Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose with a conductive inner layer (R 5 Ω/m) intended for natural gas (CNG - Compressed Natural Gas). Used for filling the tanks of CNG-powered vehicles. The outer layer is characterised by increased resistance to changing weather conditions and abrasion. Meets the requirements of NFPA 52, ANSI/CSA NGV 4.2-2014, CSA 12.52-2014. standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Working pressure: 345 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose with conductive fibres in the braid (R 4 Ω/m) intended for solvents, paints, isocyanate, polyol, water-based fluids. standards: ISO 8031, SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: a double polyester braid with conductive fibres. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Also available in a micro-perforated version (for gases and air), marked with the letters "MP" at the end of the index. Inner layer: polyamide. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 375 bar - depending on the diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. For use in the vicinity of transformers and medium- and high-voltage electrical installations. Non-conductive - leakage under the standard's test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: ANSI 92.2, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: orange polyurethane. Working pressure: from 70 bar to 230 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 77 bar to 235 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R8, ISO 3949-R8 (except DN8). Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 362 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 145 bar to 420 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 210 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: a double steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, antistatic (R 4 Ω/m) hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: ISO 8031, SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: a double aramid braid with conductive fibres. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hose intended for filling gas cylinders. An odourless inner layer compliant with the requirements of FDA 21 CRF, directive 2011/10/EC and CGA G-7.1-2004 (for breathing air). Must not be used for explosive gases, e.g. oxygen, hydrogen. Assembly: use type Z fittings. Inner layer: polyester. Reinforcement: an aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Suitable for operation in an environment of high humidity and salty air. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 500 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. For use in the vicinity of transformers and medium- and high-voltage electrical installations. Non-conductive - leakage under the standard's test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hose intended for CO2 systems in industrial and marine firefighting installations. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -60°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: polyurethane. Working pressure: from 210 bar to 250 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Resistant to very low temperatures and harsh weather conditions. standards: SAE 100R18, ISO 3949-R18. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: 210 bar. Operating temperature: from -55°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 245 bar to 350 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, antistatic (R 5 Ω/m) hose intended for natural gas (CNG - Compressed Natural Gas). Used for filling the tanks of CNG-powered vehicles. standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Resistant to salty sea water. Micro-perforated on request (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for natural gas (CNG - Compressed Natural Gas). Used for filling the tanks of CNG-powered vehicles. A twin version with a breather tube is available. standards: ISO 15500-17. Inner layer: conductive black polyamide. Reinforcement: one or two aramid braids + a synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible A hose intended for low-pressure industrial systems. Particularly recommended for autogas (LPG - Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other components of the system. In order to retain LPG type approval, special screw-on fittings made of brass must be fitted. standards: ECE R67-01. Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -25°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Also available in a micro-perforated version (for gases and air). Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 97 bar to 330 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
