Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: polyurethane. Working pressure: from 210 bar to 250 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Resistant to very low temperatures and harsh weather conditions. standards: SAE 100R18, ISO 3949-R18. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: 210 bar. Operating temperature: from -55°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling hot liquid asphalt, tar, products bituminous. used for loading and unloading tankers road, railway, in plants masses bituminous and in ports. Inner layer: black blend polyacrylic. Reinforcement: cord with wire steel, steel spiral. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -15°C up to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x140 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 2173 l/h. Operating temperature: up to +76°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermoplastic hose terminated with a TEMA 100 plug, with a TA-M-120 plug and a TA-M-150 socket, TEMA 100. Hose length: 2.5 m. Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 245 bar to 350 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn antistatic hose (R 4 Ω/m) intended for conveying non-conductive media. Inner layer: polyamide. Reinforcement: two aramid braids. Outer layer: blue polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for conveying aggressive substances chemical such jak paints, solvents. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for high-pressure systems hydraulic. Inner layer: polyester. Reinforcement: aramid braid + steel braid (UH-OL8M-06 - Reinforcement hose consists of two braids aramid). Outer layer: black polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose double consisting with two cores hose type STANDARD. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, antistatic (R 5 Ω/m) hose intended for natural gas (CNG - Compressed Natural Gas). Used for filling the tanks of CNG-powered vehicles. standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Resistant to salty sea water. Micro-perforated on request (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for natural gas (CNG - Compressed Natural Gas). Used for filling the tanks of CNG-powered vehicles. A twin version with a breather tube is available. standards: ISO 15500-17. Inner layer: conductive black polyamide. Reinforcement: one or two aramid braids + a synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible A hose intended for low-pressure industrial systems. Particularly recommended for autogas (LPG - Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other components of the system. In order to retain LPG type approval, special screw-on fittings made of brass must be fitted. standards: ECE R67-01. Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -25°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Also available in a micro-perforated version (for gases and air). Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 97 bar to 330 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Suitable for operation in an environment of high humidity and salty air. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 165 bar to 350 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. Exceeds the requirements of SAE 100R8, ISO 3949-R8. Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Resistant to salty sea water. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Resistant to very low temperatures and salty sea water. Suitable for operation in an environment of high humidity and salty air. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the hose diameter. Operating temperature: from -54°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyamide. Reinforcement: a double polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x13.5 cm or 100 cm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1136 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to oils, greases and hot chips hose intended for low-pressure feeding liquid or gas coolant at treatment metals. has tzw. memory shape, co allows on precision directing a stream substances cooling. supplied in the molds ready lines with connection with a male BSP thread ending metric a thread external. Material: black PVC. Reinforcement: steel A guard leading, Diameter DN 10 has additional spiral cover with nickel-plated sheet steel. Working pressure: 4 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x15 cm or 100 cm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 1900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a female NPT thread in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 350 mm. number segments: 14 pcs Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a female NPT thread in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 20 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a female NPT thread in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 16 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a male NPT thread in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 350 mm. number segments: 14 pcs Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
