 (6.4.2.4): R <2.5 x 108 Ωm, directive 2014/34/EU (ATEX): can be used in specific explosion hazard zones after risk analysis), ECO SE AS – antistatic and flame-retardant version (available on special order). The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials from recycled clean waste from the production process, renewable energy, closed water circulation, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 1.0 mm. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDHS type BANJO bolt with metric thread, with two holes. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-shaped tee 2x internal BSP thread, 1x external BSPT thread type A13, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO ERGO COMBI water gun with NiTO 1/2" quick coupling (for lance at the outlet). Housing made of high-strength plastic, quick coupling made of chrome-plated brass. It features smooth flow regulation and a trigger lock. Maximum working pressure: 12 bar. Maximum operating temperature: +80°C. Flow rate: 50 l/min (5 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight multi-layer hose with an inner layer made of abrasion and oil-resistant polyurethane, intermediate and outer layers made of thermoplastic blend and PVC. Highly flexible, with a small bending radius, non-kinking. Resistant to ozone, fats, oils, and light chemicals. Designed for compressed air and fluids. Widely used in the industry for pneumatic tools, air for spray guns and water-based paint applications, sandblasting, etc. Suitable for mounting on reels. The inner layer is approved for food contact - compliant with European regulations 1935/2004/EC and 10/2011/EU (simulated fluids A, B, and C), 2023/2006/EC (GMP). Inner layer: transparent polyurethane. Intermediate layer: PVC/PU (black color). Reinforcement: polyester braid. Outer layer: TPE/PVC (turquoise color). Working pressure at 20°C: 20 bar. Operating temperature: from -15°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDOWTY metal-rubber gasket, inch size, for high-pressure connections. Material: washer - AISI 316L steel, sealing - viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with steel spiral reinforcement, intended for hot water mixed with antifreeze fluids. Used in cooling and heating systems, for pumps in engines and machines. It has vacuum resistance. Inner layer resistant to heat and cooling fluids. Outer layer resistant to heat and aging. Rubber mixture compliant with DIN 73411:79 standard. Inner layer: black EPDM rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 4 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility (type COMPACT). Confirmed hose lifespan of 300,000 impulse cycles. Standards: EN 857 1SC, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 90 bar to 225 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrystal clear, flexible, and completely biocompatible medical hose free of phthalates (DEHP). Intended for use in dialysis equipment, blood transfusion and drainage, infusion, chemotherapy, inhalation, minimally invasive procedures, catheters, and medical laboratories. Can be used with peristaltic pumps, but lifespan is limited. High transparency of the hose and non-wettability of the inner surface ensure good flow visualization and easy complete drainage of the hose. Can be connected with mechanical clamps, thermally welded, ultrasonically welded, or glued. Compliant with ISO 10993, European Pharmacopoeia 3.1.1.2, USP Class VI, and REACH requirements. Completely non-cytotoxic, non-hemolytic, and non-pyrogenic. Sterilization by steam in autoclaves, ethylene oxide, or radiation (up to 2.5 Mrad). Full hose roll length is 15 m. Medical hoses of different hardness are available, e.g., TYGON® ND100-80 (hardness 80° Shore (A)). The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: PVC (special, DEHP-free). Maximum operating temperature: +74°C. Brittleness temperature: -42°C. Hardness: 65° Shore (A). Density: 1.19 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyethylene and aluminum pneumatic hose for use in pneumatic control systems. Very good chemical resistance of the outer layer allows operation in chemically aggressive environments. The reinforcement in the form of an aluminum coating increases the hose's durability, enabling the installation of long sections without additional supports. An additional advantage is its so-called shape memory, allowing installation in hard-to-reach places. It can operate buried without the need for additional coverings. Due to its unique construction, the hose is about 5 times lighter than standard pneumatic hoses. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on hose diameter). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, biologically neutral hose manufactured using hydrogen peroxide enhancement technology. Retains chemical, electrical, and mechanical properties at temperatures up to +200°C. Sterilization by steam, ethylene oxide, radiation. Complies with FDA, BfR, USP (class VI), ISO 10993 quality standards (toxicity, irritation, cytotoxicity, hemolysis). Material: translucent silicone. Hardness: 62° ±5° Shore (A). Density: 1.15 ±0.03 g/cm³. Operating temperature: from -50°C to +200°C (temporarily +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose for the transport of anhydrous ammonia in liquid and gaseous form. Inner layer made of thick antistatic rubber (R≤106 Ω/m). Reinforcement with high-strength cord ensures a high safety factor of 5:1. Outer layer made of antistatic rubber (R≤106 Ω/m) resistant to chemicals, abrasion, ozone, and weather conditions, microperforated. Hose compliant with the requirements of standard EN ISO 5771:2008 for rubber hoses for the transport of anhydrous ammonia. The hose is particularly intended for ammonia in the production processes of nitrogen fertilizers, cleaning agents, and for the synthesis of many chemical compounds. It can also be used in other industrial sectors utilizing anhydrous ammonia, such as industrial refrigeration (refrigerant R717 – ammonia, used in large refrigeration systems; flexible hoses are primarily used for filling installations), metallurgy, and many others. The hose can also be used for ammonia dissolved in water - ammoniacal water, widely used in industries such as wastewater treatment (pH regulator), ion-exchange resin regeneration, rubber and plastics industry, and boiler water treatment. Inner layer: black synthetic rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber, microperforated. Working pressure: 25 bar. Operating temperature: from -40°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak Detection Spray - leak detector in spray form. Quickly and reliably locates leaks and cracks in gas connections and installations as well as compressed air systems. It does not cause corrosion, is non-flammable, and skin-friendly. Tested according to DIN-DVGW standards.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose for grease guns with threaded ends. Material of the inner layer: polyethylene.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert for DIN 3015 type 101 clamp made according to DIN 3015 standard. For size group 0, there is one hole for a screw; for size groups 1 to 6, there are two holes for screws. It standardly features a profiled (grooved) surface for the pipe. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick coupling plug with external thread and valve designed for hydraulic installations with very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (connected coupling). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling plug with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1/2" with hose end. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK F connector plug with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, strong clamp with a hinged closure for heavy loads with turned-up edges of the band, recommended for securing thick-walled, reinforced industrial hoses and pipes. The unique design ensures uniform pressure around the entire circumference, providing optimal sealing. The movable bridge allows for multiple installations without the need to remove the hose. Manufactured in accordance with the RoHS Directive 2002/95/EC. Three-point welds on the band, a high-strength screw with a spacer along with securing half-rollers guarantee maximum and reliable pressure. The clamp features markings on the band for minimum and maximum diameter as well as the material from which it is made. The W4 version of the clamp is made entirely of stainless steel and is intended for demanding applications where high corrosion resistance is essential - for marine applications and in the food industry. The hexagonal head of the screw allows the use of commonly used tools such as flat wrenches, socket wrenches, and adjustable wrenches. Important! Exceeding the tightening torque value will cause the screw housing to bend; the use of pneumatic tools for installation is not recommended. The band and bridge are made of AISI 304 steel, while the screw and rollers are made of AISI 302 steel. Maximum working pressure up to 45 bar depends on the type of hose and clamp diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for PERROT lever connector. Material: carbon steel, galvanized. Working pressure: up to 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug with internal BSP thread. Material: AISI 316 steel. Working pressure 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFPMU throttling check valve used in hydraulic systems as a component to allow free flow in one direction. The flow throttled in the opposite direction is regulated by a rotating ring. Standard opening pressure 0.5 bar (also available in 2.5, 5, and 10 bar). Permissible flow direction: A → A1 (free), A1 → A (throttled). Material: galvanized steel (body), hardened steel (stem). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact, two-piece medium-pressure ball valve designed for demanding general applications. It can be used for precision instrumentation in the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipeline installation. The valve features a large size range to ensure sufficiently high flow, tight shut-off (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Designed for operation in fully open or fully closed positions. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Ball and stem material: AISI 316 steel. Lever material: AISI 304 steel, PVC. Ball seal: modified PTFE. Stem seal: PTFE. Operating temperature: from -42°C to +204°C. Working pressure: up to 137 bar (depending on temperature). Connection: BSPT female thread.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4171 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: carbon steel. Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP female thread. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVSR L type quick release valve with both ends terminated with plug couplings (hose - hose), discharge routed through the plug coupling. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter tank and filter-reducer for the BIT system 1/8" and 1/4". Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of jaws for air conditioning for FINN-POWER type P16 crimping press. Material: surface-hardened steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWhite IBC connector with internal trapezoidal thread compliant with DIN EN 12713 standard and external thread for hygienic connections (Rd, IDF, RJT). The trapezoidal threads, which are standardly equipped on IBC connectors, are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled plug connector, type R4, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor made of high-quality polypropylene reinforced with fiberglass, food-safe, intended for use with the most popular and commonly used plastic barrels for storing raw materials (200 liters). Designed to facilitate the installation of, for example, a suction pump or ball valve (tap). A tight connection on the external thread DIN EN 12713 is guaranteed by an O-ring seal. Material: polypropylene reinforced with fiberglass. Seal: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external and internal BSP thread type A5/Z, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is used; for a cylindrical thread, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRDST type adapter with external metric thread, reducing, sealing cone 60°. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNPT threaded tee, type 102H, intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFETYSTAR nozzle extended bent 30° for air guns, finished with metric thread M12x1.25. Reduces noise level to 80 dB. Complies with the following safety standards and directives: OSHA 1-13.1 (European Agency for Safety and Health at Work), 2003/10/EC, 2006/42/EC, EN 12100. Connection: GZ M12x1.25. Material: nickel-plated steel (nozzle), POM (connection). Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose, intended for the transfer of wine, beer, fruit juices, alcohols with a concentration of up to 96%, and other food substances that do not contain fats. The inner layer is odorless and tasteless. It does not contain phthalates and bisphenol A, as well as polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for heavy metals. Thanks to the external corrugation, the hose is exceptionally flexible and elastic. The outer surface of the hose made of thermoplastic material with slippery fabric properties has a very low coefficient of friction, which further facilitates hose handling and eliminates friction with other hoses and equipment components. The recommended method of installation with fittings is special EASY SHELL clamp shells, shaped to fit the hose corrugation. Standards and requirements: Food industry, food contact 1935/2004/EC and 2023/2006/EC (GMP). Inner layer compliant with FDA 21 CFR 177.2600, BfR XXI cat. 2, D.M. 21/03/73. Inner layer: white, smooth butyl rubber (IIR). Reinforcement: synthetic cord, steel spiral. Outer layer: red synthetic rubber with a thermoplastic coating. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° ELBOW RADIATOR designed for engine cooling systems in vehicles and automotive-type engines (for water, ethylene glycol-based coolants). Meets the requirements of standard SAE J20 R4 Class D-1. Available with arm lengths of 200, 250, and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the diameter of the elbow. Operating temperature: from -40°C to +125°C. Safety factor (burst pressure / maximum working pressure) 3:1. coupling material: black EPDM rubber. Reinforcement: textile braid.
