Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp made of a special high-strength material, allowing for easy assembly of hygienic connections to externally corrugated hoses of the EASY series (e.g., VINOFLEX EASY, MILLENNIUM EASY). The clamp features internal grooves precisely matched to the grooves of the EASY series hoses and is designed for the installation of hygienic connections (DIN, SMS, Triclover, and others) with a standard stub for the shell clamp. Working pressure: 10 bar. Material: high-strength plastic.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external BSP thread (rectangular cross-section elastomer seal). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSliding valve, type 4/3, electrically controlled with centering springs, intended for panel mounting. Used in hydraulic systems of industrial machines. Standardly supplied with O-rings and mounting screws. couplings are equipped with diodes indicating power status. Material: cast iron (body), hardened steel (slider). Sealing: NBR. Maximum operating pressure: 315 bar (ports P, A, B), 160 bar (port T). Available for the following control voltages: 12 V DC, 24 V DC, 110 V AC, or 220 V AC. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagon head screw for heavy-duty clamp DIN 3015 complete type 201 with external metric thread. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting tape for information plates of the Band-It® Tie-Lok® system, made of AISI 304 steel. Durable, secure, with a low-profile lock and smooth inner surface. Tape width: 1/4". Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use (range 36x1.5 to 222x4). Material: NBR, hardness 70 Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the removal of dust, wood shavings, and chips in the woodworking and furniture industry. Designed for CNC machines for wood and plastic processing: machining centers, vertical milling machines, milling plotters. The thick steel spiral coated with white PVC is corrosion-resistant, has good adhesion to the hose material, and provides high pressure parameters. Despite its strong construction, due to the optimally selected large spiral pitch, it is very flexible, bendable, and compressible. Particularly recommended for dust and chip extraction from rapidly moving working heads (CNC Router Dust Collection System). Resistant to microbes, hydrolysis, as well as oils and gasoline. Does not contain halogen compounds and plasticizers. Flame-retardant, compliant with the German standard DIN 4102 class B1. The hose can be treated as electrically conductive after grounding the spiral, in accordance with German industrial recommendations BGI 739-2. Installation on couplings with bridge clamps (right-handed). Other diameters in the range of 80 ÷ 600 mm available on special order. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral coated with white PVC. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flat (at rest) industrial PVC suction hose. Thanks to the appropriately selected textile reinforcement with a polyester liner, it has good resistance to elongation. Designed for pressure transmission of water and other liquids. Widely used in agriculture, construction, shipbuilding, mining, etc. Standard roll length: 50 m or 100 m. Inner layer: black PVC. Reinforcement: polyester liner. Outer layer: blue PVC. Working pressure: from 2.5 bar to 8.5 bar - depending on the hose diameter and temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-reverse valve type MRF NMV series COMPACT "N" for installation in the connections of distribution valves, used in pneumatic systems to regulate the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mushroom valve type 2028 with metal-metal sealing and rising stem, intended for industrial installations. Allows for regulation or throttling at low flow rates. Maximum constant working pressure across the full temperature range. Body material: stainless steel CF8M. Disc material: stainless steel CF8M. Handle material: aluminum. Stem sealing: PTFE. Connection: BSP female thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal stop valve (valve installed at the end of the suction pipeline) intended for industrial installations. It can be used for water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve must be installed according to the flow direction indicated on the body, in a vertical position. Maximum constant working pressure across the full temperature range. Minimum opening pressure is directly proportional to the height of the water column above the valve, e.g., for 10 m, the opening pressure is 1.0 bar, for 5 m, the opening pressure is 0.5 bar. Body material: brass. Disc: brass. Disc sealing: NBR. Connection: BSP female thread. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsOne-piece gravity connector OLS, angle 22.5°, CAMLOCK A. Designed for gravity unloading of tankers (operating pressure should not exceed 1 bar). For medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Sealing: NBR. Operating pressure: 6 bar. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angular swivel joints G90 with ball bearing designed for hydraulic oil and other industrial media. Used in systems requiring a rotating connection to eliminate hose stress. The joints are intended for making rotations with low torque. They are not designed for operation at high rotational speeds. Material: AISI 316L steel. Sealing: viton. Connection: GZ / GW BSP. Operating temperature: from -15°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSingle rotary joint with external thread on one side and internal thread on the other side. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled plug connector with a fitting, type R46, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adaptor type A114C with external BSP thread (60° cone seal) and internal BSP thread, with swivel nut (60° cone seal), "compact" version. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug-in four-way connector, type R40, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with external BSP thread, sealing cone 60° (AGR). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting bracket model A for mini cylinder ISO 6432. Cylinder sizes: Ø8, Ø10, Ø12, Ø16, Ø20, Ø25. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-output distribution rail with 1/8" outlets for use in pneumatic systems, allowing the distribution of compressed air under pressure to several other branches. It has additional holes for securing it in the desired installation location. Inlet - internal threads 1/4" BSP, outlet internal threads 1/8" BSP. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Made by casting from aluminum. The gun is equipped with a SAFETYSTAR nozzle, interchangeable, with an external connection thread M12x1.25, bent with a length of 110 mm made of nickel-plated steel. It is ideal for blowing out hard-to-reach areas while improving working conditions by reducing noise levels to 80 dB. Instead of the SAFETYSTAR nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, we distinguish a gun finished with a EUROSTANDARD 7.2 plug, a hose end with a diameter of 6 mm, 9 mm, and 13 mm, or an internal thread of 1/4". Material: aluminum (casting). Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUpper plate for mounting double DIN 3015 clamp complete type 301. Material: carbon steel, galvanized or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle designed for washing and cleaning with water, with a flow regulated by a rotating head. The flow can be completely shut off by fully tightening the head. The mechanism is made of brass, with covers and seals made of EPDM rubber. Available with handles in blue, red, and white (AK-MSHH4-BK - version without handle, GZ 1/2" BSP). When working with hot water, special precautions must be taken. Not intended for steam! Connection: GW 1/2" BSP. Maximum working pressure: 16 bar. Maximum operating temperature: +80°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external UNF thread (sealed with an O-ring). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBIT series MR regulator. Basic version for regulating compressed air pressure in a pneumatic system. Pressure gauge connection: 1/8" BSP. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar, or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting tape for information plates of the Band-It® Tie-Lok® system, made of AISI 304 steel. Durable, safe, with a low-profile lock and a smooth inner surface. Tape width: 1/4". Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use. Material: Viton, hardness 80 Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoated gasket for the female part (socket) of the CAMLOCK coupling. Material: FEP/silicone. Operating temperature: from -60°C to +205°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible suction and discharge hose designed for water-cooled exhaust systems of diesel engines in motorboats and yachts (free discharge of mixed exhaust gases and cooling water). Used in short sections between installation pipes. Inner layer resistant to exhaust gases. Outer layer resistant to fire and weather conditions. Has vacuum resistance. Compliant with Lloyds type certificate 99/00169 (E4), homologated by VTT according to Nordic Boat Standard MC9. Inner layer: black synthetic rubber CR. Reinforcement: synthetic cord, steel spiral. Outer layer: black, corrugated synthetic rubber CR. Burst pressure: ≥ 2 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for the transmission of cold drinking water (+23°C - approvals KTW, DVGW - Germany, WRAS - United Kingdom, D.M.174 - Italy) in industry and applications such as households, campgrounds, etc. The inner layer material is of food-grade quality, odorless and tasteless, ensuring the preservation of unchanged organoleptic properties of water. Free from phthalates. The outer layer is resistant to weather conditions. Standards and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Approval for drinking water: UBA guideline, KTW, DVGW W270, D.M.174, WRAS according to BS 6920. 3) Food industry, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); 21CFR 177.1520, BfR III, 10/2011/EU (inner layer). Inner layer: white plastomer. Reinforcement: synthetic braid. Outer layer: blue synthetic rubber. Working pressure: 20 bar. Operating temperature: -30°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, exceptionally flexible and bendable hose with good chemical resistance and UV radiation resistance. Resistant to hydrolysis and biological corrosion. Free of halogen compounds and plasticizers. Designed for the discharge of air, vapors, and gases. Used in the chemical industry and in ventilation and air conditioning systems in vehicles. Other diameters available in the range of 30 to 610 mm. Chemical resistance verification - chemical resistance table for polypropylene (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Hose material: black soft polypropylene (PP). Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 210 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1" with hose end. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQC6 quick coupling plug compliant with Standard Instrumentation, with external thread NPT, BSPT, or BSP. QC6 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for tightness. Interchangeable with Instrumentation standard quick couplings from other manufacturers. The plug is available in versions without a valve and with a valve. Material: AISI 316 steel. Working pressure: 103 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF OTC series COMPACT "O" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4331 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: carbon steel. Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP female/BSP male. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe needle control valve with BSP internal thread is used to regulate the amount of fluid flowing through the system by changing the cross-section of the flow opening, up to its complete closure. They are intended for air installations, and can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). Needle valves have a brass cone (needle) whose displacement allows for smooth regulation from the fully open position to closed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Needle material: brass. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling used for systems requiring a rotary connection and to eliminate hose stress. Characterized by small dimensions and low torque. Maximum rotational speed is 60 rpm. Can be used for hydraulic oil. Body: brass. Internal shaft: hardened steel. Nut: galvanized steel. Sealing: NBR. Operating temperature: from -40°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVapor recovery connection DVR with probe without valve (CAMLOCK D with BSP thread). For medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Material: aluminum. Sealing: NBR. Working pressure: 6 bar.
