Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible, classic rubber hose designed for compressed air (also oiled), water, and non-aggressive chemical liquids in industry and agriculture. Outer layer resistant to abrasion, aging, ozone, and weather conditions. Inner layer: black synthetic rubber. Reinforcement: synthetic braid. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: from -25°C to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction and discharge hose intended for the transport of food, pharmaceutical, and cosmetic substances: water, fruit juices, beer, wine, vinegar, alcohols up to 96% concentration, milk and its derivatives, creams, soaps, aromatic substances, pigments, and others. Resistant to fats and oils within standard usage range. Good chemical resistance to light chemicals – solutions of acids and bases. Extruded, completely smooth inner and outer surface of the hose facilitates flow and cleaning. Double reinforcement of the hose with a spiral and braid ensures good strength against overpressure and vacuum. The hose material is non-vulcanized, clean (contains no vulcanization additives), resistant to hydrolysis, does not promote bacterial growth, has low porosity and low permeability. Completely neutral in taste and odor, does not alter the organoleptic properties of the medium. Resistant to aging, weather conditions, and UV radiation. Hose cleaning, disinfection, or sterilization must be carried out strictly according to the recommendations provided in the catalog sheet below. Washing by SIP method is not recommended as it shortens the hose's service life. Application for high-proof alcohol (its vapors or other flammable substances) requires consideration of hazards related to static electricity. Norms and requirements: 1) Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulation fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 “e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: polyester braid, AISI 302 steel spiral. Working pressure: from 7 bar to 17 bar, depending on the hose diameter. Operating temperature: -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum straight connector perfect for connecting all silicone hoses and rubber tubes. Thanks to the profiled edges, it ensures excellent hose sealing. It is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). Material: aluminum. Standard connector length: 100 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible hose designed for the transport of air, vapors, dust, fine particles, powders, grains, and lightweight bulk materials. Intended for use in the food and pharmaceutical industries. Highly flexible and very compressible axially, also elastic at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: P2 PU FOOD – steel wire (copper-plated) spiral; P2 PU PAS FOOD – stainless steel wire spiral, hose material permanently antistatic (R ≤ 108 Ω, according to TRGS 727). P2 PU FOOD and P2 PU PAS FOOD hoses comply with European regulations 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP), and American FDA 21 CFR 177.2600 and 178.2010. Suitable for temporary contact with food during the transfer of dry, bulk, non-fatty food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.4 mm. Reinforcement: steel wire spiral (P2 PU FOOD), stainless steel wire AISI 301 spiral (P2 PU PAS FOOD). Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunctional PVC hose, soft, flexible, and elastic. Designed for water, air, and light chemicals. Often used for color differentiation of individual installation lines. Available in black upon special request. Can be used (at temperatures up to 40°C) for liquid and semi-liquid food products such as juices, beverages, beer, wine, alcohols with a concentration of up to 50%, milk, and its derivatives. Not recommended for oils and fatty food substances. The TCN COLOR hose complies with European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C, and D1), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: red (R) or blue (BL) PVC. Working pressure at 20°C: from 16 bar to 22 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, abrasion-resistant pressure hose designed for the transmission of drinking water in large quantities under high working pressure. Flat in a resting state, which facilitates handling and storage. With minimal elongation under pressure and no tendency to kink or twist. Reinforced with a circumferentially woven polyester braid, completely bonded and surrounded by thermoplastic polyurethane in the original hot extrusion production process through braiding. Meets requirements for the transmission of cold drinking water: PZH (no. B.BK.60110.0171.2022, valid until 01.04.2025), KTW-DVGW, WRAS(BS6920), and NSF61. Intended for permanent, temporary, and emergency drinking water supply installations. Used for delivering water to ships, in military field installations, humanitarian actions, mass event services, festivals, etc. Available in other diameters up to 305 mm upon special request. Maximum working pressure for temporary use established according to a safety factor of 2:1 approved by the manufacturer (only for water and safe, non-flammable liquids). To maximize lifespan, it is not recommended to exceed 1/3 of the bursting pressure and the specified breaking force. Standard roll length: 200 m. Hose material: blue polyurethane - polyether (PU) embedded in the braid (textile spacer) in the hose extrusion process. Working pressure: from 18 bar to 25 bar - depending on the hose diameter and temperature. Operating temperature: from -50°C to +75°C (for clean water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose intended for water, juices, beverages, and other food products. The absence of phthalates in the material allows the hose to be used for the transfer of milk and its derivatives, as well as alcohols with a concentration of up to 50% and temperatures up to +60°C. Not recommended for oils and fatty food substances. Reinforcement with a hard PVC spiral, resistant to impacts, ensures good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of flow. The smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface of the hose is also smooth, facilitating the installation of fittings using tapes or clamps, reducing external damage from abrasion, and making it easier to keep the hose clean. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons), as well as for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk substances (non-fatty). Abrasiveness and potential static electricity issues should be considered. As a hose reinforced only with a hard PVC spiral, lacking a braid, it exhibits some elongation under pressure, which should be taken into account in applications, especially at temperatures above +40°C. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: hardened PVC spiral. Working pressure: from 3 bar to 7 bar, depending on the hose diameter. Operating temperature: -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternally corrugated flexible and strong suction and discharge hose for water and sewage. It is characterized by good resistance to external damage and harsh operating conditions, as well as resistance to UV radiation and low temperatures. Used in irrigation systems, tankers, for flushing sewers, and emptying septic tanks. Also used in industrial installations. Hose material: gray-purple PVC. Reinforcement: hard PVC spiral. Working pressure: from 3 bar to 8 bar, depending on the hose diameter and temperature. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, soft, and flexible, easy to operate food-grade suction hose designed for the transfer of food substances requiring the use of odorless and tasteless rubber. Free from phthalates and bisphenol A. Suitable for milk and its derivatives, as well as wine, beer, and fruit juices. Not recommended for oils and fatty food substances. The outer layer of the hose is resistant to abrasion and weather conditions. Standards and requirements: Food industry, food contact 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI cat. 2. Inner layer: white natural rubber (NR). Reinforcement: synthetic cord. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, and pliable suction hose resistant to temperature, designed for the discharge of gases, vapors, smoke, and high-temperature air. Flame-retardant, resistant to hot sparks within a certain range. Mainly used in the metallurgical, foundry, ceramic, and glass industries, around furnaces, engines, and as thermal insulation. Characterized by high compressibility - up to 1:6, strong construction due to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used exclusively as a suction hose operating under vacuum, due to the possibility of gas permeation when under pressure (degassing). Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with left-handed bridge clamps. Standard length: from 2 to 10 m - contact Tubes International. Hose material: impregnated glass fabric with stainless steel fibers, externally gray. Reinforcement: external spiral made of wire and galvanized steel sheet. Operating temperature: from -50°C to +400°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose, intended for general industrial applications (in industry, construction, agriculture). It can be used for water, light chemicals, sludges and wastewater, plant protection products, other liquids (excluding fats, oils, and hydrocarbons) as well as for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk materials (non-greasy). Abrasiveness and potential static electricity issues should be considered. In the food industry, it can be used for the transfer of hydrated food, acidic substances, and alcohols up to 20%, e.g., juices, beverages, beer, wine (simulants A, B, C; up to +60°C and 2 hours). Not recommended for milk and its derivatives, as well as oils and fatty food substances. Reinforced with a hard PVC spiral, resistant to impact, ensures good vacuum resistance and prevents hose collapse. The smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is slightly corrugated, smooth for small diameters. The FLORIDA hose complies with European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent PVC. Reinforcement: hard PVC spiral (gray). Working pressure for a temperature of 20°C: from 3 bar to 6.5 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, lightweight, and strong suction-discharge hose designed for the transport of water, sewage, sludge, non-corrosive liquids, and natural fertilizers (manure). The inner layer is made of smooth synthetic rubber, resistant to sludge and sewage. The corrugated outer layer provides a small bending radius and is resistant to ozone, weather conditions, and aging. Intended for agricultural, construction, and industrial applications, used for emptying septic tanks, as a suction hose for water and sewage pumps, for drainage and irrigation, and for tankers. Can be used for air extraction, dust, and bulk materials. Installation – depending on the diameter and type of fittings using steel bands, clamps, brackets, or compression sleeves. Inner layer: black synthetic rubber (SBR). Reinforcement: synthetic cord, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Chemically resistant, UV resistant, and aging resistant. Used, among others, for gas extraction in the metallurgical industry, foundries, glass and ceramic industries, for hot air in industrial dryers, in printing houses and paper mills, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding gases. Smooth inside (when straightened), with a very small bending radius allowing easy installation in tight spaces of equipment and vehicles. Not recommended for continuous dynamic bending. Installation with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: glass fabric impregnated with red silicone. Reinforcement: internal spiral of steel wire, external strand of fiberglass. Operating temperature: from -70°C to +250°C (temporarily up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality suction hose designed for the transfer of wine, beer, fruit juices, etc., and food substances that do not contain fats, requiring the use of odorless and tasteless rubber. Free from phthalates and bisphenol A. Designed for high-class wines and spirits, for use in breweries and distilleries. Widely used in the spirits industry for the transfer of strong alcohols with concentrations up to 96%. Features copper wires ensuring electrical continuity between the hose ends, which increases the safety of transferring high-proof, flammable alcohol (ensure contact of the wire with the end during installation). The outer layer is resistant to abrasion, aging, and weather conditions. Standards and requirements: Food industry, food contact 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA 21 CFR 177.2600, BfR XXI cat.2, D.M. 21/03/73. Inner layer: white butyl rubber (IIR). Reinforcement: synthetic cord. Outer layer: red butyl rubber (IIR). Working pressure: 10 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible five-layer hose for compressed air. Lightweight, very flexible even at low temperatures, resistant to elongation. Antistatic (R <106 Ω/m, EN ISO 8031), resistant to elevated ambient temperatures, suitable for disinfection. Specifically designed for breathing apparatus in accordance with EN 14593 and EN 14594 standards. Used in the paint industry, petrochemical industry, construction, and nuclear energy. Available on special order in DN6 and DN10 in green color. Inner layer: black, antistatic PVC. Reinforcement: polyester braid. Outer layer: blue PVC. Working pressure: 15 bar (6 bar at 70°C). Operating temperature: from -20°C to +70°C (temporarily up to +80°C), working pressure dependent on temperature.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose designed for suction and transport of granules and other bulk materials. Intended for use in various types of industry. Used for plastic granules, insulation materials, waste, sand, and other construction materials. Quite flexible, low compressibility, smooth inside, elastic even at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Installation on couplings with bridge clamps (right-handed). Other diameters may be available. In addition to the standard version P7 M PU AE, the hose is available in the P7 M PU EL version, which is electrically conductive (R ≤104 Ω), compliant with ATEX 2014/34/EU, TRBS 2153, and for suction also with TRGS 727, it can be used in explosion hazard zones after conducting a risk assessment. Hose material: polyester-polyurethane. Wall thickness measured between the spiral: 1.4 mm. Reinforcement: spiral with steel wire. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible hose designed for the transfer of food, pharmaceutical, and cosmetic substances: water, fruit juices, beer, wine, vinegar, alcohols up to 96% concentration, milk and its derivatives, creams, soaps, aromatic substances, pigments, and others. Resistant to fats and oils in standard usage conditions. Good chemical resistance to light chemicals – solutions of acids and bases. Extruded, completely smooth inner and outer layers of the hose facilitate flow and cleaning. The hose material is non-vulcanized, clean (contains no vulcanization additives), resistant to hydrolysis, does not promote bacterial growth, has low porosity and low permeability. Completely neutral in taste and odor, does not alter the organoleptic properties of the medium. Resistant to aging, weather conditions, and UV radiation. Hose cleaning, disinfection, or sterilization should be carried out strictly according to the recommendations provided in the catalog sheet below. Cleaning by SIP method is not recommended as it significantly shortens the service life. Use for high-proof alcohol (its vapors or other flammable substances) requires consideration of hazards related to static electricity. Standards and requirements: 1) Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulants A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 "e". 2) Pharmaceutical industry USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: polyester braid. Working pressure: from 7 bar to 12 bar, depending on the hose diameter. Operating temperature: -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible, popular general-purpose PVC hose. Used for water, air, light chemicals in agriculture, horticulture, industry, and for domestic use. Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: green transparent PVC. Working pressure at 20°C: from 10 bar to 17 bar - depending on the hose diameter. Operating temperature: from -5°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, highly flexible, unreinforced hose produced in the United Kingdom. Designed for non-pressurized (or very low-pressure) transmission of air, water, and liquids in general industrial applications, for light chemicals (e.g., diluted acids and bases), in laboratory applications, for level indicators, and as protection for pipes, conduits, hoses, etc. The hose material is free from phthalates, silicone, and cadmium, compliant with REACH, RoHS, and WEEE regulations. According to EU regulations, use for food products is possible after conducting the required migration tests using appropriate model fluids simulating the specific type of food (the material used for hose production complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing according to UL94-V2 and UL94-HB (at a thickness of 3 mm). The stated working pressure is an indicative value of the recommended working pressure with a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: from -20°C to +55°C (temporarily up to +65°C, working pressure dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and thick, flexible hose designed for suction and transport of abrasive bulk materials, granules, sand, gravel, pebbles, agricultural substrate. Used for loading and unloading silos, vehicles, and suction excavators, transloading from tankers, etc. Thick wall and fairly dense reinforcing spiral provide high resistance to pressure and vacuum. Smooth inside, non-compressible, quite flexible (r=2.5xD), elastic even at low temperatures. Hose with good abrasion resistance, also resistant to oils and gasoline. Installation on couplings with bridge clamps (right-handed) or special installation on industrial ends, e.g., flanges. Other diameters may be available upon special request. Versions: P3 SV PU – with polyester – polyurethane, very abrasion resistant; P3 SV PU AE - version with polyether – polyurethane, abrasion resistant, resistant to microbes and hydrolysis, compliant with European regulations 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. Suitable for temporary contact with food during the transfer of dry, bulk, non-fatty substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent polyester-polyurethane (P3 SV PU), polyether – polyurethane (P3 SV PU AE). Wall thickness measured between the spiral: 2.5 mm. Reinforcement: spiral made of steel wire. Operating temperature: from -40°C to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose designed for sewage and water. Corrugated on the outside, nearly smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (it returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It remains flexible at low temperatures. The hose is commonly used for emptying septic tanks and portable toilets, in construction, tourist facilities, marinas, and airports. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76mm); 0.85 bar (for diameter 102mm). Operating temperature: from -40°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible pressure hose designed for the transfer of water, juices, beverages, and other food products at temperatures up to +40°C. The absence of phthalates in the hose material makes it suitable for the transfer of milk and its derivatives, as well as alcohols with concentrations up to 50% and temperatures up to +40°C. Not recommended for oils and fatty food substances. Also widely used in industry and laboratories for compressed air, gases, and light chemicals. The reinforcement with a spiral braid ensures high pressure resistance and low deformation of the hose under pressure, even with pressure pulsations (within the working pressure range). Standards and requirements: Food industry, food contact: compliant with European regulations 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: polyester braid. Working pressure: from 9 bar to 27 bar, depending on the hose diameter. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for fatty and non-fatty food substances, requiring the use of odorless and tasteless rubber. It contains no plasticizers, phthalates, or animal-derived substances. Particularly recommended for handling and heavy working conditions. Widely used in the food industry in dairies and oil mills. The inner layer made of NBR is resistant to commonly used cleaning agents and processes in the food industry. The outer layer is resistant to temporary contact with animal and vegetable fats, abrasion, and weather conditions. Standards and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Food industry, food contact: EC 1935/2004, EC 2023/2006 (GMP). The inner layer complies with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards. RAL (German Institute for Quality Assurance and Certification). Vacuum: 0.9 bar. Inner layer: white NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: blue CR rubber. Working pressure: 10 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, exceptionally flexible and compressible hose designed for air conditioning, air exhaust and blowing, and welding fume extraction. Widely used for extraction arms, ventilation, tent heating, and drying of construction structures. Self-extinguishing and non-flammable (flame-retardant) according to UL94 V-0. Resistant to hydrolysis and microbes. Other diameters ranging from 30 to 800 mm and colors: black, blue, white, and yellow are available upon special order. Hose installation on couplings with bridge clamps (right-handed). Hose material: polyester fabric impregnated with gray PVC. Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -30°C to +80°C (temporarily up to +100°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose designed for water-cooled exhaust systems of diesel engines in motorboats up to 24 meters in length and yachts (free discharge under low pressure of mixed exhaust gases and cooling water). Used in sections between installation components. Inner layer resistant to exhaust gases. Steel spiral ensures resistance to vacuum. Outer layer resistant to abrasion, oil, and weather conditions. The hose is available in two versions of the outer layer: smooth - AMALFI LL and corrugated - AMALFI LO. Compliant with ISO 13363:2016 type 2B, SAE J2006:2013 type R2. It has Lloyds type certificate LR2003044TA and RINA DIP021521CS/002 (AMALFI LL) and RINA DIP021521CS/003 (AMALFI LO). Other diameters and the AMALFI CORD discharge hose (without steel spiral) are available on special order. Inner layer: black synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Burst pressure: ≥2.5 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and durable high-pressure air hose. Designed for use in harsh working conditions – "heavy duty." The outer layer is resistant to aging, ozone, and weather conditions. Used in industry, mining, quarries, construction, road construction, etc. Available on special order: 1. outer layer compliant with MSHA; 2. inner layer resistant to oil mist; 3. other diameters, pressures, and colors; 4. version resistant to temperatures up to 100°C. Possibility of installing hose fittings. Standard length: 60 m or 120 m. Inner layer: black SBR rubber. Reinforcement: double steel braid. Outer layer: yellow EPDM rubber. Working pressure: from 30 bar to 70 bar - depending on the hose diameter. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for the transfer of liquid food substances, drinking water, and chemicals. The inner layer of the hose is made of high-density polyethylene (HDPE) of food quality. This material meets high requirements for drinking water regarding the absence of migration of components to the water remaining in the hose and the lack of tendency to form biofilm (microbiological test). At the same time, it meets food contact requirements for liquid food substances and has very high chemical resistance (acids, bases, hydrocarbons, solvents). Therefore, the hose can be used for: 1) drinking water installations (Germany: KTW, DVGW); 2) liquid food substances (water, fruit juices, alcohols, milk and its products, fats and oils); 3) chemicals in a wide range (selection in contact with Tubes International Sp. z o.o.). Thanks to the multi-layer construction of the hose, where the intermediate and outer layers are made of soft polyethylene, the hose is very flexible. For installation, fittings with a spigot ("tail" for the hose) without sharp notches that could cut the inner layer of HDPE upon tightening should be used. Standards and requirements: 1) Food industry, food contact - compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP). 2) Approval for drinking water KTW-A (certificate from the German Institute of Hygiene) and DVGW W270 (microbiological material test). Inner layer: HDPE polyethylene. Intermediate layers: natural soft polyethylene PE. Reinforcement: polyester braid. Outer layer: blue soft polyethylene PE. Working pressure: 16 bar, dependent on temperature. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Reinforced version of the NEOPRENE 1 hose, with two layers of fabric impregnated with neoprene and a steel spiral placed between the layers. Chemically resistant, UV resistant, and aging resistant. Used, among others, for hot air in granulate dryers and film blowers in plastic processing, in paint dryers in printing houses, other industrial dryers, in the electronics industry, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding gases. Smooth inside (in a straightened state), with a small bending radius allowing easy installation in tight spaces of equipment and vehicles. Installation with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: two glass fabrics impregnated with black CR rubber (Neoprene® - chloroprene rubber). Reinforcement: steel wire spiral, with two fiberglass cords on the outside. Operating temperature: from -35°C to +135°C (temporarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable pressure hose designed for the transport of industrial water, sewage, sludges, etc. Inner layer: black smooth SBR rubber. Reinforcement: high-strength synthetic cord. Outer layer: black SBR rubber. Working pressure: 10 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible, wrinkle-resistant hose designed for the transport of air, smoke, fiber dust, dirt, and other lightweight substances. Used in industrial vacuum cleaners. Made of conductive polyethylene (PE) and elastomer, with low material resistance, excellent for applications where the accumulation of electric charges must be avoided (the hose must be effectively grounded). The external reinforcing spiral shaped in the hose profile, left-handed, allows for the attachment of appropriate fittings for vacuum cleaners with left-threaded connections, e.g., plastic fittings for EVA hose: DN32, 38, and 50 or suitable conductive fittings. Hose installation is also possible using clamps on appropriate ends, pipe fittings, etc. The hose with diameters DN38 and DN50 has a declaration of conformity with ATEX requirements and TRGS 727 standards and can be used in explosion hazard zones, provided the hose is effectively grounded and a risk analysis is conducted by the user. Hose material: black special polyethylene (PE) and elastomer. Reinforcement: reinforcing spiral shaped in the hose material. Operating temperature: from -20°C to +60°C (operating vacuum depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong pressure hose with thick walls, designed for the transfer of food substances requiring the use of odorless and tasteless rubber. Free from phthalates and bisphenol A. The hose is specially designed for the transfer of oils and fats. Widely used in the oil and fat industry. The outer layer is fully resistant to grease and aging. Standards and requirements: Food industry, food contact 1935/2004/EC and 2023/2006/EC (GMP). Inner layer compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white NBR/PVC rubber. Reinforcement: two layers of synthetic cord. Outer layer: blue CR rubber. Working pressure: 10 bar. Operating temperature: -15°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible flat-folded suction hose for water for hydrants and fire pumps, without fittings. The hydrant hose complies with the EN 14540 standard and is used in internal hydrants according to EN-671-2. The hose for pumps is used for fire, rescue, and forestry motor pumps. In addition to fire-fighting functions, it is widely used in industry, construction, agriculture, and mining. It can be used for the transmission of water, seawater, industrial water, and solutions of certain chemical substances. The inner layer is smooth, resistant to mold and rot. The outer layer (braid) is of high strength, resistant to weather conditions and abrasion. Also available in a yellow luminescent version (DN52, DN75, 20m, for pumps). Certifications (Poland): Hoses comply with the technical conditions of the MSWiA Regulation of April 27, 2010. Inner layer: PVC insert (PU for DN110). Reinforcement: polyester braid. Working pressure: from 12 bar to 15 bar - depending on the hose diameter. Operating temperature: from -30°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose designed for the transmission of drinking water, cold (+23°C) and hot (+60°C). Its white, mirror-like inner surface prevents biofilm formation on the walls and is easy to maintain. It does not negatively affect health properties, is free from phthalates, ADI (animal-derived contaminants), and other hazardous substances subject to restrictions according to REACH. It does not cause changes in the organoleptic properties of water even at elevated temperatures. The outer layer is resistant to abrasion, ozone, and weather conditions. Cleaning: steam at +120°C for a maximum of 30 minutes (in an open system), other (CIP) in consultation with Tubes International. Standards and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Approval for drinking water: PZH B.BK.60110.0823.2022 (valid until 10.08.2025), UBA guideline, KTW, DVGW W270, D.M.174. 3) Food industry, contact with food: EC 1935/2004, EC 2023/2006 (GMP); EC 10/2011 (inner layer). Inner layer: smooth with a mirror-like surface technopolymer. Reinforcement: synthetic braid. Outer layer: blue technopolymer. Working pressure: from 10 bar to 20 bar, depending on the hose diameter. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, highly flexible and bendable hose designed for the discharge of aggressive chemical vapors and gases, ventilation, and air conditioning. Good chemical resistance to solvents and other aggressive vapors. Chemical resistance verification - chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Resistant to hydrolysis and biological corrosion. Does not contain halogen compounds and plasticizers. Mainly used in the chemical industry. Available on request in diameters ranging from 40 to 610 mm. The hose is available in two versions: P2PE - standard and P2PE EL - electrically conductive with a resistance of R ≤104 Ω, compliant with the ATEX directive 2014/34/EU and the TRGS 727 standard, made of black polyethylene. Hose material: polyethylene (PE), transparent - standard version P2PE, black - electrically conductive version P2PEEL. Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible medium-thickness hose designed for the extraction and transport of powders, grains, light granules, and other bulk materials. Intended for use in the food and pharmaceutical industries. Used, among others, for powdered milk, grains, rice, coffee, tea, flour (PAS version). Flexible, fairly compressible, almost smooth inside, elastic even at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: P7 OL PU FOOD – steel wire (copper-plated) spiral; P7 L PU PAS FOOD – stainless steel spiral, hose material permanently antistatic (R ≤108 Ω, according to TRGS 727). The P7 OL PU FOOD and P7 L PU PAS FOOD hoses comply with European requirements 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP), and American FDA 21 CFR 177.2600 and 178.2010. Suitable for temporary contact with food during the transport of dry, bulk, non-fatty food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: steel wire spiral (P7 OL PU FOOD), stainless steel AISI 301 wire spiral (P7 L PU PAS FOOD). Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable, lightweight, and highly flexible (even at low temperatures) suction and discharge hose designed specifically for the wine industry for heavier working conditions. Stronger than the SPIRABEL® SNTS hose, with a thicker wall. A hose for demanding applications, intended for the transfer of water, beer, quality wines, and spirits with concentrations up to 50% and temperatures up to +40°C, juices, beverages, and other food products. Phthalate-free, allowing it to be used for milk and its derivatives. Not recommended for oils and fatty food substances. Reinforced with a hard PVC spiral, resistant to impacts, provides very good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of the substance flow. The smooth inner surface reduces flow losses and ensures ease of cleaning. The ease of cleaning is also provided by the smooth outer surface, which is available in hoses up to 63 mm in diameter. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk substances (non-fatty). Abrasiveness and potential static electricity issues should be considered. As a hose reinforced with a hardened PVC spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at temperatures above +40°C. Standards and requirements: Food industry, food contact: Compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: hardened PVC spiral. Working pressure: from 5 bar to 7 bar, depending on the hose diameter. Operating temperature: -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible hose designed for the transport of air, dust, powders, fine wood shavings and chips, very light bulk materials, etc. Suitable for all types of industry, particularly commonly used for dust extraction and the removal of fine solid particles in the woodworking, furniture, ceramics, and plastics industries. Highly flexible and very axially compressible, also elastic at low temperatures. Good abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. Wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: ECO – standard version, ECO SE – version made of flame-retardant material (without fire classification), ECO AS – permanently antistatic version (ISO 8031: R <109 Ω, TRGS 727 (6.4.2.4): R <2.5 x 108 Ωm, directive 2014/34/EU (ATEX): can be used in specific explosion hazard zones after risk analysis), ECO SE AS – antistatic and flame-retardant version (available on special request). The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials from the recycling of clean production waste, renewable energy, closed water cycles, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose for demanding, versatile applications in the food industry. Excellent for the transfer of various types of food products such as: olive oil, wine, beer, fruit juices, milk, fats, and alcohols with a concentration of up to 96%. The inner layer is odorless and tasteless. It does not contain phthalates and bisphenol A, as well as polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for heavy metals. The outer layer is resistant to weather conditions and ozone. Thanks to the external corrugation, the hose is exceptionally flexible and elastic. The recommended method of installation with fittings is special EASY SHELL clamp shells, shaped to fit the hose's corrugation. Standards and requirements: Food industry, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). The inner layer complies with FDA 21 CFR 177.2600, BfR XXI cat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: synthetic cord, steel spirals. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible water delivery hose for general use manufactured in France. Multi-layer construction and strong woven reinforcement ensure high flexibility and prevent twisting, facilitating manual handling of the hose. Very good resistance to repeated bending, crushing, and stretching. Low deformation under pressure. Smooth inner layer ensures good flow. Outer layer resistant to abrasion, aging, and UV radiation. Due to its design, particularly recommended for irrigation systems in agriculture, horticulture, as well as in construction and roadworks. Inner layer: two-layer, black PVC. Reinforcement: strong woven polyester braid. Outer layer: two-layer yellow PVC. Working pressure: from 8 bar to 10 bar - depending on hose diameter and temperature. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, single-layer, highly flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Chemically resistant, UV resistant, and aging resistant. Used, among others, for hot air in granulate dryers and film blowers in plastic processing, in paint dryers in printing houses, other industrial dryers, in the electronics industry, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding gases. Smooth inside (when straightened), with a very small bending radius allowing easy installation in tight spaces of equipment and vehicles. Mounted with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: glass fabric impregnated with black CR rubber (Neoprene® - chloroprene rubber). Reinforcement: internal spiral of steel wire, external strand of fiberglass. Operating temperature: from -35°C to +135°C (temporarily up to +150°C).
