Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible water delivery hose for general use manufactured in France. Multi-layer construction and strong woven reinforcement ensure high flexibility and prevent twisting, facilitating manual handling of the hose. Very good resistance to repeated bending, crushing, and stretching. Low deformation under pressure. Smooth inner layer ensures good flow. Outer layer resistant to abrasion, aging, and UV radiation. Due to its design, particularly recommended for irrigation systems in agriculture, horticulture, as well as in construction and roadworks. Inner layer: two-layer, black PVC. Reinforcement: strong woven polyester braid. Outer layer: two-layer yellow PVC. Working pressure: from 8 bar to 10 bar - depending on hose diameter and temperature. Operating temperature: from -15°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug for water NiTO CLICK 1/2" with internal thread. Supplied with an adapter for thread conversion. NiTO CLICK quick couplings are water quick couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal butterfly valve, wafer type, centric, designed for industrial installations. Used for cold or hot water, drinking water, seawater and demineralized water, alcohols, sodium hydroxide, and other media, considering the chemical resistance of the valve material and sealing. Can be manually opened and closed or operated by a pneumatic actuator. The handle positions the valve in 9 positions: "open," "closed," and intermediate positions. For sizes from DN250, a lever with stepless adjustment is available. Supplied with a lever for size DN300. Complies with the PED Directive 2014/68/EU, has PZH certification and certificates from Bureau Veritas, Det Norske Veritas, and American Bureau of Shipping. Body material: ductile iron EN-GJS-500-7, coated with epoxy 250 ÷ 300 µm. Disc material: stainless steel CF8M. Stem material: stainless steel AISI 304. Lever material: aluminum. Disc and stem sealing: EPDM. Connection: flange PN10/PN16 for DN32 ÷ DN400, ASA150 for DN40 ÷ DN400. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal check valve designed for industrial installations, can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve must be installed according to the flow direction indicated on the body, in a horizontal position. Maximum constant working pressure across the full temperature range. Body material: brass (up to 4"), bronze (5" and 6"). Disc: brass. Connection: BSP female thread. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNR series check valve allowing air flow in only one direction. Working pressure: 2 ÷ 10 bar. Operating temperature: from -10°C to +70°C. Body material: brass OT58. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight rotary joints GIL with ball bearing designed for hydraulic oil and other industrial media. Used in systems requiring a rotary connection to eliminate hose stress. The joints are intended for rotation at low torque. They are not designed for operation at high rotational speeds. Material: AISI 316L steel. Sealing: viton. Connection: GZ / GW BSP. Operating temperature: from -15°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° angle fitting JIC 37° with external thread and internal UNF thread, nut (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled connector with external NPT thread, series S, type PLC. Economic solution for connecting flexible pneumatic hoses with inch calibrated outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for mounting a lance with a foam gun and spraying with GZ 1/2" BSP at the outlet. Material: stainless steel. Working pressure: 24 (maximum working pressure of the gun with the lance connection).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A102 with external BSPT thread (seal on the thread) and external BSP thread (seal cone 60°). Material: AISI 316L and AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, ergonomic white shower nozzle for spraying vegetables, fruits, fish, work surfaces in the food industry, large kitchens, and catering establishments. Made of FDA-compliant polyamide (PA66), with an internal valve made of stainless steel. Seals made of EPDM. Connection: 1/2" BSP male thread. Working pressure: up to 8 bar. Operating temperature: up to +60°C. Weight: 0.3 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter intended for check valves type 2280 and 2281. Material: AISI 304 steel. Connection: GZ BSP. Filter hole diameter: 1.0 mm. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket for water NiTO CLICK 3/4" with internal thread. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket QC4 compliant with Instrumentation Standard, with valve, with external thread NPT, BSPT or BSP. QC4 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for tightness. Interchangeable with Instrumentation standard quick couplings from other manufacturers. Material: AISI 316 steel. Working pressure: 206 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BEL), angular 90° lightweight series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for use on the piston rod to secure, e.g., fork/joint heads (for diameters 32 ÷ 125 mm).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDCL clamp made from a single strip of tape with a snap closure that prevents accidental disconnection. The clamping force is evenly distributed across the clamp, and the smooth inner surface of the tape protects the hose from damage. Easy and quick assembly and disassembly using designated tools. Made of AISI 304 (W4) stainless steel, suitable for use in the food, household appliance, and automotive industries. The colored strap on the clamp facilitates identification. Note: the snap clamp does not have clamping adjustment; the diameter after installation must be precisely matched to the hose. Material: AISI 304 steel. Identification strap available in colors (information provided in the note): blue, green, purple, black, red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gun for air, water, and non-explosive fluids. Designed primarily for blowing out contaminants, including in hard-to-reach places. Characterized by high blowing force. Lightweight construction, ergonomic shape of the gun, and low trigger pull force ensure great working comfort. The gun is standardly equipped with a socket with a 1/4" BSP or 1/4" NPT thread. This model is available in a version with a nozzle featuring a shut-off valve, interchangeable. Compliant with OSHA standard 1-13.1 (European Agency for Safety and Health at Work). A wide range of additional accessories allows for customization to specific application requirements. Material: POM (body), brass (valve). Sealing: NBR. Working pressure: 8 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 backing flange with internal thread for connection to flange fitting, without mounting screws and sealing. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagon head screw for clamp DIN 3015 standard complete type 101 with external metric thread. Material: carbon steel, galvanized or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, single-layer, highly flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Chemically resistant, UV resistant, and aging resistant. Used, among others, for hot air in granulate dryers and film blowers in plastic processing, in paint dryers in printing houses, other industrial dryers, in the electronics industry, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding gases. Smooth inside (when straightened), with a very small bending radius allowing easy installation in tight spaces of equipment and vehicles. Mounted with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: glass fabric impregnated with black CR rubber (Neoprene® - chloroprene rubber). Reinforcement: internal spiral of steel wire, external strand of fiberglass. Operating temperature: from -35°C to +135°C (temporarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible flat-folded suction hose for water for fire pumps, without fittings. Used for fire, rescue, and forestry pumps. In addition to fire-fighting functions, widely used for water transfer in industry, construction, agriculture, and mining. The inner layer is smooth, resistant to mold and rot. The outer layer (braid) has high strength, with a polyurethane coating that does not retain dirt, increasing resistance to abrasion and contact with flames. Certifications: hoses compliant with the technical conditions of the MSWiA Regulation of April 27, 2010. Inner layer: smooth polyurethane. Reinforcement: polyester braid. Outer layer: red polyurethane coating. Working pressure: from 12 bar to 15 bar - depending on the hose diameter. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 145 bar to 420 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable, lightweight, and flexible suction and discharge hose designed specifically for the wine industry for heavier working conditions. Stronger than the LUISIANA hose, with a thicker wall. Hose for demanding applications. Intended for the transfer of water, beer, quality wines, and alcohols with a concentration of up to 20%, juices, beverages, and other food products. Free of phthalates. Not recommended for milk and its derivatives, oils, and fatty food substances. Reinforced with a hard PVC spiral, resistant to impact, provides very good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of flow. The smooth inner surface reduces flow losses and ensures ease of cleaning. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk materials (non-fatty). Abrasiveness and potential static electricity issues should be considered. Standards and requirements: Food industry, contact with food - compliant with European requirements 1935/2004/EC and 10/2011/EU (simulative fluids A, B, and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: hard PVC spiral. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK A connector with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 316 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 7164 with full bore, intended for gas installations, in pressure class MOP 5-20. Complies with the requirements of the PED directive 2014/68/EU and 2009/142/EC, in accordance with standard EN 331 + A1. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP thread. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFive-piece tool set for simple and effective removal of all types of seals (e.g., O-rings), oil seals, etc. The set includes: knurled handle, straight tip, 90° tip, 45° tip, and hook-type tip.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight rotary joint R-GGL with ball bearing designed for hydraulic oil. Used in systems requiring a rotary connection to eliminate hose stress. The joint is intended for rotation with low torque. Not designed for operation at high rotational speeds. Material: galvanized steel. Sealing: NBR. Connection: GW / GZ BSP. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint with two independent paths, internal BSP threads at the inlet, internal BSP threads at the outlet. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary angled plug connector with external tapered thread, type R 31C, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer adapter, high-pressure type A103, with external BSP thread (60° cone seal) and internal BSP thread. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProximity sensor mounting adapter for DST/ST brackets used in actuators of series R1 and ISO 15552. Material: plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable nozzle with variable flow designed for spraying and washing. Flow regulation is achieved by rotation. Connection: hose end 15/20 mm. Working pressure: up to 25 bar. Material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket QC4 compliant with Standard Instrumentation with valve, with LET-LOK® connection, for panel mounting. QC4 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for leaks. Interchangeable with Instrumentation standard quick couplings from other manufacturers. Material: AISI 316 steel. Working pressure: 206 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket for water NiTO CLICK 1/2" with external thread. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK C connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BEL), light series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
