Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsExceptionally flexible hose designed for compressed air. Due to features such as: lightweight, flexibility at low temperatures, resistance to elongation, it is particularly recommended for pneumatic tools, compressors, hose reels, etc. Inner layer: black PVC. Reinforcement: polyester braid. Outer layer: blue PVC. Working pressure: 15 bar. Operating temperature: from -20°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, highly flexible, resistant to twisting and bending universal industrial hose. Used in industry, construction, agriculture, quarries, mining, and road construction, in the oil and shipbuilding industries. The inner layer is resistant to oil, grease, light chemicals, air, kerosene, cold and hot water. The outer layer has very good abrasion resistance and resistance to animal fats and oils. Due to its high strength and low expansion, it is particularly recommended for drum reels. Outer flame resistance complies with MSHA standard 2G-14C/39. Non-conductive (R > 1 MΩ per inch of hose length at 1000 V DC). Inner layer: black NBR rubber. Reinforcement: aramid braid, for 2" synthetic braid. Outer layer: yellow Carbryn® rubber (XNBR, carboxylated NBR). Working pressure: 35 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for cooling water in foundries, casting plants, and all applications where rubber hoses operate close to a heat source. Glass fiber covering resistant to temperatures up to +530°C caused by thermal radiation. Used in cooling systems. Particularly recommended for water installations near metallurgical furnaces. Resistant to short-term exposure to splashes of molten hot metal. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: synthetic cord. Outer layer: EPDM rubber covered with glass fiber. Working pressure: 10 bar. Operating temperature: from -40°C to +120°C, external up to +530°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Available in colors: natural, black, blue, red, yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 19 bar to 28 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -40°C to +80°C (for water-based media +70°C). Standard: SAE J 844 (diameters from 1/8" to 5/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension - ready rubber air hose made of MPX20 hose. Finished with a brass socket and Eurostandard DN7.2 quick coupling plug (compatible with standard connections). For general use, particularly for pneumatic tools, where a rubber hose with antistatic properties is required. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose for water and air. Widely used for washing floors and industrial equipment with hot water. Suitable for outdoor use as well. Resistant to weather conditions, ozone, and abrasion. Not resistant to oil, also not recommended for air with oil mist. Inner layer: black EPDM rubber. Reinforcement: polyester braid. Outer layer: red EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C (temporarily up to 120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, and flexible hose made of fluoroelastomer (Viton), resistant to fuels, solvents, oils, and chemicals, particularly at elevated temperatures. Used for concentrated acids, bases, alcohols, chlorinated and aromatic solvents, hot fuels, and oils. Suitable for peristaltic pumps. Resistant to aging, ozone, sunlight, and weather conditions. Flame-retardant. The opaque black wall of the hose protects light-sensitive substances. Used in laboratories and general industrial applications. Provides an economical alternative to VERSILONTM F-5500-A hose. Full roll length of the hose is 50 m (for internal diameters from 4 mm to 12 mm - 25 m, from 15 mm - 5 m). The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: fluorine rubber (FKM). Operating temperature: from -20°C to +200°C (temporarily up to +300°C). Brittleness temperature: -20°C. Hardness: 60° Shore (A) - for 4x6 mm, 70° Shore (A) - for 4x8 mm. Density: 1.90 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReinforced polyester silicone hose is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Standard length: 1000 mm (also available in a 2000 mm section). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approximately 65° Shore (A), density approximately 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 0.86 bar to 8.75 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for the transmission of almost all aggressive chemical substances. Specifically designed for the petrochemical industry for fuels with high concentrations of aromatic hydrocarbons, hot oil, and solvents. Due to the high overall chemical resistance of FPM rubber, it can be used for aggressive chemicals, in many cases also at elevated temperatures. The inner layer is made of smooth black FKM fluorine rubber. Reinforcement with synthetic cord. The outer layer is made of CR chloroprene rubber, resistant to weather conditions, ozone, abrasion, and oils. Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50ºC. Inner layer: black FKM rubber (FPM, viton). Reinforcement: synthetic cord. Outer layer: black CR rubber. Working pressure: 10 bar. Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose connector RADIATOR intended for engine cooling systems in vehicles and automotive-type engines (for water, coolant fluids based on ethylene glycol). Meets the requirements of standard SAE J20 R4 Class D-1. Available as a simple connector with a length of 1000 mm. Working pressure: from 0.6 bar to 3.7 bar, depending on the diameter of the connector. Operating temperature: from -40°C to +125°C. Safety factor (burst pressure / maximum working pressure) 3:1. Connector material: black EPDM rubber. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight multi-layer hose with an inner layer made of abrasion and oil-resistant polyurethane, intermediate and outer layers made of thermoplastic blend and PVC. Highly flexible, with a small bending radius, non-kinking. Resistant to ozone, fats, oils, and light chemicals. Designed for compressed air and fluids. Widely used in the industry for pneumatic tools, air for spray guns and water-based paint applications, sandblasting, etc. Suitable for mounting on reels. The inner layer is approved for food contact - compliant with European regulations 1935/2004/EC and 10/2011/EU (simulated fluids A, B, and C), 2023/2006/EC (GMP). Inner layer: transparent polyurethane. Intermediate layer: PVC/PU (black color). Reinforcement: polyester braid. Outer layer: TPE/PVC (turquoise color). Working pressure at 20°C: 20 bar. Operating temperature: from -15°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, biologically neutral hose manufactured using hydrogen peroxide enhancement technology. Retains chemical, electrical, and mechanical properties at temperatures up to +200°C. Sterilization by steam, ethylene oxide, radiation. Complies with FDA, BfR, USP (class VI), ISO 10993 quality standards (toxicity, irritation, cytotoxicity, hemolysis). Material: translucent silicone. Hardness: 62° ±5° Shore (A). Density: 1.15 ±0.03 g/cm³. Operating temperature: from -50°C to +200°C (temporarily +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose for the transport of anhydrous ammonia in liquid and gaseous form. Inner layer made of thick antistatic rubber (R≤106 Ω/m). Reinforcement with high-strength cord ensures a high safety factor of 5:1. Outer layer made of antistatic rubber (R≤106 Ω/m) resistant to chemicals, abrasion, ozone, and weather conditions, microperforated. Hose compliant with the requirements of standard EN ISO 5771:2008 for rubber hoses for the transport of anhydrous ammonia. The hose is particularly intended for ammonia in the production processes of nitrogen fertilizers, cleaning agents, and for the synthesis of many chemical compounds. It can also be used in other industrial sectors utilizing anhydrous ammonia, such as industrial refrigeration (refrigerant R717 – ammonia, used in large refrigeration systems; flexible hoses are primarily used for filling installations), metallurgy, and many others. The hose can also be used for ammonia dissolved in water - ammoniacal water, widely used in industries such as wastewater treatment (pH regulator), ion-exchange resin regeneration, rubber and plastics industry, and boiler water treatment. Inner layer: black synthetic rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber, microperforated. Working pressure: 25 bar. Operating temperature: from -40°C to +55°C.
Select options This product has multiple variants. The options may be chosen on the product page / Details90° ELBOW RADIATOR designed for engine cooling systems in vehicles and automotive-type engines (for water, ethylene glycol-based coolants). Meets the requirements of standard SAE J20 R4 Class D-1. Available with arm lengths of 200, 250, and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the diameter of the elbow. Operating temperature: from -40°C to +125°C. Safety factor (burst pressure / maximum working pressure) 3:1. coupling material: black EPDM rubber. Reinforcement: textile braid.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flat (in a resting state), pressure hose designed for water transmission. An economical solution for average working conditions. Used in agriculture, construction, and other industrial sectors. Available in two versions: HIFLAT LD (green) and HIFLAT HD (blue). Inner layer: black PVC. Reinforcement: polyester spacer. Outer layer: green PVC (LD), blue PVC (HD). Working pressure: from 2.5 bar to 10 bar - depending on the hose diameter, temperature, and type of hose (LD, HD). Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension – ready air hose made of WTZ hose with a diameter of 10 mm and a length of 10 or 15 m. Finished with a brass socket (TP-ES72-GK-10) and a plug (TP-ES72-WK-10) of the standard Eurostandard DN 7.2 pneumatic quick coupling. The simplest solution for connecting pneumatic tools. Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: 10 bar. Operating temperature: from -5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality silicone hose widely used in the industry (e.g., in cooling systems and for hot air). Exceptionally resistant to mineral oil vapors. Hardness 65° Shore (A). Inner layer: blue silicone. Reinforcement: textile inserts. Outer layer: blue silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 90° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arm lengths of 152, 250 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester inserts. Working pressure: from 1.83 bar to 8.75 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible general-purpose hose reinforced with a braid for compressed air, water, and light chemicals. It can be used (at temperatures up to +40°C) for liquid and semi-liquid food products such as juices, beverages, beer, wine, alcohols with a concentration of up to 50%, milk, and its derivatives. It is not recommended for oils and fatty food substances. The REFITTEX CR hose complies with European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C, and D1), 2023/2006/EC (GMP). It is suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure: from 5 bar to 30 bar, depending on the hose diameter. Operating temperature: from -20°C to +60°C, working pressure dependent on temperature.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, transparent, flexible hose made of patented thermoplastic elastomer for biotechnological applications. Suitable for use in peristaltic pumps. Non-toxic, non-hemolytic, and apyrogenic with high purity class, easily thermally weldable, which is essential in biotechnological processes. Sterilization possible in autoclave, radiation, and ethylene oxide. Resistant to concentrated acids and bases. Meets USP Class VI requirements. Hose material: thermoplastic elastomer. Hardness: 60° Shore (A). Operating temperature: from -45°C to +135°C. Key features: thermal welding using C’eal-Flex™ TPE Ultra Sealer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight economical hose, flat in a resting state, designed for water transmission. An economical solution for low working pressures and non-demanding working conditions. Used in agriculture, e.g., for irrigation of crops, construction, and other industrial sectors. Hose material: blue PVC. Reinforcement: polyester layer. Working pressure: 3 bar. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality multifunctional flexible hose produced in the United Kingdom. Designed for water, air, and light chemicals. The hose material is free from phthalates, silicone, and cadmium, compliant with RoHS and WEEE regulations. According to EU requirements, use for food products is possible after conducting the required migration tests using appropriate model fluids simulating the specific type of food (the material used for hose production complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing according to UL94-V2 and UL94-HB (at a thickness of 3 mm). Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: red (R) or blue (BL) PVC. Working pressure: from 10 bar to 18.3 bar - depending on the hose diameter. Operating temperature: from -20°C to +55°C (temporarily +65°C, cold bending temperature down to -45°C). As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed specifically for transporting cooling water, used in metallurgical furnaces, transformer cooling systems, and electrical converters. Used in steel metallurgy. The outer layer is coated with fiberglass resistant to heat radiation up to +550°C (temporarily) and splashes of hot materials. The inner layer is insulating (dielectric), R>10^11Ω, resistant to electrical breakdown E≥6000 V/mm, with increased resistance to water and steam penetration under extreme operating conditions. The minimum bending radius in the technical specifications is given for pressures above 3 bar. Inner layer: light blue, insulating EPDM rubber. Reinforcement: synthetic cord. Outer layer: EPDM rubber coated with fiberglass. Working pressure: 20 bar. Operating temperature: from -35°C to +120°C, external up to +550°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made according to platinum-enhancing technology of exceptional purity, intended for biotechnological applications. Resistant to high temperatures, ozone, radiation, moisture, and atmospheric conditions. Does not adsorb or absorb odor or taste. Can be repeatedly sterilized in an autoclave as well as with ethylene oxide or radiation. Meets FDA, USP Class VI, ISO 10993, European Pharmacopoeia 3.1.9, and Japanese Pharmacopoeia - Chapter 51 requirements. Safety factor 5:1. Material: transparent silicone. Hardness: 50° Shore (A). Density: 1.17 g/cm³. Operating temperature: from -65°C to +260°C. Hose length: 7.62 m, 15.24 m, or 30.48 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 180° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 2 bar to 8.12 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystal-clear, flexible chemical hose with a multi-layer construction featuring an inner layer made of FEP fluoropolymer with unique resistance and chemical inertness. It exhibits significantly greater flexibility than rigid hoses made entirely of Teflon or other fluoropolymers. The smooth inner layer, resistant and chemically inert, eliminates the risk of fluid contamination. Resistant to a wide range of chemicals from corrosive substances to MEK-based solvents. The hose meets hygiene requirements and is suitable for food contact: US FDA 21 CFR 177.1550, free from phthalates and BPA (Bisphenol A), non-toxic, and does not leave any odor or taste. Sterilization with ethylene oxide. Used in various industrial applications: chemical flow, pharmaceuticals, food and beverage production and packaging, paint, solvent and adhesive manufacturing, inks and toners, photographic chemicals, fertilizers and pesticides, in semiconductor production. Full hose roll length: 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: special FEP / PVC. Maximum operating temperature: +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible flat-folded suction hose with fittings for water for fire pumps. Used for fire, rescue, and forestry motor pumps. In addition to fire-fighting functions, widely used for water transfer in industry, construction, agriculture, and mining. The inner layer is smooth, resistant to mold and rot. The outer layer (braid) has high strength, with a polyurethane coating that does not retain dirt, increasing resistance to abrasion and contact with flames. Certifications: hoses compliant with the technical conditions of the MSWiA Regulation of April 27, 2010, hoses with fittings (complete hoses) have CNBOP-PIB approval certificates. Inner layer: smooth polyurethane. Reinforcement: polyester braid. Outer layer: red polyurethane coating. Working pressure: from 12 bar to 15 bar - depending on the hose diameter. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone pressure hose REDSIL has versatile applications over a wide temperature range. It is used for both hot air and, for example, in cooling systems. Designed for liquids and gases, it is employed in various industrial sectors, including the chemical industry. Inner layer: transparent silicone. Reinforcement: olpot PET (polyester). Outer layer: red silicone. Hardness: 70° ±5° Shore (A). Operating temperature: from -50°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 45° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arm lengths of 152, 250 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester inserts. Working pressure: from 1.5 bar to 8.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKnown and proven for years, a lightweight and soft natural rubber hose in light brown color. Easy to install due to its softness (hardness 40° Shore – A), flexibility, and elasticity (maximum elongation 500%). It has properties similar to latex. Abrasion-resistant, with good resistance to acids and bases. Used for liquids and gases, for various industrial applications such as dispensing and dosing soaps and detergents, alcoholic and dairy products, laboratories. Sterilization with steam for 30 minutes (1 bar, 141°C) or ethylene oxide. Full hose roll length is 50 m (from inner diameter 7 mm - 25 m). The specified working pressure is determined relative to the burst pressure with a safety factor of 1:5. Material: natural rubber (NR). Operating temperature: from -35°C to +70°C (120°C for moist heat). Brittleness temperature: -40°C. Hardness: 40° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the transmission of compressed air, for compressors, hammers, drills, and other pneumatic tools. Due to its low weight, flexibility, robust construction, and high working pressure, it has been accepted and successfully used for many years in construction (particularly in demolition companies), industry, and mining. Extremely durable and long-lasting due to high-quality materials and construction. Reinforced with a circumferentially woven polyester braid completely bonded and surrounded by rubber in the original hot extrusion process of the rubber mixture through the braid. UV resistant. The inner layer is smooth, ensuring minimal flow loss. The yellow, ribbed outer surface is resistant to abrasion, oils, and ozone, and is highly visible on construction sites. Flat when at rest, facilitating handling and storage. Resistant to longitudinal loads. Most commonly used with air couplings (spacing 42 or 41 mm) mounted with cast iron clamps (ordered separately). Also available in black. Use for high-pressure air should always be preceded by a risk analysis in the event of accidental disconnection or rupture of the hose and potential application of safeguards. Maximum working pressure established according to a safety factor of 4:1 approved by the manufacturer for air. Exceeding 1/3 of the specified breaking force is not recommended. Standard roll length: 200 m. Hose material: yellow NBR/PVC mixture with UV-resistant barrier, embedded in the polyester braid during the hose extrusion process. Working pressure: from 12.5 bar to 25 bar - depending on the hose diameter and temperature. Operating temperature: from -30°C to +75°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, popular general-purpose PVC hose. Used for air, water, and light chemicals in industry, agriculture, horticulture, and for domestic use. Roll length: 60 meters. Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure at 20°C: from 10 bar to 15 bar - depending on the hose diameter and decreases with increasing temperature. Operating temperature: from -5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone reducer connector reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Standard length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm3. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 1 bar to 7.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, highly flexible, unreinforced hose designed for non-pressurized (or very low pressure) transfer of water, beer, wine, alcohols, juices, and beverages. The absence of phthalates in the hose material makes it suitable for the transfer of milk and its derivatives, as well as alcohols with a volumetric concentration of up to 50% and temperatures up to +40°C. Not recommended for oils and fatty food substances. Also used for liquids in general industrial applications, for light chemicals (acids, bases), for solid substances (powders), and as protection for pipes, conduits, hoses, etc. For the hose, the stated pressure value is an indicative value of the recommended working pressure, assumed for a typical PVC hose, with a safety factor of 5:1. The use of the hose for a specific working pressure should be preceded by testing under working conditions. Standards and requirements: Food industry, food contact: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulated fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Working pressure: low, up to several bar, depending on temperature. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible rubber pressure hose, intended for water, paints, light chemicals, and air. Can be used for water-based epoxy and polyurethane dispersion paints. Not suitable for cellulose paints, chlorinated rubber, and others containing aromatic solvents such as toluene, xylene, or gasoline, as well as for oils, fuels, and aromatic hydrocarbons. For chemical applications, we recommend contacting Tubes International. Conductive inner and outer layer (R<105 Ω/m), outer layer resistant to ozone, aging, and weather conditions. Inner layer: black EPDM rubber. Reinforcement: polyester braid (DN6 ÷ DN25), 2 polyester braids (DN32 ÷ DN38). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very soft, extremely flexible and elastic hose characterized by high resistance to bending and lack of shape memory. Designed for air, water, and light chemicals. Maintains flexibility at low temperatures. Outer layer resistant to abrasion. Resistant to UV radiation and weather conditions. Hose material free from cadmium and silicone, complies with RoHS requirements. Roll length: 100 m. Inner layer: yellow (Y) or blue (BL) PVC. Reinforcement: polyester braid. Outer layer: yellow (Y) or blue (BL) PVC. Working pressure at 20°C: 20 bar. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and durable high-quality flat hose designed for trouble-free and maintenance-free operation in harsh field conditions. Used particularly for water, sludge, sewage, and other liquids. Made from hydrolysis and microbe-resistant polyurethane - polyether. Reinforced with a circumferentially woven polyester braid bonded and surrounded by polyurethane in the original hot thermoplastic polyurethane extrusion production process through braiding. The hose has high tensile strength, minimal elongation under pressure, and no tendency to kink or twist. Excellent abrasion and puncture resistance allows operation in heavy, uneven terrain and minimizes wear on the water-loaded hose during possible pressure pulsations. Due to its strength and durability combined with ease of handling (rewinding - unwinding), it is used in permanent and temporary high-pressure and high-efficiency water systems in the mining, energy, agriculture, and firefighting industries. Resistant to a wide range of chemicals, microbes, fungi, hydrolysis, weather conditions, UV, and ozone. To confirm the resistance and application conditions of the hose, contact Tubes International. Maximum working pressure for temporary use established according to a safety factor of 2:1 approved by the manufacturer (only for water and safe, non-flammable liquids). For maximum longevity, it is not recommended to exceed 1/3 of the bursting pressure. Standard roll length: 200 m. Hose material: black polyurethane - polyether (PU). Working pressure: from 15 bar to 21 bar - depending on the hose diameter and temperature. Operating temperature: from -50°C to +75°C (water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone hose reinforced with meta-aramid is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version made of fluorocarbon rubber is recommended. Standard length: 1000 mm (also available in lengths of 2000 mm and 3000 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Outer layer color: blue. Material: silicone rubber. Reinforcement: meta-aramid layers. Working pressure: from 1 bar to 8.75 bar (depending on hose diameter). Operating temperature: from -50°C to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone anti-vibration connector with one notch reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with fluorocarbon rubber is recommended. Pressure safety factor: 3:1. Complies with SAE J2006 R3 standard. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal flexible high-quality polyurethane hose produced in the United Kingdom. Designed for water, air, oils, fuels, lubricants, chemicals, and granules. As a non-reinforced hose, it is suitable for very low pressure up to several bar and as a protective hose. The crystal-clear wall allows for excellent observation of the medium. The smooth inner surface facilitates flow and cleaning. Stronger than similar PVC hoses, better at maintaining its shape, well resistant to kinking, flexible at low temperatures. Made from polyurethane – polyether, resistant to hydrolysis and abrasion. Contains no cadmium, silicone, plasticizers, or halogen compounds. According to EU regulations, use for food products is possible after conducting the required migration tests using appropriate model liquids simulating the specific type of food (the material used for hose production complies with FDA requirements 21 CFR 175.105, 177.1680, 177.2600, and WRAS for water at 23°C). Hose material: soft, transparent polyurethane (polyether) free of phthalates. Operating temperature: from -30°C to +70°C (temporarily up to +100°C). Brittleness temperature: -70°C. Recommended working pressure value: from 2.5 bar to 4.8 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases.
