Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight smooth-walled hose made of PTFE with excellent chemical resistance in various color versions. Made from high-quality PTFE with added dye (material compliant with FDA). Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Application for high-quality plug connections is possible. Safety factor n=4:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Material: PTFE (Teflon), dyed. Shore hardness (D): 60. Working pressure: from 5.5 to 20 bar. Operating temperature: from -200°C to +260°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal industrial hose designed for washing floors and equipment with hot water in the meat, food, dairy industries, etc. The inner layer meets FDA 21 CFR 177.2600 and BfR XXI category 3 requirements. The outer layer complies with ISO 22196:2011 (Ref.1), is antibacterial, and resistant to animal and vegetable fats. The outer layer is resistant to weather conditions, ozone, and abrasion. The hose is also intended for drum reels. Inner layer: white smooth synthetic rubber. Reinforcement: synthetic braid. Outer layer: blue PVC/NBR rubber. Working pressure: 10 bar. Operating temperature: from -20°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong pressure hose designed for cooling water in foundries, smelters, and all applications where rubber hoses operate close to a heat source. Glass fiber covering resistant to temperatures up to +530°C caused by thermal radiation. Used in cooling systems. Particularly recommended for water installations near metallurgical furnaces. Resistant to short-term exposure to splashes of molten hot metal. Non-conductive – electrical resistance of the rubber compound ≥108 Ω/m. Inner layer: white insulating EPDM rubber. Reinforcement: synthetic cord. Outer layer: EPDM rubber covered with glass fiber. Working pressure: 20 bar. Operating temperature: from -40°C to +120°C (external up to +530°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose intended for air, water, and other media. Resistant to chemicals, physiologically safe, tasteless. Meets BGA and FDA requirements. Available in natural, black, and blue colors. Hose material: LDPE polyethylene. Working pressure: from 5 bar to 17 bar, depending on the hose diameter. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose - spiral nylon polyamide tube intended for all types of pneumatic devices, control systems, etc. Finished on both ends with a straight section of 100 mm in length and external BSPT threaded fittings. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on hose diameter). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for the transmission of LPG (liquid and gas) and natural gas. The outer layer is resistant to ozone and weather conditions. Antistatic (R <106 Ω/m). It has a copper wire ensuring electrical continuity between the hose ends. Manufactured according to standard EN 1762:2018, type D. Inner layer: black synthetic rubber. Reinforcement: synthetic braid. Outer layer: black micro-perforated synthetic rubber. Working pressure: 25 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a factor of 4:1 is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170ºC, the maximum working pressure for the hose AF-SWSB-06 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 55 bar to 240 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnreinforced and highly flexible transparent PVC hose intended for non-pressurized (or very low-pressure) transfer of water, beer, wine, alcohols with a concentration of up to 20%, juices, beverages, and other food liquids. Not recommended for milk and dairy products, as well as oils and fatty food substances. Also used for liquids in general industrial applications, for light chemicals (e.g., diluted acids and bases), and as a protective cover for pipes, conduits, hoses, etc. For the hose, the stated pressure value is an indicative value of the recommended working pressure, assumed for a typical PVC hose, with a safety factor of 5:1. The use of the hose for a specific working pressure should be preceded by testing under working conditions. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Working pressure: low, up to several bar, depending on temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWidely used for washing floors and industrial equipment with hot water. Also suitable for outdoor use. Resistant to weather conditions and abrasion. Not resistant to oil, not recommended for air with oil mist. Compared to the "Tubes 2116," it has a thicker wall. Inner layer: white EPDM rubber. Reinforcement: polyester braid. Outer layer: red or blue micro-perforated EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Compliant with DIN 73378 standard. Available in colors: natural, blue. Hose material: polyamide PA 12 (nylon). Working pressure: from 11 bar to 40 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, crack-resistant, and kink-resistant spiral hose designed for pneumatic installations in automotive braking systems. Resistant to oil, gasoline, ozone, and UV radiation. Maintains high flexibility at low temperatures. Finished on both ends with external metric threaded fittings. The stated total length is the maximum length of the hose when stretched. Available in yellow and red. Hose material: polyurethane. Spring material: galvanized steel. Maximum working pressure: 10 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose with a smooth inner surface designed for compressed air, water, light chemicals, fungicides, fertilizers, and pesticides. Commonly used in agriculture for spraying, irrigation, and applications. The outer layer is resistant to abrasion and weather conditions. Inner layer: black PVC. Reinforcement: polyester braid (double polyester braid for REFITTEX 80 BAR version). Outer layer: black PVC. Working pressure at 20°C: 20 bar (white stripe), 40 bar (blue stripe), 80 bar for internal diameter 13 mm, above 50 bar (red stripe). As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble welding hose for oxygen and acetylene. Manufactured according to ISO 3821 standard. Inner layer: black synthetic rubber. Reinforcement: double polyester braid. Outer layer: smooth synthetic rubber in red (acetylene) and blue (oxygen). Working pressure: 20 bar. Operating temperature: from -32°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The heavy-duty HW version is recommended for harsher working conditions, gases (up to 100 bar), and applications where cyclic temperature changes occur. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a 4:1 factor is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for hose AF-HWSB-06 is: 260 bar – (170°C-130°C) x 0.75 = 260 bar – 30% = 182 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 55 bar to 240 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed specifically for the transfer of AdBlue® (AUS32, DEF) - 32.5% aqueous urea solution. The inner layer of the hose consists of black, smooth, antistatic (R‹10^6 Ω/m) EPDM rubber vulcanized without sulfur. The inner layer of the hose is free from contaminants such as aluminum, calcium, chlorine, copper, iron, potassium, magnesium, sodium, nickel, and zinc, ensuring the highest purity of the medium in accordance with ISO 22241-2. This is particularly important in the automotive industry, where AdBlue® acts as a reductant to decompose harmful nitrogen oxides in the SCR catalyst. Its use allows compliance with European emission standards EURO 4, 5, and 6. For AdBlue® to be effective, it must be very pure, necessitating the use of specialized hoses, tanks, and fittings that are resistant to AdBlue® and do not contaminate it. Ends and fittings for AdBlue® should be made of stainless steel or suitable plastic. Besides automotive applications, the hose is also used in the chemical industry, for example, in the production of nitrogen fertilizers. Inner layer: black EPDM rubber. Reinforcement: synthetic braid. Outer layer: black EPDM rubber. Working pressure: 10 bar or 20 bar. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for conveying saturated steam, with good resistance to high temperature, abrasion, and ozone. Available on request, hose according to standard EN ISO 6134:2005 type 1 class A. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: synthetic cord. Outer layer: black EPDM rubber. Working pressure: 6 bar. Operating temperature: from -40°C to +165°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong hose designed for oxygen lances in the metallurgical industry. The outer layer is self-extinguishing and made according to ASTM C 542 standard. Inner layer: black CR rubber. Reinforcement: double textile cord, fiberglass spacer. Outer layer: yellow or blue CR rubber. Working pressure: 30 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible PVC hose reinforced with double polyester braid designed for washing under medium pressure with cold and hot water as well as light chemicals in the food industry. It features exceptional temperature resistance - up to +70° at a working pressure of 40 bar. Compliant with European requirements for food substances 1935/2004 CE and 2007/19/CE (simulated fluids A, B, C). Use crimped fittings for THERMOCLEAN hoses. Inner layer: gray, smooth PVC. Reinforcement: double polyester cord. Outer layer: blue PVC. Working pressure: 80 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for hot water mixed with antifreeze fluids. Used in cooling and heating systems, for pumps in engines and machines. Inner layer resistant to heat and cooling fluids. Outer layer resistant to heat and aging. Manufactured according to standard DIN 73411:79. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: synthetic cord. Outer layer: black EPDM rubber. Working pressure: from 2 bar to 4 bar - depending on the hose diameter. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyurethane spiral hose designed for pneumatic control systems, hand tools, industrial robots, etc. Resistant to abrasion, rupture, and kinking, successfully used in the automotive industry as well. Its high flexibility is maintained even after many years of use. Finished on both ends with straight sections of 100 mm and 500 mm and external BSPT threaded ends (without springs for an outer diameter of 16 mm). The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 17 bar (depending on hose diameter). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible pressure hose with steel reinforcement for conveying saturated steam. The inner layer has good resistance to high temperatures, saturated steam, and the phenomenon of pop-corning (destruction of the inner layer due to the ingress of steam condensate). It can temporarily withstand superheated steam at a temperature of 230°C and a pressure of 18 bar; prolonged use with superheated steam reduces the hose's lifespan. The outer layer is resistant to temperature, weather conditions, abrasion, and aging. The hose is used in the chemical, petrochemical, and energy industries, as well as in other industrial applications. It is not intended for steam cleaners ("dry steam cleaners"). For steam, use special screw-on fittings designed for steam. To extend the lifespan, the hose should be emptied of steam after use to avoid condensate accumulation. Safety factor: 10:1. Standard length: 60 m. Inner layer: black IIR rubber. Reinforcement: double steel wire braid. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for high-pressure grease lubrication systems. Standard: DIN 1283. Inner layer: polyester. Reinforcement: single synthetic braid. Outer layer: polyurethane (130A), micro-perforated polyurethane (130C). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal flexible high-quality polyurethane hose with a braid produced in the United Kingdom. Designed for water, air, oils, fuels, lubricants, chemicals, and granules. Stronger than similar PVC hoses, maintaining its shape, resistant to kinking, hydrolysis, and abrasion, flexible at low temperatures. Contains no cadmium, silicone, plasticizers, or halogen compounds. Inner layer: transparent polyurethane-polyether. Reinforcement: polyester braid. Outer layer: transparent polyurethane-polyether. Working pressure at 20°C: from 10 bar to 20 bar - depending on the hose diameter. Operating temperature: from -30°C to +70°C (temporarily +100°C). As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose used in systems where frequent contact with water occurs (high resistance to microorganisms and hydrolysis), detergents, and solvents. Maintains high flexibility at low temperatures, resistant to abrasion and kinking. Calibrated outer diameter allows compatibility with plug couplings. Shore hardness (A): 98°. Complies with FDA requirements. Available in natural, black, blue, green, and red colors. Hose material: polyether-polyurethane. Working pressure: from 16 bar to 24 bar, depending on hose diameter. Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible spiral hose over a wide temperature range, resistant to abrasion, welding sparks, and hot metal chips. Designed for pneumatic control systems, hand tools, industrial robots, etc. Resistant to UV radiation and aging. Finished on both ends with straight sections of 100 mm and 500 mm and external BSPT threaded ends. Shore hardness (A) 98°. The stated total length is the maximum length of the hose when stretched. Hose material: flame-retardant polyurethane PUR. Working pressure: up to 13 bar (depending on hose diameter). Operating temperature: from -40°C to +70°C. Standards: UL 94 VO (outer layer). Color black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for low-pressure parts of hydraulic power systems, compliant with SAE 100 R6 and ISO 4079 R6 standards. Designed primarily for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids as well as for water and air with a temperature limit of +70°C (air applications may require micro-perforation of the outer layer). Suitable for many liquid products in the petrochemical industry: mineral and synthetic oils, diesel and heating oil, ethylene glycol, and others. Not recommended for gasoline and ester-based oils, unsuitable for aromatic hydrocarbons. Inner layer made of black, smooth synthetic rubber. Reinforcement with textile braid. Outer layer made of black synthetic rubber, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black synthetic rubber. Reinforcement: single textile braid. Outer layer: black synthetic rubber. Working pressure: from 12 bar to 28 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and lightweight pressure hose with a thin wall, almost flat in a resting state, designed for operation in harsh conditions. Used for the transmission of industrial water and wastewater, for submersible pumps, drainage and irrigation systems, mobile irrigation. Resistant to abrasion, weather conditions, and ozone. The hose construction allows for easy coiling after use. Installation using straps or clamps. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: polyester cord. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose designed for washing floors and equipment with hot water in the food, dairy, paper industries, etc. Also suitable for outdoor use. Resistant to weather conditions, ozone, and abrasion. Inner layer: white SBR rubber. Reinforcement: synthetic braid. Outer layer: white SBR rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality rubber pressure hose manufactured in the USA with an inner layer made of chemically resistant polyamide (nylon). The very smooth inner surface reduces flow losses and ensures ease of cleaning. Reinforcement with synthetic textile braiding provides high pressure resistance and low deformation under pressure. The smooth outer layer made of synthetic rubber is resistant to contact with chemicals and oil (RMA Class B – medium resistance). For hoses with an inner diameter of 1/4" and 3/8", the outer layer is antistatic R<106Ω. The hose is intended for industrial applications, particularly for organic solvents and petrochemical substances. The good resistance of polyamide to many solvents allows the hose to be used in the paint industry for the transfer of paints, varnishes, adhesives, and resins. Chemical resistance and potential static electricity issues must always be considered. In particular, antistatic hoses with diameters of 1/4" and 3/8" are widely used as pressure feed hoses for spray guns in automotive workshops, construction, and industry. Chemical resistance verification: chemical resistance table for PA (preliminary selection), confirmation of resistance and application conditions by Tubes International. Installation: smooth fittings with a spigot ("tail" for the hose) without sharp or high ribs that could cut or damage the inner polyamide layer when tightened should be used. Typical hydraulic fittings can be used. The spigot diameter should be precisely matched to the hose diameter to ensure sealing. Installation depending on working pressure with hose clamps, crimp fittings, or for larger diameters with shell clamps. Typical factory hoses for spray guns often have reusable screw fittings. Inner layer: polyamide (PA), silicone-free. Reinforcement: single textile braid for 1/4" and 3/8", double for 1/2". Outer layer: black synthetic rubber. Working pressure: 52 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial high-pressure version of the SMOOTHBORE Teflon hose with a thickened wall made of specially processed Teflon (reduced microporosity) for applications with high-pressure gases in a double braid (aramid and steel braid) and with an outer layer of Hytrel. The outer layer of Hytrel is available in four colors: black, blue, green, and red, to indicate the hose's intended use for a specific type of gas. When both HPG inner layer and AS antistatic layer are required, the HPG/AS hose (red color) can be used, featuring an additional thin AS antistatic layer inside the primary inner layer of natural HPG Teflon. Installation: use AF-TL series fittings and sleeves... Hose material: smooth PTFE (Teflon) HPG. Reinforcement: aramid braid + AISI 304 steel braid. Outer layer: microperforated Hytrel (colored polyester). Working pressure: 300 bar. Operating temperature: from -50°C to +70°C (due to the outer layer of Hytrel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong pressure hose designed for the transmission of water or compressed air in irrigation systems, agriculture, mines, construction sites, etc. The inner layer is smooth, ensuring minimal flow loss. The outer layer is slightly longitudinally ribbed, which increases abrasion resistance and protects against contact with hot elements. Resistant to abrasion, ozone, weather conditions, oil, fuels, and a wide range of chemicals. Lighter and more flexible than standard rubber hoses. Flat when at rest, facilitating handling and storage. Does not require washing and drying. Resistant to longitudinal loads – during unwinding and pulling (longitudinal force should never exceed 1/3 of the specified breaking force, installation of fittings should consider longitudinal force). Use for air should always be preceded by a risk analysis in case of accidental disconnection or rupture of the hose. Hose material: black NBR/PVC blend embedded in a polyester-polyamide braid during the hose extrusion process. Working pressure: from 10 bar to 25 bar (water), from 7 bar to 18 bar (air) - depending on the hose diameter. Operating temperature for water: from -20°C to +80°C, temporarily up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for high-pressure centralized lubrication systems. Standard: DIN 1283. Inner layer: polyethylene blend. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -20°C to +40°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality universal hose designed for air, cold and hot water, oil, hydraulic fluids, light chemicals, diluted acids, cleaning fluids. Strong and flexible, resistant to twisting and kinking. Non-soiling outer layer, weather-resistant, abrasion-resistant, and oil-resistant. Due to its high durability and low elongation, it is particularly recommended for drum reels. The hose is non-conductive (R > 1 MΩ per inch of hose length at 1000 V DC). Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: blue (red for diameter 15.9 mm) Chemivic® rubber blend (NBR/PVC). Working pressure: 21 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the transmission of various chemical substances, mainly for acid solutions, bases, ketones, aldehydes, industrial alcohols, and glycols. Basic, classic rubber chemical hose. Frequently used in industrial plants and wastewater treatment facilities for discharging contaminated water and process water. Also suitable for seawater. Inner layer made of antistatic (R ≤ 10^6 Ω/m) EPR rubber (other designation: EPM). Reinforcement made of high-strength cord. Outer layer made of antistatic (R ≤ 10^6 Ω/m) EPR (EPM) rubber resistant to chemicals, abrasion, ozone, and weather conditions. Both inner and outer layers are antistatic. Inner layer: black EPM (EPR) rubber. Reinforcement: synthetic cord. Outer layer: black EPM (EPR) rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for washing with cold and hot water as well as light chemicals. Recommended for use in the food industry. Compliant with European regulations for food substances 1935/2004 CE and 2007/19/CE (simulated fluids A, B, C). Compatible with TR-THERMO-12-BZ130-08-SS and TR-THERMO-12-BZ140-08-SS fittings. Inner layer: gray, smooth PVC. Reinforcement: double polyester braid. Outer layer: blue PVC. Working pressure: 80 bar. Operating temperature: from -10°C to +80°C (for 80 bar up to +50°).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made according to hydrogen peroxide enhancement technology. Resistant to UV radiation, oxygen, and ozone. Widely used in industry and household appliances. Sterilization by steam, ethylene oxide, or radiation. Meets FDA and BfR requirements. Material: translucent silicone. Hardness: 57° Shore (A). Density: 1.15 g/cm³. Operating temperature: from -50°C to +200°C (temporarily +220°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible delivery hose, flat-foldable, for water to hydrants and equipment used by fire services. Supplied with mounted aluminum STORZ type fittings (complete hose), compliant with the technical conditions of the MSWiA Regulation of April 27, 2010, and has a CNBOP-PIB approval certificate. The hydrant hose complies with the EN 14540 standard and is used in internal hydrants according to EN-671-2. The pump hose is used for fire pumps, rescue pumps, and forestry services. In addition to fire-fighting functions, it is widely used in industry, construction, agriculture, and mining. Also available in a yellow luminescent version (DN52, DN75, 20m, for pumps). It can be used for the transmission of water, seawater, industrial water, and solutions of certain chemical substances. Inner layer: PVC insert (PU for DN110). Reinforcement: polyester braid. Working pressure: from 12 bar to 15 bar - depending on the hose diameter. Operating temperature: from -30°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality cleaning hose for the food industry. High abrasion and kink resistance. Excellent resistance to oils and fats. Suitable for use in the food, dairy, etc. industries. Inner layer compliant with FDA 177:2600. Inner layer: black NBR rubber compound. Reinforcement: synthetic braid. Outer layer: blue Carbryn® rubber protected with Microban coating. Working pressure: 20 bar. Operating temperature: from -30°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, highly flexible, unreinforced hose designed for non-pressurized (or very low-pressure) transfer of air, water, and liquids in general industrial applications, light chemicals (e.g., diluted acids and bases), and as a protective cover for pipes, conduits, hoses, etc. It can be used (at temperatures up to +40°C) for food substances such as juices, beverages, beer, wine, alcohols with concentrations up to 50%, milk, and its derivatives. Not recommended for oils and fatty food substances. The CRISTALLO EXTRA hose complies with European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C, and D1), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). The stated working pressure is an indicative value of the recommended working pressure with a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: from -20°C to +60°C, working pressure dependent on temperature.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunctional, lightweight, exceptionally flexible and elastic hose resistant to oil and gasoline. Designed for air, water, oils, fuels, lubricants, chemicals (e.g., light acids and bases), pesticides, fertilizers, etc. Smooth outer layer resistant to weather conditions, aging, ozone, UV radiation, non-soiling. Popular and widely used in industry, construction, agriculture, automotive workshops. Inner layer: black NBR/PU/PVC blend. Reinforcement: polyester braid. Outer layer: black NBR/PVC blend. Working pressure: 25 bar. Operating temperature: from -20°C to +70°C.
